KLARUS XT2CR PRO

Contents

Klarus XT2CR PRO Tactical Flashlight User Manual

Model: XT2CR PRO | Brand: KLARUS

1. Introduction

This manual provides detailed instructions for the safe and efficient use of your Klarus XT2CR PRO Tactical Flashlight. Please read this manual thoroughly before operating the flashlight and retain it for future reference.

The Klarus XT2CR PRO is an upgraded, compact, and powerful tactical flashlight designed for daily use, outdoor adventures, emergency rescue, and tactical law enforcement. It features a high-end nano-aluminum alloy body, a CREE XHP35 HD LED with 2100 lumens output, and a unique dual tail switch for rapid control.

Klarus XT2CR PRO Tactical Flashlight

Image 1.1: Klarus XT2CR PRO Tactical Flashlight overview.

2. Package Contents

Verify that all items listed below are included in your package:

  • Klarus XT2CR PRO Tactical Flashlight
  • Klarus 18650 Rechargeable Battery (3100mAh)
  • USB-C Charging Cable
  • Holster
  • Lanyard
  • Spare O-ring
  • User Manual (this document)
Klarus XT2CR PRO Package Contents

Image 2.1: Contents of the Klarus XT2CR PRO package, including flashlight, battery, cable, holster, and manual.

3. Specifications

The following table details the technical specifications of the Klarus XT2CR PRO Tactical Flashlight:

Klarus XT2CR PRO Specifications Table

Image 3.1: Detailed specifications of the XT2CR PRO as provided by Klarus labs.

Feature Detail
Model XT2CR Pro
Dimensions Φ28mm(1.1") x Φ25.4mm(1") x 128mm(5.03")
LED CREE XHP35 HD 6500K
Output 2100LM
Working Voltage 2.8-6.4V
Charge Current 5V/1A
Charge Time 4h
Compatible Batteries 1 x 18650 or 2 x CR123A Batteries
Waterproof IPX8
Weight 139g (4.90oz) (w/o battery)
Warranty 5 Years
Body Material 6061-T6 Aerospace Aluminum Alloy
Lighting Distance 200-500 m (Beam reach up to 240m)
Switch Mode High/Middle/Low
Focal Length Non-adjustable
Charger Rechargeable (USB Type-C)

*Data is collected by Klarus labs. Actual application data may differ.

4. Setup

4.1 Battery Installation

  1. Unscrew the tail cap of the flashlight counter-clockwise.
  2. Insert one 18650 rechargeable battery with the positive (+) terminal facing towards the head of the flashlight. Alternatively, two CR123A batteries can be used.
  3. Screw the tail cap back on clockwise until it is securely tightened.

4.2 Charging

The XT2CR PRO features a direct USB Type-C charging port for convenient recharging.

  1. Locate the USB-C charging port cover on the side of the flashlight body.
  2. Gently lift the cover to expose the USB-C port.
  3. Connect the provided USB-C cable to the flashlight and plug the other end into a compatible USB power source (e.g., wall adapter, power bank, computer USB port).
  4. The intelligent battery capacity indicator will show the charging status:
    • Red light: Charging in progress.
    • Green light: Charging complete.
  5. Charging time is approximately 4 hours for a full charge.
  6. Once charging is complete, securely close the USB-C port cover to maintain the flashlight's waterproof rating.
USB-C Charging Port

Image 4.1: Close-up of the USB-C charging port on the flashlight body.

Charging Indicator Lights

Image 4.2: Visual representation of charging status indicators (Red for in progress, Green for complete).

5. Operating Instructions

The XT2CR PRO features a unique dual tail switch design for rapid and intuitive control, offering 6 lighting modes (Turbo, High, Medium, Low, Strobe, SOS) and 2 programmable settings (Outdoor/Tactical).

5.1 Tail Dual Switches Overview

Tail Dual Switches

Image 5.1: The dual tail switch design for professional rapid response tactical control.

The flashlight is equipped with two main tail switches: a larger primary switch (for power) and a smaller mode switch (for changing modes and special functions).

5.2 Programmable Settings

The XT2CR PRO offers two distinct operating settings: Outdoor and Tactical. These settings determine the default behavior of the switches and the order of brightness modes.

Tactical and Outdoor Settings

Image 5.2: Illustration of One-Touch Illumination, Strobe, and Low modes for tactical and outdoor use scenarios.

5.2.1 Outdoor Setting (Default)

  • Turn On/Off: Press the primary tail switch fully to turn on/off.
  • Momentary On: Half-press the primary tail switch. Release to turn off.
  • Change Brightness: With the light on, press the mode switch to cycle through Low → Medium → High → Turbo.
  • One-Touch Low: With the light off, press the mode switch to activate Low mode.
  • One-Touch Strobe: With the light off, press and hold the mode switch for 2 seconds to activate Strobe.
  • SOS Mode: From any constant-on mode, press and hold the mode switch for 3 seconds to activate SOS.

5.2.2 Tactical Setting

  • Switching to Tactical Setting: With the light off, press and hold the mode switch, then simultaneously press the primary tail switch. Release both when the light flashes to confirm the change.
  • Turn On/Off: Press the primary tail switch fully to turn on/off.
  • Momentary On (Turbo): Half-press the primary tail switch. Release to turn off.
  • One-Touch Strobe: With the light off, press the mode switch to activate Strobe.
  • Change Brightness: With the light on, press the mode switch to cycle through Turbo → High → Medium → Low.

5.2.3 Switching Between Settings

To switch between Outdoor and Tactical settings, with the flashlight off, press and hold the mode switch, then simultaneously press the primary tail switch. Release both when the light flashes to confirm the change.

6. Maintenance

Proper maintenance ensures the longevity and optimal performance of your Klarus XT2CR PRO flashlight.

6.1 General Care

  • Keep the flashlight clean, especially the lens and metal contacts. Use a soft, clean cloth.
  • Avoid dropping the flashlight or subjecting it to severe impacts, although it is designed with a robust 6061-T6 aerospace aluminum alloy body and is impact-resistant up to 1 meter.
  • The flashlight is IPX8 waterproof and dustproof. Ensure the USB-C charging port cover is securely closed when not charging to maintain its waterproof integrity.
IPX8 Waterproof Flashlight

Image 6.1: The XT2CR PRO demonstrating its IPX8 waterproof capability in water.

Durable 6061-T6 Aerospace Aluminum Alloy Body

Image 6.2: The flashlight's robust 6061-T6 aerospace aluminum alloy construction for extreme durability.

6.2 Battery Care

  • Recharge the 18650 battery regularly, especially if the flashlight is not used for extended periods.
  • If using CR123A batteries, ensure they are of good quality and replace them when depleted. Do not attempt to recharge non-rechargeable CR123A batteries.
  • Store batteries in a cool, dry place away from direct sunlight and extreme temperatures.
  • Remove batteries from the flashlight if it will not be used for an extended period to prevent potential leakage.

6.3 O-Ring Lubrication

To maintain the waterproof seal, periodically inspect and lubricate the O-rings with silicone grease. Replace O-rings if they appear damaged or worn.

7. Troubleshooting

If you encounter issues with your Klarus XT2CR PRO, refer to the following common problems and solutions:

Problem Possible Cause Solution
Flashlight does not turn on.
  • Battery depleted.
  • Battery inserted incorrectly.
  • Tail cap loose.
  • Dirty contacts.
  • Recharge or replace battery.
  • Ensure positive (+) terminal faces head.
  • Tighten tail cap securely.
  • Clean battery and flashlight contacts with an alcohol swab.
Light flickers or output is low.
  • Low battery.
  • Loose tail cap or head.
  • Dirty contacts.
  • Recharge battery.
  • Tighten all parts.
  • Clean contacts.
Flashlight gets hot during use.
  • Operating on Turbo/High mode for extended periods.
  • This is normal for high-output flashlights. Reduce to a lower brightness mode if it becomes uncomfortable.
Charging indicator not working.
  • Cable not properly connected.
  • Battery already full.
  • Faulty cable or power source.
  • Ensure secure connection.
  • Check if the light is already green.
  • Try a different USB-C cable or power adapter.

8. User Tips

  • Mode Memory: The flashlight typically remembers the last used constant-on brightness level (except Turbo/Strobe/SOS) when turned off and on again in Outdoor mode.
  • Quick Access: Utilize the one-touch functions of the tail switches for immediate access to Low or Strobe modes, which can be crucial in tactical or emergency situations.
  • Battery Compatibility: While the flashlight supports both 18650 and CR123A batteries, the included 18650 battery is rechargeable via the built-in USB-C port and generally offers longer runtimes and better performance.
  • Defensive Bezel: The flashlight features a defensive PVD Gray Crenelated Bezel, which can be used as a window-breaker or for self-defense in emergencies.
Flashlight with Window-Breaker and Self-Defense Features

Image 8.1: The XT2CR PRO's straight linear body design, highlighting its window-breaker and self-defense capabilities.

9. Warranty and Support

The Klarus XT2CR PRO Tactical Flashlight comes with a 5-year warranty from the date of purchase, covering manufacturing defects and workmanship. This warranty does not cover damage caused by misuse, unauthorized modifications, or normal wear and tear.

For warranty claims, technical support, or any inquiries, please contact your authorized Klarus dealer or visit the official Klarus website for customer service information.

Please retain your proof of purchase for warranty validation.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.