1. Introduction
Thank you for choosing the Dongcheng DQU120*2 Electric Mortar and Paint Mixer. This professional-grade tool is designed for efficient and thorough mixing of various materials, including paints, textures, plasters, mortars, and resins. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your mixer. Please read it carefully before use and keep it for future reference.
2. Product Overview
2.1 What's in the Box
Upon unpacking, please ensure all items listed below are present and undamaged:
- 1 x Dongcheng DQU120*2 Electric Mixer Unit
- 2 x Mixing Paddles
- 2 x Carbon Brushes (spare)
- 2 x Wrenches (for assembly/disassembly)
- 1 x Operation Instructions Manual (this document)
Figure 1: Electric Mixer and included accessories.
2.2 Key Components
- Motor Unit: Houses the 1400W motor and speed control.
- Ergonomic Handles: Designed for comfortable and secure grip during operation.
- Mixing Spindles: Two shafts where the mixing paddles attach.
- Mixing Paddles: Dual paddles for efficient material blending.
- Speed Adjustment Dial: Allows for variable speed control.
- Power Cord: For connecting to a 220V power supply.
- Carbon Brush Covers: For easy access to carbon brushes for replacement.
3. Technical Specifications
| Specification | Value |
|---|---|
| Power Input | 1400W |
| Voltage | 220V |
| No-load Speed | 0-700 r/min |
| Mixing Paddle Diameter | 120mm |
| Spindle Thread | M27x1.5 |
| Weight | 4.8 kg |
4. Safety Instructions
WARNING: Read all safety warnings, instructions, illustrations, and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury.
4.1 General Power Tool Safety
- Work Area Safety: Keep your work area clean and well-lit. Cluttered or dark areas invite accidents.
- Electrical Safety: Ensure the power supply matches the specifications on the tool. Do not expose power tools to rain or wet conditions.
- Personal Safety: Always wear appropriate personal protective equipment (PPE) such as safety glasses, gloves, and hearing protection. Do not overreach. Keep proper footing and balance at all times.
- Tool Use and Care: Do not force the power tool. Use the correct power tool for your application. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools.
4.2 Specific Mixer Safety
- Ensure the mixing paddles are securely attached before operation.
- Always place the mixer in the material to be mixed before starting the tool, and lift it out only after it has stopped.
- Do not operate the mixer near flammable liquids or gases.
- Keep hands and loose clothing away from rotating parts.
- Use both hands to hold the mixer firmly during operation.
5. Setup
5.1 Attaching the Mixing Paddles
- Ensure the mixer is unplugged from the power source.
- Align the threaded end of each mixing paddle with the corresponding spindle on the mixer unit.
- Screw the paddles onto the spindles clockwise until hand-tight.
- Use the provided wrenches to firmly tighten the paddles, ensuring they are secure and will not loosen during operation.
5.2 Power Connection
Connect the mixer's power cord to a suitable 220V electrical outlet. Ensure the outlet is properly grounded and capable of handling the 1400W power draw of the mixer.
6. Operating Instructions
6.1 Preparing for Mixing
- Place the material to be mixed in a sturdy, appropriately sized mixing container.
- Ensure the container is stable and will not tip over during mixing.
- Wear all necessary PPE.
6.2 Basic Operation
- Before plugging in, set the speed adjustment dial to a low setting.
- Carefully immerse the mixing paddles into the material in the container.
- Plug the mixer into the 220V power outlet.
- Press the trigger switch to start the mixer.
- Gradually increase the speed using the adjustment dial to achieve the desired mixing consistency.
- Move the mixer slowly through the material to ensure even blending.
- Once mixing is complete, release the trigger switch and wait for the paddles to come to a complete stop before removing the mixer from the material.
- Unplug the mixer from the power source after use.
6.3 Mixing Different Materials
The DQU120*2 is suitable for a wide range of materials. For thicker or more viscous materials, start with a lower speed to prevent splashing and gradually increase as the material begins to blend. For thinner liquids, a moderate speed may be sufficient. The dual mixing paddles ensure efficient and homogeneous mixing for various applications.
7. Maintenance
7.1 Cleaning
- Always unplug the mixer before cleaning.
- Clean the mixing paddles immediately after use to prevent material from hardening on them. Use water and a brush for water-based materials, or appropriate solvents for other materials.
- Wipe down the motor unit and handles with a damp cloth. Do not use harsh chemicals or immerse the motor unit in water.
- Ensure all vents are clear of debris to prevent overheating.
7.2 Carbon Brush Replacement
The carbon brushes are designed to be easily replaceable to facilitate maintenance. When the motor performance decreases or the tool stops working, the carbon brushes may need replacement.
- Unplug the mixer from the power source.
- Locate the carbon brush covers on the sides of the motor housing.
- Unscrew the covers using a screwdriver or coin.
- Carefully remove the old carbon brushes.
- Insert the new carbon brushes (provided as spares) into their slots, ensuring they are oriented correctly.
- Replace and tighten the carbon brush covers.
- Run the mixer at a low speed for a few minutes without load to allow the new brushes to seat properly.
7.3 Storage
Store the mixer in a clean, dry place, out of reach of children. Disassemble the mixing paddles for more compact storage if desired.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mixer does not start | No power supply; Faulty power cord/plug; Worn carbon brushes | Check power outlet and connections; Inspect power cord; Replace carbon brushes. |
| Reduced power/speed | Worn carbon brushes; Overload; Material too thick | Replace carbon brushes; Reduce load; Add appropriate liquid to material. |
| Excessive vibration/noise | Loose mixing paddles; Bent paddle; Internal issue | Tighten paddles; Inspect paddles for damage; Contact support if issue persists. |
If you encounter problems not listed here or if solutions do not resolve the issue, please contact customer support.
9. User Tips
- Start Slow: Always begin mixing at the lowest speed setting to prevent splashing and gain control over the material.
- Consistent Movement: Move the mixer in a circular or figure-eight motion through the material to ensure all parts are thoroughly mixed.
- Proper Container: Use a container that is large enough to accommodate the material and the mixer without overflowing, especially when mixing at higher speeds.
- Check Consistency: Periodically stop the mixer and check the material's consistency to ensure it meets your requirements.
- Clean Immediately: Cleaning the paddles and mixer head immediately after use will save time and effort, as dried material is much harder to remove.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to your purchase documentation or contact the seller directly. Keep your proof of purchase for any warranty claims.