Yeelight YLKG Series Smart Wall Switch

Contents

Yeelight Smart Wall Switch Instruction Manual

Model: YLKG Series Smart Wall Switch

1. Introduction

The Yeelight Smart Wall Switch offers convenient control over your lighting, designed for both smart and traditional lamps. It features a self-rebound mechanism and dual control functionality, allowing you to manage your lights from anywhere without complex wiring. This manual provides detailed instructions for installation, operation, and maintenance of your Yeelight Smart Wall Switch.

Yeelight Smart Switch overview showing single, double, and triple button versions and key features.
Figure 1: Yeelight Smart Wall Switch overview, highlighting its control capabilities and various button configurations.

2. Important Safety Information

Please read and follow these safety precautions carefully to prevent injury or damage to the product:

  • Always cut off the electricity supply at the main circuit breaker before attempting any installation or maintenance.
  • Professional installation is strongly suggested to ensure correct and safe wiring.
  • Use an insulated screwdriver during installation to prevent electrical shock.
  • Keep the switch away from humid environments to prevent damage and ensure safe operation.
  • The switch is designed for use under conditions where the voltage is lower than AC250V and current is lower than 16A. Do not exceed these ratings.

3. Product Overview

3.1 Key Features

  • Self-Rebound Design: Generates a specific current pulse to allow smart lamps to be controlled anytime, anywhere.
  • Dual Control Function: Supports controlling lights from multiple locations.
  • No Additional Wiring Required: Designed for direct replacement of traditional 86-type wall switches.
  • Durable Construction: Features an eco-friendly brass base and sterling silver contacts for better conductivity and longer service life.
  • Precision Mechanical Design: Tested for 40,000 opening and closing cycles for extended durability.
  • High-Quality PC Material: Overall fire retardant for enhanced safety.

3.2 Available Versions

The Yeelight Smart Wall Switch is available in three versions to suit various lighting control needs:

  • Single Button: Controls one group of lights.
  • Double Button: Independently controls two groups of lights.
  • Triple Button: Independently controls three groups of lights.
Image showing the single, double, and triple button versions of the Yeelight Smart Wall Switch.
Figure 2: Different versions of the Yeelight Smart Wall Switch.

4. Specifications

AttributeValue
VersionsSingle button, Double button, Triple button
MaterialABS (fire retardant PC material)
ColorWhite
Rated VoltageAC250V
Rated Current16A
Work ModesSmart Mode & Traditional Mode
Hole Spacing60mm
Working Temperature-10℃ to 40℃
Working Humidity0% - 85% RH
Item Weight85g (approx. 3.0 oz)
Item Dimensions (L x W x H)86 x 86 x 32 mm (3.39 x 3.39 x 1.26 inches)
Power SourceAC
Battery IncludedNo
Wireless CommunicationYes (Communication method: Other)
State of AssemblyReady-to-Go
CertificationCE
UsageControl ceiling light

5. Installation and Setup

5.1 Wiring Instructions

The Yeelight Smart Wall Switch is designed for direct replacement of traditional 86-type wall switches, requiring no additional wiring for basic functionality. Ensure the power is off before proceeding.

Back of the Yeelight Smart Wall Switch showing wiring terminals for L and L1 connections.
Figure 3: Rear view of the switch with wiring terminals. Connect live (L) and load (L1) wires as indicated.

Installation Steps:

  1. Turn off Power: Locate your circuit breaker and turn off the power to the light switch you intend to replace. Verify power is off using a voltage tester.
  2. Remove Old Switch: Carefully remove the existing wall plate and unscrew the old switch from the wall box. Disconnect the wires, noting which wire was connected to which terminal.
  3. Connect New Switch: Connect the live wire (typically black or red) to the 'L' terminal on the Yeelight switch. Connect the load wire (going to the light fixture) to the 'L1' terminal. Ensure all connections are secure.
  4. Mount Switch: Gently push the wires back into the wall box and secure the Yeelight switch to the wall box using the provided screws.
  5. Install Wall Plate: Attach the new wall plate over the switch.
  6. Restore Power: Turn the power back on at the circuit breaker.

5.2 Compatible Yeelight Smart Devices

This smart switch is compatible with the following Yeelight smart lighting models:

  • YEELIGHT LED Smart Ceiling Light Pro YLXD08YL
  • YEELIGHT Smart LED Pendant Lamp YLDL01YL
  • YEELIGHT Smart Ceiling Light (Homekit Version) YLXD50YL
  • YEELIGHT Smart Ceiling Light (Homekit Version) YLXD41YL
  • YEELIGHT Jiaoyue 480 (Homekit Version) YLXD42YL
  • YEELIGHT Xianyu Smart Ceiling Light
  • YEELIGHT Aurora Smart Ceiling Light
  • YEELIGHT Smart Panel Light
  • YEELIGHT 5m LED Smart Light Strip YLDD03YL
  • YEELIGHT 1s Smart Bulb YLDP13YL
  • YEELIGHT Smart Filament Bulb YLDP12YL
  • YEELIGHT LED Mesh Bulb/Downlight/Spotlight/ Candle Lamp

6. Operating Modes

The Yeelight Smart Wall Switch offers two distinct operating modes: Smart Mode (also referred to as Atom Mode) and Traditional Mode, allowing compatibility with both smart and conventional lighting fixtures.

6.1 Smart Mode (Atom Mode)

In Smart Mode, the switch utilizes a self-rebound mechanism. When pressed, it generates a specific current pulse. A compatible smart lamp detects this pulse and executes a specific algorithm, allowing the lamp to remain powered on for an extended period. This enables the smart lamp to be controlled wirelessly via an app or other smart home devices, even when the physical switch is "off".

Diagram illustrating the self-rebound design of the Yeelight switch and how it sends a current pulse to a smart lamp.
Figure 4: Self-rebound design and smart lamp control mechanism.

Activating Smart Mode:

To set the switch to Smart Mode (Agile Mode), turn the screw on the back of the switch counter-clockwise until it pops up. This allows the switch to return to its neutral position after being pressed.

Diagram showing how to turn the screw on the back of the switch to activate Atom Mode.
Figure 5: Adjusting the screw for Atom Mode (Smart Mode).

6.2 Traditional Mode

In Traditional Mode, the switch functions as a standard rocker switch, directly controlling the power supply to the connected lamp. This mode is suitable for controlling traditional, non-smart lighting fixtures.

Activating Traditional Mode:

To set the switch to Traditional Mode, press the screw on the back of the switch inwards and tighten it clockwise. This will transform it into a normal rocker switch that stays in the 'on' or 'off' position.

Diagram showing how to tighten the screw on the back of the switch to activate Traditional Mode.
Figure 6: Adjusting the screw for Traditional Mode.

6.3 External Power Switch

When operating in Atom Mode, you can gently move the external power switch to completely power off the device. This is a convenient and quick way to cut power without needing to switch back to Traditional Mode.

Close-up of the external power switch on the side of the Yeelight Smart Wall Switch.
Figure 7: Location of the external power switch.

7. User Tips

  • For optimal smart home integration, ensure your Yeelight smart lamps are updated to the latest firmware.
  • If using the switch with smart bulbs, keep the switch in Smart Mode (Atom Mode) to maintain continuous power to the bulb, allowing it to be controlled via app or voice commands.
  • The dual control function allows for flexible placement. Consider installing one switch at each end of a hallway or staircase for convenience.

8. Maintenance

To ensure the longevity and proper functioning of your Yeelight Smart Wall Switch, follow these simple maintenance guidelines:

  • Cleaning: Wipe the surface of the switch with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the finish or internal components.
  • Inspection: Periodically check the switch for any signs of damage, loose connections, or unusual operation. If any issues are detected, consult a qualified electrician.
  • Environment: Ensure the switch remains in a dry environment, away from direct water exposure or high humidity, as specified in the safety information.

9. Troubleshooting

If you encounter issues with your Yeelight Smart Wall Switch, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Light does not turn on/off.No power, incorrect wiring, or bulb issue.Check circuit breaker. Verify wiring connections (L and L1). Test with a known working bulb.
Smart lamp cannot be controlled via app after switch installation.Switch is in Traditional Mode, or smart lamp lost power.Ensure the switch is set to Smart Mode (Atom Mode) as described in Section 6.1. Check if the smart lamp is powered and connected to your smart home system.
Switch feels loose or wobbly.Mounting screws are not tight.Turn off power at the breaker, then carefully tighten the mounting screws. Restore power.
Switch is unresponsive.Power interruption or internal fault.Turn off power at the circuit breaker for 30 seconds, then restore power. If the issue persists, contact customer support.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official Yeelight website or contact your retailer. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.