Joyroom JR-CA1

Contents

Joyroom TWS Wireless Bluetooth Earphones JR-CA1 User Manual

Model: JR-CA1

1. Product Overview

The Joyroom JR-CA1 TWS Wireless Bluetooth Earphones are designed to provide a high-quality audio experience with active noise cancellation and clear call technology. They feature a comfortable in-ear design, smart touch controls, and a long-lasting battery life.

Joyroom JR-CA1 TWS Wireless Bluetooth Earphones in white charging case
Joyroom JR-CA1 TWS Wireless Bluetooth Earphones and Charging Case

Package Contents

  • Joyroom JR-CA1 TWS Earphones (Left and Right)
  • Charging Case
  • USB Type-C Charging Cable
  • User Manual
  • Multiple sizes of Silicone Eartips
Contents of the Joyroom JR-CA1 package including black earbuds, charging case, eartips, and USB-C cable
Package contents: Earbuds, Charging Case, Eartips, and Charging Cable

2. Setup Guide

Initial Charging

  1. Place both earphones into the charging case.
  2. Connect the USB Type-C charging cable to the charging port on the case and plug the other end into a 5V/1A power adapter (not included).
  3. The indicator light on the charging case will show charging status. A full charge for the case takes approximately 1.5 hours.
  4. Ensure the earphones are fully charged before first use for optimal battery performance.

Wearing the Earphones

The earphones are designed for an in-ear fit. Choose the silicone eartips that provide the most comfortable and secure seal for your ears. A proper fit is crucial for effective noise cancellation and sound quality.

Pairing with Your Device

The JR-CA1 earphones feature simple one-step pairing:

  1. Open the charging case. The earphones will automatically enter pairing mode.
  2. On your smartphone or Bluetooth-enabled device, go to Bluetooth settings.
  3. Search for 'MG-CA1' in the list of available devices and select it to connect.
  4. Once connected, you will hear a confirmation tone, and the earphones are ready for use.
  5. For subsequent use, simply open the charging case, and the earphones will automatically connect to the last paired device.
Image showing a smartphone connected to 'MG-CA1' earbuds
Automatic pairing upon opening the charging case
Diagram illustrating simple pairing steps: open case, connect to phone, place back in case
Simple one-step pairing process

3. Operating Instructions

Smart Touch Controls

The earphones feature smart fingerprint touch controls for easy management of audio and calls. The built-in touch-sensing IC components allow for various functions with simple taps.

Diagram of smart touch controls for Joyroom JR-CA1 earbuds
Smart Touch Control Functions
  • Play/Pause: Tap once on either earphone.
  • Answer/Hang Up Call: Tap once on either earphone.
  • Reject Call: Press and hold either earphone for 2 seconds.
  • Previous Track: Double tap the left earphone.
  • Next Track: Double tap the right earphone.
  • Summon Voice Assistant: Press and hold the left earphone for 2 seconds.
  • Switch Ambient Monitoring/Noise Reduction: Press and hold either earphone for 3 seconds.

Active Noise Cancellation (ANC) and Ambient Mode

The JR-CA1 earphones offer two distinct listening modes:

  • Noise Reduction Mode: Effectively attenuates low-frequency environmental noise, ideal for quiet environments like a subway cabin.
  • Ambient Mode: Allows you to hear your surroundings while enjoying music. This mode enhances vocals, enabling clear communication without removing the earphones, suitable for offices or exercising outdoors.
Image showing two modes: Noise Reduction (person in subway) and Ambient Mode (person in office)
Two listening modes: Noise Reduction and Ambient

Call Technology

Equipped with DSP call noise reduction algorithm, the earphones accurately pick up human voice and effectively reduce background noise, ensuring clear calls even in noisy environments.

Diagram showing internal components for DSP call noise reduction, including feedforward microphone, call microphone, and DSP chip
DSP Call Noise Reduction Technology

Battery Life

The earphones provide approximately 5 hours of music playback (at 80% volume) and 3 hours of call duration (at 80% volume) on a single charge. The 400mAh charging case can recharge the earphones about 4 times, extending total usage time to over 20 hours.

Diagram illustrating battery life: 350h standby, 1.2h charging time, 24h listening with charging case
Extended Battery Life with Charging Case

4. Maintenance

Cleaning

  • Regularly clean the eartips and earphone surfaces with a soft, dry, lint-free cloth.
  • Remove eartips and clean any earwax or debris from the earphone nozzles using a small brush or cotton swab.
  • Ensure the charging contacts on both the earphones and the case are clean and dry to prevent charging issues.
  • Do not use abrasive cleaners or immerse the earphones or case in water.

Water and Dust Resistance

The Joyroom JR-CA1 earphones are rated IPX5 dustproof and waterproof. This means they are resistant to splashes and sweat, making them suitable for workouts and outdoor activities. However, they are not designed for submersion in water.

Person exercising with earbuds, highlighting IPX5 dustproof and waterproof rating
IPX5 Dustproof and Waterproof for active use

Storage

When not in use, always store the earphones in their charging case to protect them from damage and keep them charged.

5. Troubleshooting

Common Issues and Solutions

Earphones not pairing or connecting:
  • Ensure both earphones are in the charging case and fully charged.
  • Turn off Bluetooth on your device, then turn it back on.
  • Forget 'MG-CA1' from your device's Bluetooth list and try pairing again.
  • Ensure the earphones are within the 15m transmission distance of your device.
No sound or poor sound quality:
  • Check the volume level on both your device and the earphones.
  • Ensure the earphones are properly seated in your ears with a good seal.
  • Clean any debris from the earphone nozzles and eartips.
  • Try resetting the earphones (refer to the manufacturer's website for specific reset instructions if needed).
Earphones not charging:
  • Ensure the charging cable is securely connected to both the case and the power source.
  • Verify the power source is working.
  • Clean the charging contacts on both the earphones and the case.
  • Try a different USB Type-C cable or power adapter.
Noise cancellation not effective:
  • Ensure the earphones are properly fitted and sealed in your ears.
  • Switch between Noise Reduction Mode and Ambient Mode using the touch controls to confirm the mode is active.
  • Environmental noise reduction can reduce up to 90% of noise, but may not eliminate all sounds.
Lag during gaming or video playback:
  • The earphones utilize Bluetooth 5.0 technology designed for low latency. Ensure your device also supports Bluetooth 5.0 or higher for optimal performance.
  • Move closer to your device to minimize interference.
  • Close other applications running in the background on your device.

6. Specifications

FeatureSpecification
Model NumberJR-CA1
Brand NameJoyroom
Wearing MethodIn-ear
CommunicationTrue wireless
Wireless TypeBluetooth
Bluetooth Version5.0
Bluetooth Audio DecodingAAC, SBC
Supported ProtocolsHSP, HFP, A2DP, AVRCP
Active Noise-CancellationYes
With MicrophoneYes
Control ButtonYes
Volume ControlYes
Vocalism PrincipleDynamic
Driver Diameter13mm
Number Of Drivers1
Magnet TypeNeodymium
Impedance Rangeup to 32 Ω
Resistance32 Ω
Max Output3mW
Frequency Response Range50 - 10000Hz
Sensitivity118dB
Total Harmonic Distortion5%
Earphone Battery Capacity30mAh
Charging Case Battery Capacity400mAh
Music Duration5h (80% Volume)
Call Duration3h (80% Volume)
Standby TimeAbout 48h (Connected)
Charging TimeAbout 1.5h
Charging Input PortType C
InputDC 5V / 1A
Charging MethodCharging case
Charging Times Of Dual EarphonesAbout 4 Times
WaterproofYes (IPX5)
Net Weight52g
Functionfor Video Game, For Mobile Phone, HiFi Headphone, Sport
CertificationCE, FCC, RoHS
OriginMainland China

7. User Tips

  • Optimal Noise Cancellation: For the best active noise cancellation experience, ensure you select the correct size eartips that provide a snug and comfortable seal in your ear canal. A poor fit can significantly reduce ANC effectiveness.
  • Situational Awareness: Utilize the Ambient Mode when you need to be aware of your surroundings, such as when walking in traffic or interacting with people, without having to remove your earphones.
  • Regular Cleaning: Keep the eartips and charging contacts clean to maintain hygiene, prevent sound degradation, and ensure reliable charging.
  • Gaming Performance: While the earphones are designed for low latency, for critical gaming sessions, ensure your device's Bluetooth is optimized and minimize other wireless interference.

8. Warranty and Support

Joyroom products are manufactured to high-quality standards. For any issues or concerns, please refer to the warranty information provided at the time of purchase or contact Joyroom customer support. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.