Altomex AL-1115/KA-8518 Portable Bluetooth Sound Box

Introduction

Thank you for purchasing the Altomex AL-1115/KA-8518 Portable Bluetooth Sound Box. This device is designed to provide clear and high-quality audio playback from various sources, including Bluetooth-enabled devices, FM radio, microSD cards, and USB flash drives. Please read this manual carefully to ensure proper use and to maximize your listening experience.

Package Contents

Please check the box for the following items:

• 1 x Altomex AL-1115/KA-8518 Portable Bluetooth Sound Box
• 1 x Micro USB (V8) / USB Charging Cable
• 1 x Instruction Manual

Product Overview

The Altomex AL-1115/KA-8518 features a compact design with intuitive controls and multiple playback options.

Controls and Ports:

• Top Panel Buttons: Typically include Power/Mode, Volume Down/Previous Track, Volume Up/Next Track, and Play/Pause/Call Answer.
• Rear Panel Ports:
  • USB Port: For USB flash drive playback.
  • TF Card Slot: For microSD card playback.
  • ON/OFF Switch: Power switch for the device.
  • Micro USB Port: For charging the speaker.

Setup

1. Charging the Speaker

1. Before first use, fully charge the speaker.
2. Connect the Micro USB end of the charging cable to the Micro USB port on the rear of the speaker.
3. Connect the standard USB end of the cable to a USB power adapter (not included) or a computer's USB port.
4. The charging indicator light (if present) will illuminate during charging and turn off when fully charged.
5. A full charge typically provides approximately 1 hour of reproduction time.

2. Powering On/Off

• To power on, slide the ON/OFF switch on the rear panel to the "ON" position. You will hear an audible prompt.
• To power off, slide the ON/OFF switch to the "OFF" position.

Operating Instructions

1. Bluetooth Pairing

1. Ensure the speaker is powered on and in Bluetooth mode (indicated by an audible prompt or LED).
2. On your mobile device, enable Bluetooth and search for available devices.
3. Select "AL-1115" or "KA-8518" (or similar name) from the list of devices.
4. Once paired, the speaker will confirm with an audible sound, and you can begin playing audio from your device.
5. The operating distance for Bluetooth is up to 10 meters (33 feet).

2. FM Radio Mode

1. With the speaker powered on, press the "M" (Mode) button to switch to FM Radio mode.
2. Press and hold the Play/Pause button to automatically scan and save available FM stations.
3. Use the Volume Up/Next Track and Volume Down/Previous Track buttons to navigate between saved stations.

3. MicroSD Card / USB Flash Drive Playback

1. Insert a MicroSD card into the TF card slot or a USB flash drive into the USB port.
2. The speaker will automatically detect the storage device and switch to the appropriate playback mode.
3. Use the Volume Up/Next Track and Volume Down/Previous Track buttons to skip tracks.
4. Press the Play/Pause button to pause or resume playback.

4. Call Function (Hands-Free)

• When connected via Bluetooth to your phone, incoming calls will be routed through the speaker.
• Press the Play/Pause button to answer an incoming call.
• Press the Play/Pause button again to end the call.

5. General Controls

• "M" (Mode) Button: Short press to switch between Bluetooth, FM Radio, MicroSD, and USB modes.
• Volume Down / Previous Track Button: Short press for previous track (Bluetooth/MicroSD/USB), long press to decrease volume.
• Volume Up / Next Track Button: Short press for next track (Bluetooth/MicroSD/USB), long press to increase volume.
• Play/Pause / Call Answer Button: Short press to play/pause audio or answer/end calls. Long press in FM mode to auto-scan stations.

Specifications

Troubleshooting

• Speaker does not turn on: Ensure the battery is charged. Connect the speaker to a power source using the provided USB cable.
• Cannot pair via Bluetooth:
  • Make sure the speaker is in Bluetooth mode.
  • Ensure your device's Bluetooth is enabled and within 10 meters of the speaker.
  • Turn off and on both the speaker and your device's Bluetooth, then try pairing again.
  • If previously paired, try "forgetting" the device on your phone and re-pairing.
• No sound from MicroSD/USB:
  • Ensure the MicroSD card or USB drive is inserted correctly.
  • Verify that the audio files on the card/drive are in a supported format.
  • Check if the speaker automatically switched to the correct mode; if not, press the "M" button to cycle modes.
• Poor FM radio reception:
  • Ensure the speaker is in an open area, away from obstructions or interference.
  • Perform an auto-scan for stations again by long-pressing the Play/Pause button in FM mode.
• Low volume or distorted sound:
  • Adjust the volume on both the speaker and your connected device.
  • Ensure the speaker is fully charged.
  • Move the speaker closer to your Bluetooth device to avoid signal interference.

User Tips

• For optimal sound quality, place the speaker on a stable, flat surface.
• Keep the speaker away from water and excessive moisture to prevent damage.
• When using FM radio, extending the charging cable (if connected) can sometimes act as an antenna to improve reception.
• To prolong battery life, fully charge the speaker before long periods of non-use.

Maintenance

• Clean the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Avoid exposing the speaker to extreme temperatures or direct sunlight.
• Do not attempt to disassemble the speaker, as this will void any potential warranty and may cause damage.

Warranty and Support

For information regarding warranty coverage or technical support, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.