1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your S6-61 E-Bike Quantum 6-Tube Sine Wave Controller and LED Display. Please read this manual thoroughly before use to ensure proper function and safety.
Important Safety Information
⚠️️ Please be aware of potential fire risks and strictly adhere to the instructions provided in this manual for charging and storage of your E-Bike system components.
Note: This is a customized product. It is highly recommended to contact the seller or a qualified technician for specific compatibility and installation guidance if you are unsure.
2. Specifications
The S6-61 E-Bike Controller and Display system offers robust performance for electric bicycles and scooters.
| Feature | Specification |
|---|---|
| Model | S6-61 |
| Type | Controller (E-Bike) |
| Rated Voltage | 24V / 36V / 48V |
| Cutoff Voltage | 19V / 29V / 39V ±0.5V |
| Maximum Current Output | 15A ±1A |
| Rated Current | 7A |
| Motor Power | 350W |
| Rated Working Current | 6~25A |
| Maximum Working Current | 30mA |
| Off-state Leakage Current | <1μA |
| Working Temperature | -20℃ ~ 60℃ |
| Storage Temperature | -30℃ ~ 70℃ |
| Cover Color (Controller) | Silver |
| Cover Color (Display) | Black |
| Origin | Mainland China |
For detailed specifications on the controller, refer to the product label:

3. Package Contents
Your package should contain the following items:
- 1 x S6-61 E-Bike Quantum 6-Tube Sine Wave Controller
- 1 x S6-61 LED Display Unit with integrated cable


4. Installation Guide
Installation of E-Bike components requires basic electrical knowledge. If you are not confident in performing the installation yourself, please seek assistance from a professional E-Bike technician.
4.1 Controller Placement
Mount the controller in a secure, dry location on your E-Bike, away from direct water exposure and excessive vibration. Ensure adequate airflow for cooling.

4.2 Wiring Connections
The controller features multiple color-coded wires for various connections. While a detailed wiring diagram is not provided in this manual, general connections typically include:
- Power Wires: Connect to your E-Bike battery (ensure correct polarity).
- Motor Wires: Connect to your E-Bike motor (usually three phase wires and five Hall sensor wires).
- Display Wire: Connect to the S6-61 LED display unit.
- Throttle Wire: Connect to the E-Bike throttle.
- Brake Lever Wires: Connect to the E-Bike brake levers (often with cut-off function).
- PAS (Pedal Assist System) Sensor Wire: Connect to the pedal assist sensor.
- Light Wire: For connecting an E-Bike light (if applicable).
Always double-check all connections before applying power to prevent damage to the controller or other components.
4.3 Display Unit Mounting
Mount the S6-61 LED display unit on your handlebar in a position that is easily visible and accessible during riding. Secure it firmly to prevent movement.

5. Operating Instructions
The S6-61 LED display provides essential information and controls for your E-Bike.
5.1 Display Overview
Refer to Figure 4.2 for the layout of the display unit. Key indicators and buttons include:
- Power Button (①): Turns the E-Bike system ON/OFF.
- Light Button (LIGHT): Activates/deactivates the E-Bike lights (if connected).
- Mode Button (MODE): Cycles through different riding modes or display information.
- 6KM/H Button: Activates walk-assist mode (6 km/h).
- Assist Level Indicators: Shows the current level of pedal assist.
- Battery Level Indicator: Displays the remaining battery charge.
- '+' and '-' Buttons: Adjust the pedal assist level or other settings.
5.2 Basic Operation
- Power ON/OFF: Press and hold the Power button (①) to turn the system on or off.
- Adjust Assist Level: Use the '+' and '-' buttons to increase or decrease the pedal assist level. The assist level indicators will change accordingly.
- Activate Lights: Press the 'LIGHT' button to turn your E-Bike lights on or off.
- Walk-Assist Mode: Press and hold the '6KM/H' button to engage walk-assist mode, which propels the bike at a slow, steady speed for easy maneuvering while walking.
- Change Display Mode: Press the 'MODE' button to cycle through different display information, such as speed, distance, etc. (functionality may vary based on specific E-Bike setup).
6. Maintenance
To ensure the longevity and optimal performance of your S6-61 controller and display, follow these maintenance guidelines:
- Cleaning: Wipe the display and controller with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners.
- Water Exposure: Avoid direct exposure to heavy rain or submersion in water. While the components are designed for outdoor use, excessive moisture can cause damage.
- Cable Inspection: Periodically check all cables and connectors for wear, damage, or loose connections. Secure any loose connections and replace damaged cables immediately.
- Storage: When not in use for extended periods, store your E-Bike in a dry, temperate environment.
7. Troubleshooting
This section addresses common issues you might encounter with your S6-61 E-Bike system.
7.1 General Issues
- System Not Powering On:
- Check battery charge level.
- Ensure all power connections to the controller are secure.
- Verify the power button on the display is functioning correctly.
- Motor Not Responding:
- Check motor phase wire and Hall sensor connections.
- Ensure throttle and PAS sensor are correctly connected and functioning.
- Verify the assist level is set above zero.
- Display Not Showing Information:
- Check the connection between the display and the controller.
- Ensure the system is powered on.
7.2 Compatibility Questions
- Q: Is this controller compatible with an SW900 screen?
A: Compatibility with specific third-party screens like the SW900 cannot be guaranteed without verification. Please consult the seller or a qualified technician with details of your existing setup for confirmation. - Q: Can I install a 48V 20Ah battery with this controller?
A: The controller supports 48V batteries. The 20Ah capacity refers to the battery's energy storage, which is generally compatible as long as the voltage matches. However, always ensure your battery's discharge current capabilities meet the motor's requirements and that all components are rated for 48V.
7.3 Defective Products
If you receive a defective product, do not sign the shipping bill. It is the shipping company's responsibility. Please take photos of the defective product and contact the seller immediately for a refund or replacement.
8. User Tips
- For optimal performance, ensure your E-Bike's motor, battery, and other electrical components are compatible with the S6-61 controller's voltage and current specifications.
- Regularly check all wiring connections for tightness and signs of wear to prevent intermittent issues.
- When customizing your E-Bike, always prioritize safety and consult with experienced technicians for complex modifications.
9. Warranty and Support
The seller strives to provide excellent service and support for your product.
9.1 Return Policy
If you wish to return the goods within 15 days of receipt due to product defects, damage, or any fault of the seller (not due to personal preference or misuse), a refund will be issued. Returned items must be in their original condition.
9.2 Fast Delivery & Refund Guarantees
The seller offers the following guarantees:
- A coupon code if delivery is delayed.
- Refund if the package is lost.
- Refund if items are damaged upon arrival.
- Refund if no delivery occurs within 30 days.
For any questions or problems, please contact the seller directly. Provide your order number and, if applicable, images or videos of defective products to facilitate a quick resolution.
