1. Product Overview
The JUNCTEK PSG9080/9060 is a programmable DDS dual-channel arbitrary wave function generator designed for professional use in scientific research, technology engineering, electronic design, and educational settings. It features a 3.5-inch LCD screen, a wide range of waveform outputs, and multiple modulation modes. The device supports both PC software and mobile app (Bluetooth) control for enhanced flexibility.


2. Package Contents
Please verify that all items listed below are included in your package:
- 1 x Signal Generator (PSG9080 or PSG9060 model)
- 1 x Power Cable
- 1 x BNC Male Plug Test Lead
- 1 x USB Data Cable
- 1 x BNC to Alligator Clips Test Lead
- 1 x Quick Start Guide

3. Setup
3.1 Initial Power-Up and Language Selection
- Connect the power cable to the AC power socket on the rear panel of the instrument.
- Press the power switch to turn on the device.
- Upon initial power-up, the device will enter the language selection interface. Use the navigation keys to select 'English' and confirm.
3.2 Connecting to External Devices
The PSG9080/9060 features various input and output interfaces:
- Signal Input Connectors: For external signal input.
- Signal Output Connectors (CH1, CH2): For outputting generated waveforms.
- TTL Ext. Interface: For external TTL signals.
- USB Interface: For PC communication and control.
- DC5V Power Input: For external DC power supply.
- SYNC IN/OUT: For synchronization with other devices.

3.3 PC and APP Control Setup
The signal generator can be monitored and controlled via PC software or a mobile application using Bluetooth. The PC software allows for free drawing of arbitrary waveforms and offers powerful functions. The mobile app provides a simple and clear operation interface, covering most functions available on the instrument panel.
- PC Control: Connect the device to a computer via the USB interface. Install the dedicated PC software. The software allows monitoring, setting parameters, and drawing arbitrary waveforms.
- APP Control: Connect the mobile phone app through Bluetooth. This enables remote control and parameter adjustment.
Note: The PC software may have compatibility issues. Please pre-install and test before purchasing if this is a critical feature for your application.

For software and driver downloads, please visit: http://68.168.132.244/PSG9000/material.html
4. Operating Instructions
4.1 Front Panel Controls
The front panel provides intuitive controls for various functions:
- 3.5 Inch Color Screen: Displays waveform parameters, system settings, and other information.
- Shortcut Keys: Dedicated buttons for quick access to common functions.
- Numeric Keyboards: For precise input of frequency, amplitude, and other numerical values.
- Knob: Used for fine-tuning parameters.
- Direction Key: For navigating menus and adjusting settings.
- Channel Control Keys (CH1, CH2): To select and control individual output channels. The 'OUT' key can switch between CH1 and CH2 channels simultaneously.
- Function Soft Key: Context-sensitive keys that change function based on the current menu.

4.2 Waveform Generation
The device supports a rich variety of waveforms:
- Sine wave
- Square wave
- Triangle wave
- DC level
- Arbitrary wave
- Pulse wave (with adjustable duty ratio, pulse width, and cycle time)
- Rising ramp, falling ramp, CMOS wave, half wave, full wave, positive step wave, inverse staircase wave, exponential rise, exponential fall, Lorentz pulse wave, multisonic wave, random noise wave, trapezoidal pulse wave, Sinker pulse wave.
- Up to 99 sets of user-defined waveforms.
4.3 Modulation Functions
The PSG9080/9060 offers powerful modulation capabilities:
- AM (Amplitude Modulation)
- FM (Frequency Modulation)
- PM (Phase Modulation)
- ASK (Amplitude Shift Keying)
- FSK (Frequency Shift Keying)
- PSK (Phase Shift Keying)
- PWM (Pulse Width Modulation)

4.4 Burst Function
The burst function allows generating a specific number of waveform periods. Sine, square, saw tooth, or arbitrary waves can be used. The number of periods is continuously adjustable between 1 and 1,000,000,000.
More diversified trigger modes are available:
- Manual Trigger
- CH2 Trigger
- External Trigger (AC)
- External Trigger (DC)

4.5 Pulse Width Adjustment
The pulse width and pulse cycle time of the pulse wave are digitized and accurately adjustable, allowing for precise setting of the pulse waveform in a wide range without jitter. Pulse offset/amplitude is continuously adjustable and can be accurate to 0.01V.
- Pulse width adjustment range: 20ns-4s
- Pulse period adjustment range: 20ns-40s

4.6 Programmable Mode
The type of waveform output (such as sine wave, square wave, triangle wave, arbitrary wave, etc.), output time, and output sequence can be freely programmed to realize automatic work. The device can debug and routinely store 100 groups of programs, each with 100 steps.
Parameters that can be set in programming interfaces include Mode, POO, No., Load, Time, GoTo, and Loop.

4.7 Measurement and Counter Functions
The device includes functions for measuring frequency, positive and negative pulse width, period, and duty cycle. The counter range is 0-4294967295.
4.8 Frequency Sweep Function
The sweep function allows for sweeping frequency, amplitude, and duty cycle. Sweep modes include linear and logarithmic.
4.9 External Input Signal Voltage Control Function (VCO)
The VCO function enables external control over frequency, amplitude, and duty cycle.
4.10 System Settings and Display Themes
The system setup menu allows configuration of various parameters such as clear memory, sound, brightness, language, and information about built-in and arbitrary waveforms. The device also offers four personalized color schemes for the display, which can be saved using the soft key.

4.11 Product Demonstration Video
5. Maintenance
To ensure the longevity and optimal performance of your JUNCTEK PSG9080/9060, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the exterior of the device. Do not use abrasive cleaners or solvents.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Avoid dropping or subjecting the device to strong impacts.
- Ventilation: Ensure the heat dissipation holes on the rear panel are not obstructed to prevent overheating.
6. Troubleshooting
- Device does not power on: Check the power cable connection and ensure the power switch is in the 'ON' position. Verify the power source is active.
- No waveform output: Ensure the correct channel (CH1 or CH2) is selected and enabled. Check the output connections and parameters (frequency, amplitude, offset).
- PC/APP control not working: Verify USB or Bluetooth connection. Ensure the correct drivers/software are installed and updated. Check for compatibility issues with your operating system.
- Display issues: Adjust brightness in system settings. If the screen is unresponsive or shows artifacts, try restarting the device.
- Unexpected behavior: Perform a system reset (if available in settings) or power cycle the device. If issues persist, contact customer support.
7. Specifications
| Feature | Specification (PSG9060) |
|---|---|
| Model | PSG9060 |
| Channel | 2 |
| Sine wave frequency range | 1nHz-60MHz |
| Sampling rate | 300MSa/s |
| Wave length | 8192 points/channel |
| Waveform vertical resolution | 14 bits |
| Wave type | Sine, square, pulse (duty ratio, pulse width and cycle time can be precisely set), triangle, rising/falling ramp, CMOS, DC level, half/full wave, positive step, inverse staircase, exponential rise/fall, Lorentz pulse, multisonic, random noise, trapezoidal pulse, Sinker pulse, and 99 user-defined waveforms. |
| Square wave frequency range | 1nHz-30MHz |
| Triangle wave frequency range | 1nHz-50MHz |
| Frequency resolution | 1nHz |
| Rise/Fall Time | ≤10nS |
| Amplitude range (<1MHz) | 2mVpp~25Vpp |
| Amplitude range (1-11MHz) | 2mVpp~10Vpp |
| Amplitude range (11-60MHz) | 2mVpp~5Vpp |
| Amplitude resolution | 1mVpp |
| Amplitude stability | ± 1% ±1mVpp (@ 1kHz, >10mVpp) |
| Amplitude flatness | Frequency≤10MHz: ±1%(0.1dB) 10MHz<Frequency≤50MHz: ±2%(0.2dB) 50MHz<Frequency≤60MHz: ±10%(0.9dB) |
| Offset range | -9.99V-12.00V |
| Offset resolution | 0.01V |
| Phase adjustment range | 0°-359.9° |
| Phase resolution | 0.1° |
| Output impedance | 50Ω (typical) |
| Modulation type | AM, FM, PM, ASK, FSK, PSK, PWM |
| Trigger source | Manual burst, CH2 burst, external burst (AC), external burst (DC) |
| Measurement function | Frequency, positive and negative pulse width, period, duty cycle |
| Counter range | 0-4294967295 |
| Sweep function | Sweep frequency, sweep amplitude, sweep duty |
| Sweep mode | Linear, logarithmic |
| VCO function | Frequency control, amplitude control, and duty cycle control |
| Program mode | Debug and routinely store 100 groups of programs, each with 100 steps |
| Product dimension | 247*243*102mm |
| Net weight | 1038g |
| Package dimension | 340*280*140mm |
| Gross weight | 1900g |
8. User Tips
- Always ensure proper grounding when connecting the signal generator to other electronic equipment to prevent damage and ensure accurate readings.
- Familiarize yourself with the numeric keypad and knob for efficient parameter adjustment. The knob is particularly useful for fine-tuning.
- Utilize the dual-channel output feature to generate complex signals or test multiple circuits simultaneously.
- For advanced applications, explore the PC software for arbitrary waveform editing and programming sequences.
- Regularly check the manufacturer's website for firmware updates to ensure you have the latest features and bug fixes.
9. Warranty and Support
9.1 Warranty Information
- One-Year Guarantee: The product comes with a one-year guarantee from the date of receipt.
- Defective Items: If the item is defective upon receipt, it should be returned within 7 days for exchange. All original and undamaged items must be returned in re-saleable condition.
- Warranty Exclusions: The warranty does not cover products that are physically damaged or operating under abnormal conditions due to misuse or improper installation.
9.2 Customer Support
For any technical assistance, troubleshooting, or warranty claims, please contact JUNCTEK customer support. Refer to the official JUNCTEK website for contact details and further support resources.