1. Product Overview
The Goldstrike LED Filler Panel Lights are designed to enhance the visibility and aesthetics of your Honda Goldwing motorcycle. These lights integrate seamlessly into the rear filler panels, providing super bright LED illumination for running, braking, and turn signal functions.
Key Features:
- Easy plug-n-play installation with no drilling required.
- Utilizes super bright LEDs for maximum visibility.
- Functions as running lights, brake lights (red), and plasma amber turn signals.
- Light-pipe technology and advanced optics ensure visibility from sharp side angles.
- Designed to allow for convenient rear fender removal for motorcycle service.
- Available in chrome or black finishes.
Compatibility:
- 2018-up Honda Gold Wing
- 2018-up Honda Gold Wing DCT
- 2018-up Honda Gold Wing Tour
- 2018-up Honda Gold Wing Tour DCT
- 2018-up Honda Gold Wing Tour DCT Airbag
The image below shows the Goldstrike LED Filler Panel Lights installed on a Honda Goldwing.
2. Specifications
| Attribute | Value |
|---|---|
| Wattage | 12-32V |
| Battery Included | No |
| High-concerned chemical | None |
| Condition | 100% Brand New |
| Origin | Mainland China |
| Available Colors | Black, Chrome |
| Quantity | A pair (2 units) |
| Package Length | 10 cm |
| Package Width | 10 cm |
| Package Height | 10 cm |
| Package Weight | 0.6 kg |
Below are examples of the product in different finishes and with wiring.
3. Setup and Installation
The Goldstrike LED Filler Panel Lights are designed for a straightforward plug-n-play installation without the need for drilling. Ensure your motorcycle is turned off and cooled down before beginning installation.
Installation Steps:
- Locate Installation Points: Identify the rear filler panel areas on your Honda Goldwing where the lights will be installed.
- Access Wiring: Carefully access the motorcycle's existing wiring harness. The turn signal function requires connection to the Plug-n-Play 48000 Harness (if not already present, this harness may need to be acquired separately for full functionality).
- Connect Lights: Connect the wiring from the LED Filler Panel Lights to the corresponding points on your motorcycle's harness. Ensure all connections are secure. Refer to Figure 4 for visual guidance on connection points.
- Secure Lights: Mount the LED Filler Panel Lights into their designated positions. Ensure they are firmly seated and aligned.
- Test Functionality: Before fully reassembling, turn on your motorcycle and test all light functions: running lights, brake lights, and turn signals.
- Final Assembly: Once all functions are verified, carefully reassemble any removed panels or components.
4. Operating Instructions
Once installed, the Goldstrike LED Filler Panel Lights operate in conjunction with your motorcycle's existing lighting system.
Light Functions:
- Running Lights: When your motorcycle's ignition is on and headlights are activated, the LED filler panel lights will illuminate in red, providing enhanced rear visibility.
- Brake Lights: Upon application of the brakes, the red illumination of the filler panel lights will intensify, signaling braking action to following traffic.
- Turn Signals: When the turn signal is activated, the corresponding filler panel light will flash in plasma amber, indicating your intended direction. This function requires connection to the Plug-n-Play 48000 Harness.
Observe the different light modes in the demonstration video below.
An image illustrating the different light functions (red for run/brake, amber for turn) is provided below.
5. Maintenance
To ensure the longevity and optimal performance of your Goldstrike LED Filler Panel Lights, follow these simple maintenance guidelines:
- Cleaning: Clean the light lenses regularly with a soft cloth and mild soap and water. Avoid abrasive cleaners or solvents that could damage the plastic.
- Inspection: Periodically check the wiring connections to ensure they remain secure and free from corrosion. Inspect the lights for any physical damage.
- LED Lifespan: LEDs have a long lifespan and generally do not require replacement under normal operating conditions. If an LED fails, the entire unit may need to be replaced.
6. Troubleshooting
If you experience issues with your LED Filler Panel Lights, consider the following troubleshooting steps:
- Lights Not Illuminating:
- Check all wiring connections for looseness or disconnections.
- Verify that the motorcycle's power system is functioning correctly (e.g., battery charge, fuses).
- Ensure the lights are correctly connected to the motorcycle's harness as per the installation instructions.
- Incorrect Function (e.g., no turn signal):
- Confirm that the Plug-n-Play 48000 Harness is correctly installed and connected for turn signal functionality.
- Check for any damaged wires or connectors.
- Flickering Lights:
- Inspect connections for intermittent contact.
- Ensure the voltage supply is stable and within the 12-32V range.
If problems persist after attempting these steps, it is recommended to consult with a qualified motorcycle technician.
7. User Tips
While no specific user tips were available from reviews or Q&A, general advice for motorcycle lighting products includes:
- Regular Checks: Periodically check all lighting functions (run, brake, turn) before each ride to ensure they are working correctly.
- Visibility: Even with enhanced lighting, always use appropriate hand signals and maintain safe riding practices.
- Professional Installation: If you are uncomfortable with electrical work, consider having the lights installed by a professional motorcycle mechanic.
8. Warranty and Support
For information regarding product warranty, returns, or technical support, please refer to the seller's policies or contact the seller directly. General support information may include:
- Returns: Free returns may be available within a specified period (e.g., 90 days).
- Delivery Guarantee: Compensation (e.g., coupon code) may be offered if delivery is delayed, or a refund if the package is lost or items are damaged during transit.
Always retain your proof of purchase for any warranty or support claims.
