Brother BAS-311G 326H 311HN

Contents

Brother Electronic Pattern Sewing Handheld Programmer

Models: BAS-311G, BAS-326H, BAS-311HN

Instruction Manual

1. Introduction

This manual provides essential information for the safe and effective use of the Brother Electronic Pattern Sewing Handheld Programmer, compatible with models BAS-311G, BAS-326H, and BAS-311HN. This device is designed to facilitate pattern programming and management for industrial sewing machines, enhancing operational efficiency and precision. Please read this manual thoroughly before operating the programmer and retain it for future reference.

2. Safety Information

Always observe the following safety precautions to prevent injury or damage to the equipment:

  • Ensure the programmer is disconnected from the sewing machine and power source before cleaning or maintenance.
  • Do not expose the device to moisture, extreme temperatures, or direct sunlight.
  • Use only the specified power adapter and cables.
  • Avoid dropping the device or subjecting it to strong impacts.
  • Keep out of reach of children.
  • If the device malfunctions, discontinue use immediately and contact qualified service personnel.

3. Product Overview

The handheld programmer features a clear display, an intuitive keypad, and essential ports for connectivity. Familiarize yourself with the components shown below:

Front view of the Brother handheld programmer showing the screen and keypad.
Figure 3.1: Front view of the programmer, displaying the screen, directional pad, and alphanumeric keypad.
Angled view of the Brother handheld programmer.
Figure 3.2: Angled view of the handheld programmer, providing a general perspective of its design.
Side view of the Brother handheld programmer showing DCN power input and data port.
Figure 3.3: Side view of the programmer, highlighting the DCN power input and a data port for machine connection.
Close-up of the data port connector on the Brother handheld programmer.
Figure 3.4: Close-up of the data port connector on the side of the programmer, used for connecting to the sewing machine.

4. Setup

Follow these steps to set up your handheld programmer:

  1. Power Connection: Connect the appropriate power adapter to the DCN port on the side of the programmer (refer to Figure 3.3). Plug the adapter into a suitable power outlet.
  2. Machine Connection: Locate the data port on your Brother BAS-311G, 326H, or 311HN electronic pattern sewing machine. Connect the programmer to the machine using the provided data cable. Ensure a secure connection at both ends.
  3. Power On: Press the power button on the programmer. The display should illuminate, indicating the device is ready for use.
  4. Initial Configuration: Upon first use or after a reset, you may be prompted to set language, date, and time. Follow the on-screen instructions to complete these settings.

5. Operating Instructions

The handheld programmer allows for various functions related to pattern management. General operations include:

  • Navigation: Use the directional pad to move through menus and options on the screen.
  • Selection: Press the 'Enter' or 'OK' button (usually the center button of the directional pad) to select an option or confirm an action.
  • Input: Use the alphanumeric keypad to enter pattern names, parameters, or other data as required.
  • Pattern Selection: Access the 'Pattern' menu to browse and select pre-loaded sewing patterns.
  • Pattern Editing: If supported, navigate to the 'Edit' function to modify existing patterns or create new ones. This may involve adjusting stitch length, density, or sequence.
  • Saving/Loading: Use the 'Save' function to store new or modified patterns and 'Load' to retrieve them from memory.
  • Transfer to Machine: Once a pattern is ready, use the 'Transfer' or 'Send' function to upload it to the connected sewing machine.
  • System Settings: Adjust display brightness, sound, and other system preferences through the 'Settings' menu.

Refer to the on-screen prompts and the specific documentation for your sewing machine model for detailed instructions on advanced programming features.

6. Maintenance

Proper maintenance ensures the longevity and optimal performance of your programmer:

  • Cleaning: Gently wipe the screen and casing with a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Do not spray liquids directly onto the device.
  • Storage: Store the programmer in a cool, dry place away from direct sunlight and excessive dust when not in use.
  • Battery Care: If the device contains a rechargeable battery, follow the manufacturer's guidelines for charging and discharging to maximize battery life. Avoid leaving it fully discharged for extended periods.
  • Cable Inspection: Regularly check the power and data cables for any signs of wear, fraying, or damage. Replace damaged cables immediately.

7. Troubleshooting

If you encounter issues with your handheld programmer, try the following solutions:

ProblemPossible CauseSolution
Programmer does not power onNo power, faulty cable, discharged batteryCheck power adapter connection. Ensure power outlet is functional. Charge battery if applicable.
Screen is blank or frozenSoftware glitch, temporary errorPerform a soft reset (if available, consult device documentation) or power cycle the device.
Cannot connect to sewing machineLoose cable, incorrect port, machine not readyEnsure data cable is securely connected to both programmer and machine. Verify machine is powered on and in programming mode.
Patterns not transferringConnection issue, incompatible pattern formatCheck cable connection. Ensure pattern format is compatible with the sewing machine model.

If the problem persists after attempting these solutions, contact customer support.

8. Specifications

FeatureDetail
Stitch FormationLock Stitch
TypeIndustrial Sewing Machine Accessory
OriginMainland China
Package Length30 cm
Package Width18 cm
Package Height20 cm
Package Weight1.0 kg

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.