RHUNDO RV-31

Contents

RHUNDO Dual USB Car Charger RV-31 Instruction Manual

Model: RV-31

Brand: RHUNDO

Introduction

The RHUNDO RV-31 Dual USB Car Charger is a versatile device designed to provide power and monitoring capabilities in your vehicle. It features a touch-sensitive button for easy control, fast charging ports, and multiple display modes including voltage, amperage, temperature, and a timer. Unique functions like Power-on Delay and Automatic Power-off help protect your devices and conserve your car's battery.

Video demonstrating the RHUNDO RV-31 Dual USB Car Charger's features, including installation, display modes, and power-on/off functions.

Setup

  1. Insert into DC Outlet: Plug the RV-31 car charger firmly into your vehicle's 12V DC cigarette lighter socket. The display should illuminate, showing the current voltage.
  2. Connect Devices: Use appropriate USB cables to connect your devices (e.g., smartphone, dash cam) to the USB charging ports.
  3. Connect Temperature Sensor (Optional): If you wish to monitor temperature, connect the external 2.5mm headset plug temperature sensor cable to the corresponding jack on the unit.
RHUNDO RV-31 Car Charger installed in a vehicle's DC outlet, displaying voltage.

The RV-31 charger securely installed in a car's DC outlet, showing the digital display.

RHUNDO RV-31 Car Charger with a temperature sensor cable connected.

Connecting the external temperature sensor cable to the RV-31 unit.

Diagram showing the components of the RHUNDO RV-31 car charger: Temp Sensor Jack, 5V/3.1A Port, 20W Fast Charging Port, LED Indicator, 3-digit Display, Touch Sensitive Button.

Key components of the RV-31 Dual USB Car Charger.

Operating Instructions

Touch-Sensitive Button Functions

The touch-sensitive button on the RV-31 allows for various controls:

  • Switch On & Off: Briefly touch to switch on, touch and hold to switch off.
  • Alternate Display Modes: Briefly touch to cycle through Voltage, Amperage, Temperature, and Timer displays.
  • Check Output Voltages for Port 1: In Amp mode, double-touch the button to affect the output voltages of Port A.
  • Clear Timer Readings: Reset the timer.
  • Clear Low-Voltage Alert: Acknowledge and clear low voltage warnings.
  • Configure Functions 1-6: Access and adjust advanced settings.
Diagram illustrating the functions of the touch-sensitive button on the RV-31 car charger, including switching on/off, alternating display modes, checking output voltages, clearing timer, clearing low-voltage alert, and configuring functions.

Functions controlled by the touch-sensitive button.

Multi-mode Display

The RV-31 can display four different modes by briefly touching the touch-sensitive button:

  • Voltage: Shows the current input voltage from the car's DC outlet.
  • Amperage: Displays the current drawn by connected devices.
  • Temperature: Shows the temperature reading from the external sensor (if connected).
  • Timer: Displays a countdown or elapsed time, depending on the configured function.
Diagram showing the four display modes of the RV-31: Voltage, Amperage, Temperature, and Timer, and how to switch between them by touching the button.

Switching between Voltage, Amperage, Temperature, and Timer display modes.

Fast Charging Capabilities

The RV-31 features two USB ports with distinct charging capabilities:

  • Port 1 (Fast Charging Port): Supports mainstream fast charging protocols such as QC2.0/3.0, FCP, AFC, and SFCP, with a maximum output of 20W.
  • Port 2 (Standard Output): Provides a standard 5V/3.1A output.

Both ports have their own controller chips for independent outputs. When fast charging is active, the LED indicator will glow amber.

Diagram illustrating the fast charging features of the RV-31, showing Port A (20W Fast Charging) and Port B (5V/3.1A), internal components, and how to charge phones and power dash cams.

Details on fast charging ports and independent outputs.

Configuring Functions (Fn.1 - Fn.6)

The RV-31 offers six configurable functions to enhance its utility. When a setting is completed, "SET" will be displayed on the screen.

Diagram showing the six configurable functions (Fn.1 to Fn.6) of the RV-31: Power-on Delay, Auto Power-off, Threshold Voltage, Temperature Display, Voltage Offset, and Over-heating Cut-off.

Overview of configurable functions Fn.1 to Fn.6.

  • Fn.1: Power-on Delay (1-30 Seconds)

    This feature protects attached appliances (like dash cams) from voltage surges during engine startup. Once set, the unit will not switch on until the specified delay time has elapsed after the engine starts.

    Diagram illustrating how the Power-on Delay Timer works: engine starts, unit times while off, then switches on after the set delay.

    How the Power-on Delay function operates.

  • Fn.2: Auto Power-off (1-120 Minutes)

    Designed for vehicles with "always on" type of outlets. This function allows you to set a duration after which the unit automatically powers off once the engine is shut off, preventing battery discharge. The display will flash "APO" before powering off.

    Diagram showing the Automatic Power-off Delay feature, including setting the timer and the 'APO' flashing before the unit turns off.

    Automatic Power-off Delay mechanism.

  • Fn.3: Threshold Voltage (11.0V-14.0V)

    Sets the voltage threshold for the Auto Power-off (Fn.2) function. If Fn.2 is toggled off, this setting is unconfigurable.

  • Fn.4: Temperature Display Unit

    Allows you to choose between Fahrenheit or Celsius for temperature readings. This requires the external temperature sensor cable to be connected.

    Diagram detailing the Temperature Display feature, showing the 2.5mm headset plug connector for the temperature cable and its application.

    Details on connecting and using the temperature sensor.

  • Fn.5: Voltage Offset (-0.5V to 0.5V)

    Manually calibrate the voltage readings to ensure accuracy.

  • Fn.6: Over-heating Cut-off (21°C-100°C / 70°F-176°F)

    Set a temperature value to activate an over-heating protection. Once the temperature reaches the set value, the system activates a protection mode by cutting off power to the USB ports. The LED will glow red and flash along with the temperature reading.

    Diagram explaining the Over-heating Cut-off feature, showing how the unit supplies power to a dash cam, measures its temperature, and cuts power if the set temperature is exceeded.

    How the Over-heating Cut-off feature protects connected devices.

Maintenance

  • Keep the charger dry and away from moisture.
  • Clean the surface with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
  • Ensure the DC outlet and charger contacts are free from dust and debris for optimal connection.
  • Avoid exposing the unit to extreme temperatures or direct sunlight for prolonged periods.

Troubleshooting

  • No Power/Display:
    • Ensure the charger is fully inserted into the car's DC outlet.
    • Check if the car's DC outlet is functioning (e.g., by testing with another device).
    • Verify the car's ignition is on, if required by your vehicle's DC outlet.
  • Slow Charging:
    • Ensure you are using the Fast Charging Port (Port 1) for compatible devices.
    • Check if your charging cable supports fast charging.
    • Some devices may limit charging speed if they are not compatible with the charger's fast charging protocols.
  • Incorrect Readings (Voltage/Temperature):
    • For voltage, use Fn.5 (Voltage Offset) to calibrate if you suspect inaccuracies.
    • For temperature, ensure the external sensor cable is securely connected and positioned correctly.
  • Over-current Protection (HGH Flashing):
    • If "HGH" flashes, it indicates an over-current condition (current ≥5A). Disconnect devices and check for faulty cables or devices drawing excessive power.
  • Over-heating Cut-off Activated (Red LED Flashing):
    • If the LED glows red and flashes with the temperature reading, the unit has reached its set over-heating cut-off temperature. Reduce the load or allow the unit to cool down.

Specifications

FeatureSpecification
Input VoltageDC10V - 30V
Port 1 OutputDC 20W with Fast Charging (QC2.0/3.0, FCP, AFC, SFCP)
Port 2 OutputDC5V / 3.1A (Max.)
Over-current Protection≥5A (Text "HGH" Flashing)
Power On Delay Timer1-30 Seconds
Auto Power-off Delay Timer1-120 Minutes
Temperature Display Range-30 °C - 80°C (-22°F - 176°F)
Voltage Reading Offset-0.5V - 0.5V
Over-heating Cut-off Setting21°C - 80°C (70°F - 176°F)
Image showing detailed specifications of the RHUNDO RV-31 car charger.

Detailed technical specifications for the RV-31.

User Tips

  • Dash Cam Protection: Utilize the Power-on Delay (Fn.1) feature to protect your dash camera from potential voltage spikes that can occur during vehicle startup. Setting a delay of 5-10 seconds is often sufficient.
  • Battery Preservation: If your car's DC outlet remains powered when the engine is off, configure the Auto Power-off (Fn.2) function to prevent the charger from draining your car battery.
  • Accurate Temperature: For the most accurate temperature readings, ensure the external temperature sensor is placed in a location that reflects the ambient temperature you wish to monitor, away from direct heat sources or air vents.

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact the manufacturer directly. Keep your proof of purchase for any warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.