T&G TG192

Contents

T&G TG192 Portable Bluetooth Speaker

Instruction Manual

Introduction

The T&G TG192 is a versatile portable Bluetooth speaker designed for both indoor and outdoor use. It features powerful stereo sound, vibrant RGB LED lighting, and multiple playback options including Bluetooth, FM radio, TF card, USB disk, and AUX input. Its waterproof design ensures durability in various environments.

Package Contents

  • 1 x TG192 Speaker
  • 1 x User Manual
  • 1 x USB Charging Cable
  • 1 x AUX Cable
  • 1 x Straps

Controls and Ports

Familiarize yourself with the speaker's controls and ports for optimal use.

T&G TG192 Speaker Control Buttons and Ports Diagram

Diagram showing the speaker's control buttons and input ports.

  1. Power Switch: Press to turn the speaker On or Off.
  2. LED Light Control: Short press to cycle through LED flashing light options. Long press to turn off the LED lights.
  3. Mode Switch (M): Press to switch between input modes: USB Card, TF Card, Wireless (Bluetooth), Line-in (AUX), and FM Radio.
  4. Next Song / Volume Up: Short press for the next song. Long press to increase the volume.
  5. Play/Pause / Call Control: Press to play or pause audio. During a call, press to answer or end the call.
  6. Previous Song / Volume Down: Short press for the previous song. Long press to decrease the volume.
  7. Charging Port: Connect the USB charging cable here to charge the speaker.
  8. USB Port: Insert a USB disk for audio playback.
  9. TF Port: Insert a TF (Micro SD) card for audio playback.
  10. AUX Port: Connect an external audio device using the AUX cable.

Setup

Charging the Speaker

Before first use, fully charge the speaker. Connect the provided USB charging cable to the Charging Port (7) on the speaker and the other end to a USB power adapter (not included) or a computer's USB port. The LED indicator will show charging status (specific indicator behavior may vary, refer to visual cues on the device if available).

Powering On/Off

Press the Power Switch (1) to turn the speaker On. Press and hold the Power Switch (1) again to turn the speaker Off.

Operating Instructions

Bluetooth Pairing

  1. Turn on the speaker. It will automatically enter Bluetooth pairing mode, indicated by a flashing LED light.
  2. Enable Bluetooth on your mobile device (smartphone, tablet, etc.).
  3. Search for available Bluetooth devices and select "TG192" from the list.
  4. Once paired, the speaker will emit a confirmation sound, and the LED light will stop flashing.
  5. You can now play audio from your device through the speaker.

Mode Switching

Press the Mode Switch (M) (3) repeatedly to cycle through the available input modes: Bluetooth, FM Radio, TF Card, USB Disk, and AUX Line-in.

Audio Playback

  • Play/Pause: Press the Play/Pause button (5) to play or pause the current track.
  • Next/Previous Track: Short press the Next Song button (4) for the next track or the Previous Song button (6) for the previous track.
  • Volume Control: Long press the Next Song button (4) to increase volume. Long press the Previous Song button (6) to decrease volume.

Hands-free Calling

When connected via Bluetooth, if a call comes in, press the Play/Pause button (5) to answer the call. Press it again to end the call.

LED Light Control

Short press the LED Light Control button (2) to change the flashing pattern of the RGB LED lights. Long press this button to turn off the LED lights.

Product demonstration video showcasing the speaker's features, including the LED lights.

Maintenance

Waterproofing (IPX6)

The T&G TG192 speaker has an IPX6 waterproof rating, meaning it is protected against high-pressure water jets from any direction. It is suitable for outdoor use and can withstand splashes and rain. However, it should not be submerged in water.

General Care

  • Clean the speaker with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Store the speaker in a cool, dry place when not in use.
  • Avoid exposing the speaker to extreme temperatures or direct sunlight for prolonged periods.

Troubleshooting

  • Speaker does not turn on: Ensure the battery is charged. Connect the speaker to a power source using the USB charging cable.
  • Cannot pair via Bluetooth: Make sure the speaker is in Bluetooth pairing mode (flashing LED). Ensure your device's Bluetooth is enabled and within range. Try restarting both the speaker and your device.
  • No sound: Check the volume levels on both the speaker and your connected device. Ensure the correct input mode is selected.
  • Poor sound quality: Move the speaker closer to your Bluetooth device to reduce interference. Check for obstructions between the devices. Ensure audio files are not corrupted.
  • LED lights not working: Short press the LED Light Control button (2) to activate or change patterns. If they are off, long press the button to turn them back on.

Specifications

FeatureSpecification
Brand NameT&G
ModelTG192
CategorySpeakers
Speaker TypeSubwoofer
Number of Loudspeaker Enclosure2
Speakers52mm *2
PMPO20W
Input Power(W)<25 W
Output Voltage10 W
Sound Mode3D Surround Sound Mode, Immersive Sound Mode, Stereo Sound Mode, Standard Mode
Audio CrossoverFull-Range
CommunicationAUX, USB, Audio Line, Bluetooth
Bluetooth Version5.0
Waterproof LevelIPX6
BatteryYes
Battery Capacity2400MAH
Charging Time2-3 hours
Power SourceBattery
MaterialPlastic
Cabinet MaterialPlastic
LightRGB
Dimension194.4mm * 81mm * 82mm
Sensivity90
Channels2 (2.0)
Support Memory CardYes
Voice ControlNo
Support APPNo
Active Noise-CancellationPassive
Intelligent Personal AssistantNone
Inbox adaptorNo
CertificationCE, RoHS
T&G TG192 Speaker Dimensions Diagram

Diagram illustrating the dimensions of the T&G TG192 speaker.

Bluetooth 5.0 Chip on Circuit Board

Close-up of the Bluetooth 5.0 chip, highlighting advanced connectivity.

User Tips

  • The T&G TG192 is noted for its good sound quality, making it suitable for various audio needs.
  • Utilize the included strap for easy portability, especially for outdoor activities.
  • Experiment with the different sound modes (3D Surround, Immersive, Stereo, Standard) to find your preferred audio experience.

Warranty and Support

For any issues or inquiries regarding your T&G TG192 speaker, please contact the seller or manufacturer's customer support. Keep your purchase receipt for warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.