Midea RG10G5(1)/CEU1 RG51(1)/CEFU1

Contents

Instruction Manual for Midea Air Conditioner Remote Control

Models: RG10G5(1)/CEU1, RG51(1)/CEFU1

Introduction

This manual provides instructions for the operation and maintenance of your Midea Air Conditioner Remote Control, compatible with various Midea, Brothers, Magnavox, Omega, CL, and Keystone air conditioning units. This remote control operates using Infrared (IR) communication at a frequency of 433 MHz, designed for intuitive control of your air conditioner's functions.

Front view of the Midea air conditioner remote control
Front view of the remote control, displaying temperature and mode settings.

Setup

Battery Installation

  1. Locate the battery compartment on the back of the remote control.
  2. Slide the battery cover downwards or in the direction indicated by an arrow to open it.
  3. Insert two AAA batteries (not included), ensuring the positive (+) and negative (-) terminals match the diagrams inside the compartment. The remote requires 3VDC power.
  4. Slide the battery cover back into place until it clicks securely.

Once batteries are installed, the remote control should be ready for immediate use with compatible air conditioning units without additional pairing.

Back view of the Midea remote control showing battery compartment
Back view of the remote control, indicating battery compartment and model information.

Operating Instructions

Point the remote control directly at the air conditioner's receiver when operating. Ensure there are no obstructions between the remote and the unit.

Button Functions:

  • ON/OFF: Press to turn the air conditioner unit on or off.
  • MODE: Cycles through operating modes: AUTO, COOL, DRY.
  • TEMP ▲ / ▼: Adjusts the desired temperature setting upwards or downwards.
  • FAN SPEED: Cycles through fan speed settings: HIGH, MED, LOW.
  • SHORT CUT: Activates a pre-set or favorite operating mode.
  • SLEEP: Activates the sleep mode, which adjusts temperature for comfortable sleep and energy saving.
  • TIMER ON: Sets a timer for the unit to turn on automatically.
  • TIMER OFF: Sets a timer for the unit to turn off automatically.
  • °C/°F: Toggles the temperature display between Celsius and Fahrenheit.
  • LED DISPLAY: Turns the air conditioner's LED display on or off.
  • ENERGY SAVER: Activates energy-saving functions.
  • Lock Symbol Button: (Often located near °C/°F) May activate a child lock or button lock function to prevent accidental changes. Press and hold for a few seconds to activate/deactivate.
Angled view of the Midea remote control highlighting buttons
Angled view of the remote control, showing button layout.

Maintenance

Battery Replacement

Replace batteries when the remote control's display dims or its range decreases. Always replace both batteries at the same time with new AAA batteries.

Cleaning

Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the surface or internal components.

Storage

If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage to the device. Store in a cool, dry place.

Troubleshooting

  • Remote not responding:
    • Check if the batteries are inserted correctly with the correct polarity.
    • Replace old batteries with new ones.
    • Ensure there are no obstructions between the remote control and the air conditioner's receiver.
    • Confirm the remote is pointed directly at the air conditioner.
  • Display is dim or blank:
    • This usually indicates low battery power. Replace the batteries.
  • Air conditioner not responding to specific functions:
    • Verify that the air conditioner unit supports the specific function you are trying to use.
    • Ensure the remote control model is fully compatible with your specific air conditioner model.

Specifications

FeatureDetail
Model NumbersRG10G5(1)/CEU1, RG51(1)/CEFU1
Compatible BrandsMidea, Brothers, Magnavox, Omega, CL, Keystone
Wireless CommunicationIR (Infrared)
Frequency433 MHz
Power Source2 x AAA Batteries (3VDC)
Channel1
OriginMainland China
Approx. Package Dimensions (L x W x H)18 cm x 13 cm x 2 cm
Approx. Package Weight0.2 kg

User Tips

  • For optimal performance, use high-quality alkaline batteries.
  • Keep the remote control away from direct sunlight or heat sources to prolong its lifespan.
  • If you have multiple air conditioners, ensure you are pointing the remote at the correct unit to avoid unintended operation.

Warranty and Support

For warranty information, please refer to the terms provided by your original seller or the air conditioner manufacturer. This remote control is a replacement part, and its warranty may be covered under the terms of the original purchase or by the seller of this specific remote.

For technical support or further assistance, please contact your product retailer or the manufacturer of your air conditioning unit.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.