1. Introduction
Thank you for purchasing the RIDEN RD6006P/RD6006PW Digital DC Power Supply. This manual provides detailed instructions to help you understand the full functionality of the product, ensure proper usage, and avoid misuse. Please read it carefully before operation and keep it for future reference.
Note: This instruction corresponds to firmware versions RD6006P(V1.45) and RD6006PW(V1.45). Page layouts and operations may vary slightly with different firmware versions. We recommend downloading the latest firmware for the best experience.

Figure 1: Front view of the RD6006P/RD6006PW Digital DC Power Supply
2. Package Contents
The product is packaged in a square carton with a plastic sealing film. Upon opening, an instruction card with a QR code for digital instructions will be found. The accessories included are:
- RD Power Supply Unit (x1)
- Backup Fuse (x1)
- External Temperature Sensor (10K B3950) (x1)
- WiFi/RS485 Communication Board (optional, if ordered separately)

Figure 2: RD6006P Packaging and Included Accessories
3. Specifications
The following table details the technical parameters of the RD6006P/RD6006PW models:
| Parameter | Value |
|---|---|
| Model | RD6006P/RD6006P-W |
| Input Voltage Range | 7-70.00V |
| Output Voltage Range | 0-60.000V |
| Output Current Range | 0-6.0000A |
| Output Power Range | 0-360W |
| Input Voltage Measurement Resolution | 0.01V |
| Output Voltage Setting Measurement Resolution | 0.001V |
| Output Current Setting Measurement Resolution | 0.0001A |
| Battery Voltage Measurement Resolution | 0.01V |
| Input Voltage Measurement Accuracy | ±(1%+5 digits) |
| Output Voltage Accuracy (setting and measurement) | ±(0.5‰+4 digits) |
| Output Current Accuracy (setting and measurement) | ±(1‰+6 digits) |
| Battery Voltage Measurement Accuracy | ±(0.5‰+3 digits) |
| Automatic Cut-off Current Value (charging) | Set by yourself |
| Output Ripple Typical | 20mV VPP |
| Working Temperature Range | -10℃~40℃ |
| External Sensor Temperature Detection Range | -10℃~100℃ / 0℉~200℉ |
| External Sensor Temperature Detection Accuracy | ±3℃/±6℉ |
| Constant Voltage Mode Response Time | 2ms (0.1A-5A Load) |
| Constant Voltage Mode Load Regulation | ±(0.1%+2 digits) |
| Constant Current Mode Load Regulation | ±(0.1%+3 digits) |
| Capacity Measurement Range | 0-9999.99Ah |
| Energy Measurement Range | 0-9999.99Wh |
| Capacity and Energy Statistical Error | ±2% |
| Buck Working Mode | (input voltage÷1.1)-2 |
| Over Temperature Protection | System temperature >80℃ |
| Screen Brightness Setting | 0-5 (6 levels in total) |
| Screen | 2.4 inch color HD display |
| Weight (with package) | About 0.62kg |
| Product Dimension | 167*81*65mm |
| Cooling Fan Start Condition | Output current >4A or System temperature >45℃ |
| Cooling Fan Shut Down Condition | Output current <3.9A and System temperature <45℃ |
| USB Communication | Supported |
| WiFi Communication | Only W version has WiFi |

Figure 3: Product Dimensions
4. Setup and Installation
4.1 Physical Installation
The RD6006P/RD6006PW is designed for easy integration. Ensure proper installation to prevent damage and ensure safety.

Figure 4: Correct and Incorrect Installation Methods
4.2 Power Supply Unit (PSU) Connection
The device requires a DC input. If you are not using a complete set, you will need a switching power supply for AC input. This PSU must be reliably grounded to prevent leakage.
Warning: If the input voltage exceeds 72V, the output will automatically turn off, and an alarm will be displayed. Exceeding this voltage can permanently damage the product.

Figure 5: PSU Recommendations and Warnings
Recommended PSUs:
- Custom PSUs or reputable brand PSUs (e.g., 400W 65V, 1000W 68V).
Not Recommended PSUs:
- AC-DC converters or transformers without proper rectification and filtering.
- PSUs with unstable output voltage (e.g., electric bike chargers, second-hand power supplies, modified power supplies). These can cause high output voltages and damage the device.
Important: If you order a PSU separately, check its stable output voltage with a multimeter before connecting it to the RD power supply. Abnormal output can cause damage.
4.3 Communication Module Installation
The external temperature sensor cable should be plugged into the 'S' external temperature sensor interface. For models with WiFi communication, the WiFi communication board plugs into the 'U' communication module interface.

Figure 6: Internal Components and Interfaces (RD6006P)
Warning: Do not install or remove the Wi-Fi module when the device is powered on, as this may cause damage.
4.4 Fuse Replacement
The device includes a backup fuse. If the fuse is blown due to incorrect operation, you can replace it. The fuse holder is rated for a maximum of 10A. For long-term use, solder the fuse directly to the product.
- RD6006P/RD6006PW: 10A fuse
5. Operating Instructions
5.1 Panel Overview
The front panel features a keypad, encoder potentiometer, and various buttons for control and display. The back panel provides connection interfaces.

Figure 7: Internal View of RD6006P
Front Panel Controls:
- A: Power button
- B: SHIFT Button (for second functions)
- C: Quick storage button
- D: Current/Over current protection setting
- E: Voltage/Over voltage protection setting
- F: Micro USB port
- G: Power supply output negative terminal / Battery charging negative terminal
- H: Battery charging positive terminal (dedicated for battery charging)
- I: Power supply output positive terminal (connect 4mm banana plug)
- J: Output ON/OFF switch
- K: Enter/Confirm button
- L: Encoder potentiometer (rotate for adjustment, press for cancel)
- M: Direction button
- N: Keypad
- O: Screen
Back Panel Interfaces (RD6006P/RD6006P-W):
- P: Input fuse (Type: 1808)
- Q: Output fuse
- R: Power source input interface (HT508K/K14)
- S: External temperature sensor interface (XH2.54-2P)
- T: CR1220 battery socket
- U: Communication module interface (WiFi or RS485 board)
- V: Fan interface (cannot add or replace other fan)
- W: Remote sampling switch (only for RD6006P)
- X: Remote sampling terminal (only for RD6006P)

Figure 8: 2.4-Inch HD Large Screen Display
5.2 Basic Operation
After power-on, the device will display a boot image before entering the main page.
5.2.1 Main Page Display
The main page displays actual output voltage, current, power, input voltage, and other parameters. You can switch between Classic, Detailed, and Curve display styles by pressing the ENTER button. In curve style mode, rotate the encoder potentiometer to scale the vertical coordinate of the curve. Press ENTER to pause/start curve recording.

Figure 9: Display Style Options
5.2.2 Setting Output Voltage and Current
Press I-SET to set the output current value (AK). Use the encoder potentiometer to adjust the value directly or the keypad (N) to type in the value. Press ENTER to confirm.
Press V-SET to set the output voltage value (AL). Operation is similar to current setting.
5.2.3 Data Group Quick Storage and Call Out
The device supports storing and recalling up to 10 data groups (M1-M9, M0 is default).
- Store: Press MEM + keypad button (1-9) to store current settings. Press ENTER to confirm.
- Recall: Press SHIFT + keypad button (1-9) to quickly call out saved data. Press ENTER to confirm.

Figure 10: Data Storage and Recall
5.2.4 Keypad Lock and Unlock
Press SHIFT + LOCK to lock or unlock the keypad. The keypad will automatically lock when communication starts and unlock after 3 seconds if communication is disconnected.
5.2.5 System Settings
Press SHIFT + 0 to enter the system setting menu. Use the direction buttons (M) to navigate and the encoder potentiometer to change settings. Press ENTER to confirm.
- Language: Set to English, Simplified Chinese, French, German, or Russian.
- Boot Logo: ON (default) displays the logo on boot, OFF skips it.
- Buzzer: ON (default) enables button press sound, OFF disables it.
- Backlight: Levels 0-5 (default 4).
- Update Rate: Low/Mid/High for display refresh rate.
- Max Power: Set between 0-740W (default 740W).
- Temperature Unit: Switch between ℃ and ℉.

Figure 11: System Settings Interface
5.2.6 Battery Charging Function
Connect the green terminal (H) to the battery's positive electrode and the black terminal (G) to the negative electrode. The battery charging indicator (AG) will turn red when connected and green when charging. Press ON/OFF to start charging.
Charging automatically cuts off if the actual output current is lower than the set cut-off current (default 10mA) or if the external temperature sensor detects a temperature above the set cut-off temperature (default 60℃).
Warning: Only use original chargers for batteries. The charging function of this device is for temporary use. Understand battery parameters well to avoid fire or explosion risks.
5.2.7 Multiple Protection Features
The device includes Over Voltage Protection (OVP), Over Current Protection (OCP), and Over Temperature Protection (OTP).
- OVP: Output automatically shuts down if output voltage exceeds the set OVP value.
- OCP: Output automatically shuts down if output current exceeds the set OCP value.
- OTP: Output automatically shuts down if system temperature exceeds 80℃.

Figure 12: Multiple Protection Features
6. Software Control
6.1 PC Software
The PC software provides comprehensive functions for monitoring and controlling the power supply. It supports Windows 7 and above.

Figure 13: PC Software Interface
6.1.1 Software Download and Installation
Download the PC software from the official Google Drive link: RIDEN RD6006P/RD6006PW Software. Install the .Net Framework 4.7.2 if not already present. Install the CH341SER driver for USB communication.
6.1.2 Connection
Connect the RD6006P/RD6006PW to your PC via a Micro USB cable. For WiFi models (RD6006PW), ensure the communication interface is set to WiFi on the device. In the PC software, select the correct COM port, baud rate, and slave address, then click "Connect".
6.1.3 Firmware Upgrade
To upgrade firmware, connect the device to the PC via USB. Enter boot mode by holding the ENTER button while powering on. In the PC software, navigate to "Firmware Update" and follow the on-screen instructions. The process takes approximately 100 seconds.
Video: Product overview and feature demonstration.
6.2 Mobile App Control (RD6006PW only)
The RD6006PW model supports mobile app control via WiFi for both Android and iOS devices.

Figure 14: Mobile App Control Interface
6.2.1 App Download and Installation
- Android: Download the APP zip-file from the official Google Drive link: Android App Download. Alternatively, search "RdPower" or "RuiDeng" on Google Play (supports Android 8.0+).
- iOS: Search "RdPower" on the Apple App Store (supports iOS 10.0+).
Note: The app may have compatibility issues with certain phone models or OS versions (e.g., Harmony OS). Test the app before purchasing if this is a critical feature for you. The Wi-Fi communication only supports 2.4G signals; 5G is not supported.
6.2.2 Network Distribution (WiFi Connection)
For first-time WiFi connection, insert the WiFi board, power on the RD6006PW, and set the communication interface to WiFi. Place the device and your mobile phone close to a 2.4G router. Ensure your phone is on the same 2.4G network and the router's AP isolation and WMM functions are disabled. Follow the app's instructions for network distribution.
7. Troubleshooting
7.1 General Issues
- Product differs from picture: The manufacturer continuously updates hardware and software. Minor internal material differences do not affect functionality.
- No instruction manual included: Due to continuous updates, the latest manual is available online.
- Fuse blown: Replace with the provided backup fuse (10A for RD6006P/PW). For long-term use, solder the fuse directly.
- Inductive load operation: If connecting an inductive load (e.g., motor), the maximum working current should not exceed 1/3 of the device's range.
7.2 Software/App Issues
- App crashes/PC software incompatibility: Software compatibility issues may occur with certain operating systems or phone models. It is recommended to download and test the software/app before purchase if these features are critical.
- Cannot connect RD6006PW to phone app via WiFi:
- Ensure the WiFi board is properly inserted.
- Verify your WiFi network is 2.4GHz (5GHz is not supported).
- Disable client isolation/AP isolation and WMM functions on your router.
- Ensure location and storage services are enabled for the app during installation.
- If using a Huawei phone, turn off the random MAC address function.
- If problems persist, try connecting via a mobile phone hotspot for testing.
- Cannot connect RD6006PW to PC via WiFi but can connect to phone: WiFi connection to PC is a test function with potential compatibility issues. If it doesn't work, use USB communication instead.
8. User Tips
- Always ensure your input power supply is stable and within the specified voltage range (7-70V DC) to prevent damage.
- For battery charging, use the dedicated battery charging terminals (H and G) and set appropriate cut-off current and temperature limits.
- Regularly check for firmware updates to access new features and improvements.
- Familiarize yourself with the keypad shortcuts and data storage functions to quickly recall frequently used settings.
- When using PC software, ensure the correct COM port and baud rate are selected for stable communication.
9. Support and Contact
For further assistance, technical support, or to report issues, please use the following contact information:
- Email: 1749808860@qq.com
- WhatsApp: +8615868147353
- QQ Group: 550112838
- WeChat: 15868147353

Figure 15: RIDEN Contact Information
You can also refer to the official website or product page for the latest documentation and support resources.