1. Introduction
The Dongcheng DCZC04-24 20V 4.0hx Cordless Rotary Hammer is a powerful and versatile tool designed for professional applications in construction, renovations, and general installations. This tool features an SDS-Plus quick-change accessory system for efficient bit changes and an integrated LED light to illuminate work areas, enhancing visibility and precision. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your rotary hammer.
2. Package Contents
Carefully unpack your Dongcheng DCZC04-24 Cordless Rotary Hammer and verify that all items listed below are present and in good condition. If any items are missing or damaged, please contact your retailer.
- 1 x Dongcheng DCZC04-24 Cordless Rotary Hammer
- 1 x Instruction Manual
- 1 x Battery Charger
- 2 x 20V 4.0Ah Batteries
- 1 x Auxiliary Handle
- 1 x Depth Gauge
- 1 x Carrying Case

3. Features
The DCZC04-24 Rotary Hammer is equipped with several features to enhance performance and user safety:
- Variable Speed Control: Allows for precise control over drilling and hammering applications.
- Safety Clutch: Provides increased user protection by disengaging the drive in case of bit jamming or overload.
- SDS-Plus Chuck System: Enables quick and tool-free bit changes.
- Integrated LED Light: Illuminates the work area for improved visibility in low-light conditions.
- Brushless Motor: Offers increased efficiency, longer runtime, and extended tool life.
- 20V Battery System: Fully compatible with other Dongcheng 20V batteries and chargers.
4. Setup
Before operating the rotary hammer, ensure proper assembly and battery charging.
4.1 Charging the Battery
- Connect the charger to a suitable power outlet.
- Slide the 20V battery into the charger until it clicks into place.
- Allow the battery to charge fully. The charger's indicator lights will show the charging status.
- Once charged, remove the battery from the charger.
4.2 Installing the Battery
- Align the charged battery with the battery slot on the base of the rotary hammer.
- Slide the battery into the tool until it clicks securely into place. Ensure it is firmly seated to prevent accidental disconnection during operation.
4.3 Attaching the Auxiliary Handle and Depth Gauge
- Loosen the auxiliary handle by twisting it counter-clockwise.
- Slide the handle over the front of the tool body to the desired position.
- Insert the depth gauge into the hole on the auxiliary handle.
- Adjust the depth gauge to the required drilling depth.
- Tighten the auxiliary handle by twisting it clockwise until it is secure.

4.4 Installing SDS-Plus Bits
- Clean the shank of the SDS-Plus bit.
- Pull back the chuck collar on the rotary hammer.
- Insert the bit into the chuck until it stops.
- Release the chuck collar. The bit should be held securely but have a slight axial play, which is normal for SDS-Plus systems.
- To remove, pull back the chuck collar and pull the bit out.
5. Operating Instructions
Always wear appropriate personal protective equipment (PPE) such as safety glasses, hearing protection, and gloves when operating the tool.
5.1 Powering On/Off
- To turn on the tool, press the trigger switch.
- To turn off the tool, release the trigger switch.
5.2 Variable Speed Control
The trigger switch provides variable speed control. Pressing the trigger further increases the speed and impact frequency. This allows for greater control depending on the material and application.
5.3 Mode Selection
The rotary hammer typically features multiple operating modes. Refer to the mode selector switch on the tool (usually a rotating dial) to choose between:
- Drilling Mode: For drilling into wood, metal, and plastics without hammering action.
- Hammer Drilling Mode: For drilling into concrete, masonry, and stone with both rotation and hammering action.
- Chiseling Mode (if applicable): For light chiseling work, such as removing tiles or breaking small sections of concrete.
Always ensure the tool is switched off before changing modes.
5.4 Using the LED Light
The integrated LED light automatically activates when the trigger is pressed, illuminating the work surface for better visibility in dark or confined spaces.
5.5 Safety Clutch
In the event that the drill bit jams in the workpiece, the safety clutch will activate, disengaging the drive to protect the user from sudden rotational forces and prevent damage to the tool. Release the trigger immediately if the clutch activates.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your rotary hammer.
6.1 General Cleaning
- Always disconnect the battery before performing any cleaning or maintenance.
- Keep the ventilation openings of the tool clean to prevent overheating.
- Wipe the tool housing with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Clean the SDS-Plus chuck regularly to ensure smooth bit changes and prevent dust buildup.
6.2 Battery Care
- Store batteries in a cool, dry place away from direct sunlight and extreme temperatures.
- Do not store fully discharged batteries for extended periods. Charge them periodically if not in use.
- Avoid dropping or physically damaging batteries.
6.3 Storage
When not in use, store the rotary hammer, batteries, and charger in its original carrying case in a dry, secure location, out of reach of children.

7. Troubleshooting
If you encounter issues with your rotary hammer, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Tool does not start | Battery not charged or improperly installed | Ensure battery is fully charged and securely inserted. |
| Reduced power or performance | Low battery charge; Worn or dull bit | Recharge battery; Replace with a sharp, appropriate bit. |
| Bit jams frequently | Incorrect bit for material; Excessive pressure; Overload | Use correct bit; Apply steady, moderate pressure; Reduce load. |
| Excessive vibration or noise | Loose bit; Damaged bit; Internal issue | Check bit for security and damage; If problem persists, seek professional service. |
If the problem persists after attempting these solutions, please contact customer support.
8. Specifications
Technical specifications for the Dongcheng DCZC04-24 Cordless Rotary Hammer:
| Specification | Value |
|---|---|
| Battery Voltage | 20V |
| Battery Capacity | 4.0Ah (x2 included) |
| Tool Weight (without battery) | 3.2 kg |
| Impact Energy | 2.7 J |
| No-Load Speed | 0-1000 r/min |
| Impact Frequency | 0-4500 /min |
| Max. Drilling Capacity (Concrete) | 24 mm |
| Max. Drilling Capacity (Steel) | 13 mm |
| Max. Drilling Capacity (Wood) | 28 mm |
9. User Tips
- For optimal performance and battery life, always use genuine Dongcheng 20V batteries and chargers.
- When drilling into hard materials like concrete, start with a lower speed and gradually increase as needed.
- Periodically check the SDS-Plus chuck for debris and lubricate lightly if necessary to ensure smooth bit insertion and removal.
- Always secure your workpiece before drilling to prevent movement and ensure safety.
- Utilize the depth gauge to achieve consistent drilling depths, especially for repetitive tasks.
10. Warranty and Support
For warranty information, service, or technical support, please refer to the warranty card included with your product or contact your authorized Dongcheng dealer or the seller directly. Keep your purchase receipt as proof of purchase.