K&F CONCEPT Mutate Series M1

Contents

K&F Concept Mutate Series M1 Travel Tripod Instruction Manual

Model: Mutate Series M1

1. Introduction

Thank you for choosing the K&F Concept Mutate Series M1 Travel Tripod. This professional-grade aluminum camera tripod is designed for portability, stability, and versatility, making it ideal for DSLR, mirrorless, and video cameras. With its compact design and robust features, it supports loads up to 15kg (33lbs) and extends to a maximum height of 177cm (70 inches). This manual provides detailed instructions for safe and effective use, ensuring you get the most out of your equipment.

2. Product Overview

2.1. Components

  • Tripod Legs (4-section)
  • Center Column
  • Ball Head (KF-35, if included)
  • Quick Release Plate
  • Leg Locking System (Quick Flip)
  • Multi-Angle Leg Locks
  • Rubber Feet
  • Counterweight Hook
  • Adjustment Key
  • Handbag (carrying case)
  • Shoulder Strap

2.2. Specifications

FeatureSpecification
Brand NameK&F CONCEPT
TypeProfessional Tripod
MaterialAluminum alloy
Max Extended Length1770mm (70.1 inches)
Folded Length500mm (19.7 inches)
Height without Center Column1460mm (57 inches)
Weight2100g (4.63 lbs)
Load Capacity15kg (33lbs)
Ball Head Diameter35mm (1.4 inches)
Ball Head Tilt Angle+90° ~ -55°
Use ForVideo Camera, DSLRs, Mirrorless System Camera

2.3. Package Contents

The package includes the following items, depending on the selected type:

Type A: Tripod without Ball Head

  • 1x Handbag
  • 1x Tripod (without ball head)
  • 1x Shoulder Strap
  • 1x Manual
  • 1x Adjustment Key
Package contents for Type A tripod without ball head

Image: Package contents for Type A (tripod without ball head, handbag, strap, manual, key).

Type B: Tripod with Ball Head

  • 1x Handbag
  • 1x Tripod (with ball head)
  • 1x Shoulder Strap
  • 1x Manual
  • 1x Adjustment Key
Package contents for Type B tripod with ball head

Image: Package contents for Type B (tripod with ball head, handbag, strap, manual, key).

2.4. Product Features

  • Special-shaped Compact Design: Folded size less than 500mm/20", ultra-lightweight at 1819g/4lbs. Fold diameter is less than a regular water bottle, making it highly portable.
  • Pro-Level Stability: Features an embedded locking base for tight leg locking, ensuring stability comparable to tripods without a center column.
  • Macro Photography Capability: The center column can be quickly detached or assembled in 3 seconds for ground-level macro or close-up photography.
  • Quick Flip Leg Locking System: Allows for fast extension and collapse of the 4-section legs.
  • High Compatibility: Equipped with a 1/4" thread and removable quick release plate, suitable for DSLRs, mirrorless, and video cameras. A 3/8" screw hole is available for mounting the tripod head on other accessories.
  • KF-35 Ball Head: Offers 360° panoramic shooting, a 1/4" interface, counterweight hook, and lever locks for precise adjustments.
K&F Concept Mutate Series M1 Tripod with ball head

Image: K&F Concept Mutate Series M1 Tripod with ball head attached.

Detailed view of KF-35 ball head features

Image: Close-up of the KF-35 ball head highlighting its features like 360° panning, 1/4" interface, counterweight hook, lever locks, and rubber feet.

3. Setup Instructions

3.1. Unfolding the Tripod

  1. Hold the tripod firmly and release the leg locks.
  2. Extend each leg section to your desired height.
  3. Secure each leg section by engaging the quick flip leg locking system.
  4. Adjust the leg angles using the multi-angle leg locks at the top of each leg to achieve stability on uneven surfaces.
Quick flip leg locking system

Image: Close-up demonstrating the quick flip leg locking system for fast lock/unlock.

3.2. Attaching Your Camera

  1. Ensure the quick release plate is securely attached to the bottom of your camera.
  2. Align the quick release plate with the receiver on the ball head.
  3. Slide the plate into the receiver and secure it using the locking mechanism on the ball head. Ensure it is tightly fastened to prevent accidental drops.

3.3. Adjusting the Center Column

  • Standard Height Adjustment: Loosen the center column lock, extend or retract the center column to the desired height, and then tighten the lock.
  • Macro Photography (Inverted Center Column):
    1. Loosen the center column lock and fully extend the center column.
    2. Locate the center column switch knob (as shown in the image) and press it to release the center column.
    3. Remove the center column.
    4. Invert the center column and reinsert it into the tripod base.
    5. Secure the center column with the switch knob and tighten the center column lock.
Steps to detach and install center column for macro photography

Image: Visual guide for detaching and installing the center column for macro photography.

3.4. Product Demonstration Video

Video: A demonstration of the K&F Concept Mutate Series M1 Tripod's features, including compact design, center column detachment, leg locking, and camera attachment.

4. Operating Instructions

4.1. Adjusting Height and Angle

  • Leg Height: Use the quick flip leg locks on each leg section to extend or retract the legs. Ensure all locks are securely fastened before use.
  • Leg Angle: Press the multi-angle leg locks at the top of each leg to adjust the spread of the legs. This allows for low-angle shots or increased stability on uneven terrain. The tripod supports three-angle adjustment for multiple scenarios.
  • Center Column Height: Loosen the center column lock, adjust the column, and re-tighten.
Tripod height adjustments

Image: Illustration of various tripod heights: 18.5 inches (47cm), 19.7 inches (50cm) folded, 57.5 inches (146cm) without center column, and 70.1 inches (178cm) max height.

4.2. Using the Ball Head (KF-35)

  • Pan Adjustment: Loosen the panoramic lock knob to rotate the camera 360 degrees horizontally. Tighten to secure.
  • Tilt Adjustment: Loosen the main locking knob to adjust the camera's tilt and swivel. The ball head allows for a tilt angle of +90° to -55°. Tighten the knob to fix the position.
  • Counterweight Hook: Use the hook at the bottom of the center column to hang a bag or weight for added stability, especially in windy conditions or with heavy camera setups.

5. Maintenance

  • Cleaning: Wipe the tripod with a soft, dry cloth after each use. For stubborn dirt, use a slightly damp cloth and mild soap, then dry thoroughly. Avoid harsh chemicals.
  • Lubrication: Periodically check leg locks and moving parts. If they become stiff, apply a small amount of silicone-based lubricant.
  • Storage: Store the tripod in its carrying bag in a dry, cool place away from extreme temperatures and humidity.
  • Inspection: Regularly inspect all screws, knobs, and leg locks for tightness. Use the provided adjustment key to tighten any loose components.
  • Rubber Feet: Ensure the rubber feet are clean and free of debris to maintain optimal grip.

6. Troubleshooting

  • Tripod is unstable:
    • Ensure all leg sections are fully extended and their quick flip locks are securely engaged.
    • Verify that the multi-angle leg locks are set to an appropriate position for the terrain.
    • Check if the center column lock is tightened.
    • Consider using the counterweight hook for added stability, especially with heavier cameras or in windy conditions.
  • Leg sections are difficult to extend/retract:
    • Clean the leg sections and locks to remove any dirt or grit.
    • Apply a small amount of silicone lubricant to the moving parts if necessary.
  • Camera not securely attached to ball head:
    • Ensure the quick release plate is properly mounted to your camera and fully inserted into the ball head receiver.
    • Tighten the ball head's locking mechanism completely.

7. User Tips

  • Maximize Portability: When traveling, utilize the tripod's compact folded size by collapsing all leg sections and removing the center column if desired. The included handbag and shoulder strap make transport easy.
  • Versatile Shooting: Don't hesitate to experiment with the inverted center column for unique macro shots or very low-angle perspectives.
  • Quick Setup: Practice using the quick flip leg locks to become proficient in rapidly deploying and collapsing the tripod, saving valuable time during shoots.
  • Camera Compatibility: This tripod is designed for a wide range of cameras including DSLRs, mirrorless systems, and video cameras. Always ensure your camera's weight is within the 15kg (33lbs) load capacity.

8. Warranty and Support

The K&F Concept Mutate Series M1 Travel Tripod comes with a 1-year warranty from the date of purchase, covering manufacturing defects. For warranty claims, technical support, or any inquiries, please contact K&F Concept customer service through their official website or your retailer.

Please retain your proof of purchase for warranty validation.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.