MDNG Canbus LED Interior Light Kit Instruction Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your MDNG Canbus LED Interior Light Kit. Designed to enhance the interior lighting of your Suzuki Ignis, these LED bulbs offer superior brightness and energy efficiency. Please read this manual thoroughly before installation to ensure proper function and safety.

2. Package Contents

The contents of your kit may vary slightly depending on the specific model year of your Suzuki Ignis. Please verify you have received all components listed for your vehicle.

3. Specifications

4. Installation Instructions

⚠ Warning: Choose the same size as the original bulb according to the package you purchased, and install it according to the example of the picture.

⚠ Important Safety Note: Please turn off the light first before installation and be careful while removing the stock bulb, as it may be very hot.

Follow these steps for a successful installation:

1. Remove the cover: Use the supplied installation tool to carefully pry open the lamp housing cover.
2. Remove the stock bulb: Gently pull out the original halogen bulb from its socket.
3. Install the LED bulb: Insert the new LED bulb into the socket. If the light does not immediately turn on, remove it, flip it 180 degrees, and reinsert it. LEDs are polarity sensitive.
4. Test the light: Before replacing the cover, turn on the light to ensure the new LED bulb is functioning correctly.
5. Replace the cover: Once the LED bulb is working, carefully snap the lamp housing cover back into place.

5. Operating Instructions

Once installed, the LED interior lights operate automatically with your vehicle's existing lighting system (e.g., when doors open, or manually switched on). No special operation is required. The Canbus Error Free design ensures seamless integration with your car's electrical system.

6. Maintenance

The LED bulbs are designed for long-term use with a lifespan of up to 50,000 hours, requiring minimal maintenance. To ensure optimal light output, keep the lamp covers clean. Avoid using abrasive cleaners that could scratch the plastic or damage the bulb. If a bulb fails, it can be replaced individually following the installation steps.

7. Troubleshooting

• Light does not turn on after installation: If an LED bulb does not light up, remove it, flip it 180 degrees, and reinsert it. LEDs are polarity sensitive.
• Bulb is loose in socket: Gently move the metal pin clips closer together to ensure a tighter fit for the festoon bulb.
• Error message on dashboard: This kit is designed to be Canbus Error Free. If an error occurs, double-check the installation and ensure the correct bulb type was used for your vehicle model and year.

8. User Tips

• Always turn off the vehicle's power or the specific light circuit before attempting any bulb replacement to prevent electrical shorts or injury.
• Use the provided installation tool to avoid damaging your vehicle's interior trim during cover removal.
• Double-check the compatibility of the bulb types and quantities with your specific Suzuki Ignis model year before starting installation.

9. Warranty and Support

All MDNG LED Interior Light Kits come with a 1-Year Warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product functions as described under normal use.

For technical support, warranty claims, or any inquiries, please contact the manufacturer or authorized representative: