1. Introduction
Thank you for choosing the Tuya Smart Tubular Motor GM25TEQ. This motor is designed to automate your roller or zebra blinds, offering convenient control via Wi-Fi, voice commands through smart assistants like Alexa and Google Home, and the Tuya Smart Life app. This manual provides essential information for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

Figure 1: Tuya Smart Tubular Motor compatible with Alexa, Google Home, and Smart Life.
2. Product Overview
The GM25TEQ is a compact and efficient tubular motor designed for integration into existing or new roller and zebra blind systems. It features a built-in Wi-Fi chip for direct mobile control and supports popular smart home ecosystems.
2.1 Components
- Tubular Motor (GM25TEQ)
- Power Cable
- Set Key (for programming)
- Signal Receiving Line

Figure 2: Motor components and dimensions (453mm length).

Figure 3: Motor label indicating model GM25TEQ-1.1/34, AC100-240V, 1.1Nm, 34r/min, 12W, IP44.
3. Setup and Installation
3.1 Mechanical Installation
- Ensure the blind tube has an inner diameter suitable for the 38mm motor.
- Insert the tubular motor into the blind tube.
- Mount the blind assembly securely using appropriate brackets (not included, typically part of the blind system).
3.2 Electrical Connection
- Connect the motor's power cable to an AC 100-240V power supply. Ensure all connections are secure and comply with local electrical codes.
- The signal receiving line should be positioned to ensure optimal Wi-Fi signal reception.
3.3 App Pairing and Limit Setting
- Download the Tuya Smart or Smart Life app from your mobile app store.
- Register or log in to your account.
- Power on the motor. The motor should enter pairing mode (often indicated by a blinking light or a short jog).
- In the app, tap '+' to add a new device. Select 'Curtain Motor' or 'Blinds Motor' and follow the on-screen instructions to connect to your Wi-Fi network.
- Once paired, use the app to set the upper and lower limits for your blinds. This defines the full open and full closed positions. Refer to the app's specific instructions for precise limit setting procedures.
- If using Alexa or Google Home, link your Tuya Smart/Smart Life account within their respective apps.
4. Operating Instructions
4.1 Mobile App Control
Open the Tuya Smart or Smart Life app. Select your motor from the device list. You can then use the app interface to:
- Open the blinds fully.
- Close the blinds fully.
- Adjust the blinds to a specific percentage (e.g., 50% open).
- Set schedules for automatic opening and closing.
- Create scenes to control multiple devices simultaneously.
4.2 Voice Control
Once linked with Alexa or Google Home, you can use voice commands:
- Alexa: "Alexa, open the living room blinds." "Alexa, close the bedroom blinds." "Alexa, set the kitchen blinds to 50%."
- Google Home: "Hey Google, open the living room blinds." "Hey Google, close the bedroom blinds." "Hey Google, set the kitchen blinds to 50%."
Video 1: Demonstration of smart blind operation via voice control.
5. Maintenance
The Tuya Smart Tubular Motor GM25TEQ requires minimal maintenance. Follow these guidelines to ensure its longevity:
- Cleaning: Wipe the exterior of the motor and blind components with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Inspection: Periodically check the power cable and signal receiving line for any signs of damage.
- Lubrication: The motor is factory-lubricated and does not require additional lubrication.
6. Troubleshooting
Common Issues and Solutions:
- Motor not responding to app/voice commands:
- Check if the motor is powered on and the power cable is securely connected.
- Ensure your Wi-Fi network is active and the motor is within range.
- Verify that the Tuya Smart/Smart Life app is connected to the internet.
- Restart the motor by disconnecting and reconnecting power.
- Check if the motor is still paired with the app. If not, re-pair it.
- Blinds not moving to correct limits:
- Re-calibrate the upper and lower limits using the Tuya Smart/Smart Life app.
- Ensure there are no obstructions preventing the blinds from reaching their full travel.
- Difficulty pairing with the app:
- Ensure your Wi-Fi network is 2.4GHz (5GHz networks are often not supported by smart home devices).
- Move the motor closer to your Wi-Fi router during the pairing process.
- Reset the motor to factory settings (refer to app instructions or product documentation for the 'Set Key' usage).
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | GM25TEQ-1.1/34 |
| Voltage | AC 100-240V |
| Wattage | 12W |
| Rolling Speed | 34 R/min |
| Torque | 1.1 N.m |
| Application | Roller blinds or Zebra blinds |
| Certification | CE |
| Origin | Mainland China |
| Suitable Tube Diameter | 38mm |
| Motor Length | 453mm |
| Protection Rating | IP44 |
| Connectivity | Wi-Fi (2.4GHz) |
| Compatibility | Tuya Smart, Smart Life, Amazon Alexa, Google Home |
8. User Tips
- Stable Wi-Fi: Ensure your Wi-Fi network is stable and strong in the area where the motor is installed for reliable smart control.
- Limit Calibration: Take your time during the initial limit setting. Accurate calibration ensures smooth and precise operation of your blinds.
- Power Check: If the motor becomes unresponsive, always check the power supply first before attempting other troubleshooting steps.
- App Updates: Keep your Tuya Smart/Smart Life app updated to the latest version to benefit from new features and bug fixes.
9. Warranty and Support
This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims. For technical support or further assistance, please refer to the Tuya Smart Life app's help section or contact the seller directly.