1. Product Overview
The HiBREW H2B is a versatile 5-in-1 espresso machine designed to brew a variety of coffee types using different capsule systems and ground coffee. It features both hot and cold brewing modes, a powerful 20-bar pump, and adjustable water volume for a customized coffee experience.
Key Features:
- 5-in-1 Compatibility: Supports DG Capsule, Ns Capsule, Ground Coffee, ESE coffee pods (44mm), and K-cup adapters.
- 20 Bar Pressure: Ensures high-quality espresso extraction.
- Hot & Cold Brewing: Enjoy your coffee hot or cold with a simple mode switch.
- 7-Level Water Volume Selection: Customize coffee strength and volume.
- Fast Heating: Rapid heating for quick preparation.
- Precise Temperature Control: Maintains optimal brewing temperature.
- Stable Pressure: Consistent pressure for perfect extraction.
- 600ml Removable Water Tank: Easy to fill and clean.
- Anti-Dry Protection: Safety feature to prevent damage.
- Large Mug Space: Accommodates standard mugs up to 95mm (3.7 inches) in height.
Components:
- Main Coffee Machine Unit
- NS Adapter
- DG Adapter
- Ground Coffee Adapter
- ESE Pod Adapter (44mm)
- K-cup Adapter
- Removable Drip Tray
- Water Tank (600ml)
2. Safety Instructions
Please read all safety instructions carefully before using the appliance to prevent personal injury or damage to the machine.
- Always ensure the machine is placed on a stable, flat surface.
- Do not immerse the appliance, power cord, or plug in water or any other liquid.
- Keep hands and fingers away from hot surfaces and moving parts during operation.
- Unplug the machine from the power outlet when not in use and before cleaning.
- Do not operate the machine with a damaged cord or plug. Contact customer support for repairs.
- This appliance is for household use only. Do not use outdoors.
- Ensure the water tank is filled with clean, cold water before brewing.
- Do not open the brewing chamber during operation as hot water and steam may escape.
3. Setup
Unpacking:
- Carefully remove all packaging materials and the coffee machine from the box.
- Check that all components and accessories are present and undamaged.
- Retain packaging for future storage or transport.
Initial Preparation:
- Place the machine on a clean, dry, and stable surface.
- Fill the removable water tank (600ml capacity) with fresh, cold water. Ensure the water level is between the MIN and MAX marks.
- Place the drip tray in position.
- Connect the power cord to a suitable electrical outlet. The machine supports AC 220-240V 50/60HZ or AC 110-127V 60HZ, depending on your region's plug type (EU, UK, US).
First Use / Rinsing:
Before brewing coffee for the first time, it is recommended to run a cleaning cycle to rinse the internal components:
- Fill the water tank.
- Place an empty cup on the drip tray.
- Do not insert any coffee capsule or adapter.
- Press the power button to turn on the machine.
- Select a medium water volume (e.g., 3-4 bars).
- Press the brew button to start the cycle.
- Discard the water in the cup. Repeat this process 2-3 times.
4. Operation
Brewing Coffee:
- Ensure the water tank is filled.
- Open the brewing chamber handle.
- Insert the appropriate adapter for your chosen coffee format (DG capsule, NS capsule, ground coffee, ESE pod, or K-cup).
- Place your cup on the drip tray. The machine can accommodate mugs up to 95mm (3.7 inches) in height.
- Close the brewing chamber handle securely.
Hot Brew Mode:
- Click the power button to enter hot mode (red light).
- Select your desired coffee volume using the water volume selection buttons (7 levels available).
- Click the brew button (coffee cup icon) to start brewing.
Cold Brew Mode:
- Press and hold the power button for 2 seconds to enter cold mode (blue light).
- Select your desired coffee volume using the water volume selection buttons (7 levels available).
- Click the brew button (coffee cup icon) to start brewing.
5. Maintenance
Regular cleaning and maintenance will ensure the longevity and optimal performance of your coffee machine.
Daily Cleaning:
- Drip Tray: Remove and empty the drip tray after each use. Wash with warm, soapy water and rinse thoroughly.
- Water Tank: Empty any remaining water from the tank daily. Rinse with fresh water and refill before next use.
- Adapters: Remove and rinse the used adapter after each brew. Ensure no coffee grounds or residue remain.
- Exterior: Wipe the exterior of the machine with a soft, damp cloth. Do not use abrasive cleaners or scouring pads.
Descaling:
Over time, mineral deposits can build up inside the machine, affecting performance. Descale your machine every 3-6 months, or more frequently if you have hard water.
- Empty the water tank and fill it with a descaling solution (follow the descaling product's instructions) or a mixture of white vinegar and water (1:1 ratio).
- Place a large container under the coffee spout.
- Run several brewing cycles without a coffee capsule until the water tank is empty.
- Rinse the water tank thoroughly and fill it with fresh water.
- Run several more cycles with fresh water to rinse out any descaling solution residue.
6. Troubleshooting
If you encounter issues with your HiBREW H2B machine, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Water/Coffee not coming out | Water tank empty; Clogged needle/spout; Air bubble in pump. | Refill water tank; Clean the needle/spout; Run a few cycles without coffee to clear air. |
| Lever stuck / Cannot open capsule holder | Pressure build-up; Capsule jammed. | Allow machine to cool down; Gently try to open the lever; Ensure correct capsule insertion. |
| Nespresso capsule explodes / Coffee unsuitable | Incorrect capsule type; Adapter not properly seated. | Ensure you are using compatible Nespresso capsules and the adapter is correctly inserted. |
| Cold extraction is watery | This can be a characteristic of cold brew. | Adjust water volume to a lower setting for a stronger concentration, or use more coffee grounds/stronger capsules. |
| Machine is loud during operation | Normal pump operation; Air in the system. | Some noise is normal. If excessively loud, run a few cycles without coffee to clear air. |
| Water not coming from nozzle, but from steam vent/tank | Internal blockage or seal issue. | Stop use immediately and contact customer support. |
7. Specifications
| Feature | Specification |
|---|---|
| Brand | HiBREW |
| Model | H2B |
| Rated Power | 1450W |
| Pump Pressure | 20 Bar |
| Rated Voltage | AC 220-240V 50HZ / AC 220-240V 60HZ / AC 110-127V 60HZ |
| Housing Material | Plastic |
| Water Tank Capacity | 600ml |
| Unit Size (L*W*H) | 275*115*252mm (10.8*4.5*9.9 inches) |
| Package Size (L*W*H) | 315*143*279mm (12.4*5.6*10.9 inches) |
| Net Weight / Gross Weight | 2.8kg / 3.6kg |
| Certifications | CB, CE, GS, LFGB, UL, UR |
8. User Tips
- The machine is compatible with both 50Hz and 60Hz electrical systems.
- The H2B BK model typically includes all necessary adapters for various coffee formats.
- For a richer cold brew, consider using a lower water volume setting or stronger coffee.
- The machine produces good foam, enhancing the quality of your coffee beverages.
- Ensure all adapters are properly seated to prevent issues like capsule explosions or poor extraction.
9. Warranty and Support
Your HiBREW H2B coffee machine comes with a One Year Warranty from the date of purchase, covering manufacturing defects and malfunctions under normal use.
For technical support, warranty claims, or any inquiries, please contact HiBREW customer service:
- Email: info@hibrew.cn
Please retain your proof of purchase for warranty validation.
