HUTT W66 Smart Window Cleaning Robot User Manual

1. Introduction

Thank you for choosing the HUTT W66 Smart Window Cleaning Robot. This intelligent device is designed to simplify window cleaning with its advanced features, including automatic water spray, intelligent route planning, high suction power, and comprehensive safety mechanisms. Please read this manual thoroughly before operating the robot to ensure safe and efficient use.

2. Important Safety Instructions

To reduce the risk of fire, electric shock, or injury, always follow basic safety precautions when using electrical appliances, including the following:

• Read all instructions before using the appliance.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Use only the power adapter supplied with the appliance.
• Ensure the power cable and safety rope are securely attached before each operation.
• Do not use the robot on cracked, damaged, or uneven glass surfaces.
• Keep hands, hair, loose clothing, and all parts of the body away from openings and moving parts.
• Do not operate the robot in areas where flammable or combustible liquids or gases are present.
• Do not use the robot to pick up large objects, sharp objects, or anything that is burning or smoking.
• Only use recommended cleaning solutions. Do not use corrosive liquids.
• In case of a power outage, the built-in UPS battery provides approximately 20 minutes of backup power. Remove the robot from the window promptly during this period.
• Store the robot in a cool, dry place when not in use.

3. Package Contents

Please check the package contents upon unboxing:

Figure 3.1: Package Contents Diagram

• HUTT W66 Window Cleaning Robot
• Cleaning Pads (4 pieces)
• Remote Control
• Batteries for Remote Control
• Power Adapter
• Extension Cord
• Spray Bottle
• Safety Rope
• User Manual
• Storage Box

4. Product Overview

Familiarize yourself with the components and features of your HUTT W66 robot.

Figure 4.1: Front View of HUTT W66 Robot

Figure 4.2: Top View with Water Tank

Figure 4.3: Exploded View of Internal Components (1: CPU, 2: Battery, 3: Pressure Sensor, 4: Gyro Chip, 5: Brushless DC Motor, 6: Water Level Sensor, 7: Microfiber Wipes)

Figure 4.4: Water Spray System with 8 Spray Points

Figure 4.5: High-Precision Laser Sensor

5. Setup Guide

1. Attach Cleaning Cloths

   Securely attach a clean microfiber cleaning cloth to the bottom of the robot. Ensure it covers the cleaning area evenly.

2. Fill Water Tank

   Open the water tank cap (refer to Figure 4.2) and fill the 150ml intelligent control water tank with distilled water or a non-corrosive window cleaning solution using the provided spray bottle. Close the cap tightly.

   

   Figure 5.1: Filling the Water Tank

3. Connect Power

   Connect the power adapter to the robot and then plug it into a power outlet. Ensure the connection is firm. The robot requires continuous power during operation.

4. Attach Safety Rope

   Attach the safety rope to a sturdy fixture indoors, such as a heavy piece of furniture or a window frame. Secure the other end of the rope to the designated attachment point on the robot. This is crucial for preventing falls, especially when cleaning high or outdoor windows.

5. Place Robot on Window

   Place the robot on the window surface, ensuring it is flat against the glass. The robot will automatically adhere to the surface using its suction.

6. Operating Instructions

6.1 Starting Operation

1. After placing the robot on the window and ensuring power and safety rope are connected, press the power button on the robot or the remote control to start.
2. The robot will perform a self-check and then begin cleaning according to its intelligent route planning.
3. The HUTTTHINK smart algorithm will automatically adjust suction power based on glass cleanliness and surface conditions, ranging from 2600PA to 3400PA.
4. The robot will automatically spray water from its 8 metal pressurized spray points every 10 seconds for even coverage, ensuring the cleaning cloth remains moist.
5. The laser detection sensor allows the robot to accurately identify glass edges and obstacles, slowing down and repeatedly cleaning edges before changing direction.
6. Once cleaning is complete, the robot will automatically return to its starting position.

Figure 6.1: Intelligent Route Planning

Figure 6.2: HUTTTHINK Smart Algorithm for Suction Adjustment

6.2 Using the Remote Control

The remote control allows you to manually direct the robot, pause/resume cleaning, and initiate water spray. Refer to the remote control diagram in the package contents for button functions.

6.3 Product Demonstration Video

This video demonstrates the key features and operation of the HUTT W66 robot, including water tank filling, suction, path planning, and laser sensor functionality.

7. Maintenance

7.1 Cleaning Microfiber Cloths

After each use, remove the microfiber cleaning cloths from the robot. They can be hand-washed or machine-washed with mild detergent. Allow them to air dry completely before reuse or storage.

7.2 Cleaning Water Tank and Spray Nozzles

Periodically empty any remaining water from the tank. If using tap water, clean the tank and spray nozzles regularly to prevent mineral buildup. You can use a soft brush or a cotton swab to gently clean the spray nozzles if they appear clogged.

7.3 Cleaning Sensors and Tracks

Wipe the laser sensors and the non-slip tracks on the bottom of the robot with a clean, dry cloth to ensure optimal performance and adhesion.

Figure 7.1: Non-Slip Special Track

7.4 Storage

When not in use, store the robot and its accessories in the provided storage box in a cool, dry place, away from direct sunlight and extreme temperatures.

Figure 7.2: Robot Stored in Box

8. Troubleshooting

9. Specifications

Figure 9.1: Product Dimensions

10. User Tips

• For heavily soiled windows, consider a quick manual wipe to remove loose dirt before using the robot for optimal streak-free results.
• Using distilled water or a high-quality, non-foaming window cleaning solution can help prevent streaks and extend the life of the spray nozzles.
• Always ensure the microfiber pads are clean and dry before starting a new cleaning cycle.
• When cleaning multiple windows, it's efficient to clean all interior windows first, then move to exterior windows, ensuring the safety rope is always re-secured.

11. Warranty and Support

11.1 Warranty Information

This product comes with a two-year official warranty. In case of any manufacturing defects or malfunctions, please contact the seller or an authorized service center. The warranty does not cover damage caused by human factors or external forces.

11.2 Customer Support

For any questions, technical assistance, or service inquiries, please contact the seller directly. Provide your product model and purchase details for faster service.