TEYUN A6

Contents

TEYUN A6 6-Channel Audio Mixer

Instruction Manual

Introduction

The TEYUN A6 is a professional 6-channel audio mixer designed for various applications including karaoke, home parties, church events, broadcasting, podcasting, studio recording, and live performances. It features 4 mono and 1 stereo channel, 24 DSP effects, 48V phantom power, USB connectivity for playback and recording, Bluetooth functionality, and a sound card for computer integration.

TEYUN A6 6-Channel Audio Mixer front view
Front view of the TEYUN A6 6-Channel Audio Mixer.

Key Features

  • 6 Channels (4 Mono + 1 Stereo)
  • USB Power Supply: 5V DC
  • Bluetooth Functionality
  • Integrated Sound Card for Computer Playback and Recording
  • Mobile Broadcast/Podcast Function
  • USB Playback and Recording
  • 24 Digital Signal Processing (DSP) Effects
  • +48V Phantom Power for condenser microphones (Channels 1 & 2)

Setup Guide

1. Power Supply

The mixer operates on DC 5V 2A power. You can power it using the included power adapter, a computer's USB port, or a power bank.

Power supply options for TEYUN A6 mixer
The mixer can be powered by a power adapter, computer, or power bank.

Power Supply Interfaces:

  • Micro B: Press down the button next to the USB ports to select the Micro B interface for power supply only.
  • Type-B: Bounce up the button to select the Type-B interface for both power supply and data transmission (e.g., connecting to a computer).

Note: The Micro B interface is for power supply only. The Type-B interface supports both power and data transmission.

Micro B and Type-B power supply interfaces
Micro B (left) and Type-B (right) power/data interfaces.

The included USB cable is 1 meter (3.3 ft) long and features a Type-A connector on one end and a Type-B connector on the other.

USB cable included with the mixer
Included USB cable (Type-A to Type-B).

2. Connecting Microphones

Dynamic Microphones:

When using a dynamic microphone, do NOT turn on the +48V phantom power, as this may damage the microphone. Always use an XLR plug for dynamic microphones; a 6.3mm plug may result in very low sound output.

Connecting a dynamic microphone to the mixer
Dynamic microphone connection. Ensure +48V is OFF and use an XLR cable.

Condenser Microphones:

Ensure your condenser microphone supports +48V phantom power. If it does, activate the +48V phantom power switch to supply power to the microphone. The phantom power is only available for XLR inputs on Channels 1 and 2.

Connecting a condenser microphone to the mixer
Condenser microphone connection. Turn ON +48V phantom power for compatible microphones.
+48V Phantom power switch for Channels 1 and 2
The +48V phantom power switch activates power for XLR inputs on Channels 1 and 2.

3. Connecting to a Computer (Soundcard Function)

The mixer features a built-in sound card, allowing two-way audio transmission with a computer via a USB cable.

  1. Connect the mixer to your computer using the USB cable (Type-A to Type-B).
  2. Ensure the Type-B interface is selected on the mixer (button bounced up).
  3. Press the FX/PC REC button on the channel.
  4. Press the MODE button to select "PC" status on the mixer's display.
Mixer connected to PC via USB, showing signal flow
Audio mixer signal can be transmitted to the computer, and vice-versa.
Steps to connect mixer to PC
Visual guide for connecting the mixer to a PC.

4. Connecting to a Mobile Device (Broadcast/Podcast Function)

You can connect your mobile phone to the audio mixer via the TRRS socket for mobile recording, live broadcasting, or playing music through the mixer.

Mobile broadcast/podcast function diagram
Diagram showing mobile phone connectivity for broadcast/podcast.

Note: The TRRS cable for mobile connection is not included and must be purchased separately.

Mobile phone connected to mixer via TRRS cable
Example of mobile phone connected to the mixer. Cable not included.

Operating Instructions

1. Bluetooth Operation

Pairing:

  1. Press the MODE button until "BLUE" appears on the display. The "BLUE" indicator will flash, indicating it's waiting for pairing.
  2. On your mobile device, open Bluetooth settings and select "A6" from the available devices.
  3. Once connected, the "BLUE" indicator will stop flashing.
Bluetooth pairing status on mixer display
"BLUE" flashing indicates pairing mode.
Mobile phone Bluetooth settings showing A6 connected
Confirm "A6" is connected in your mobile's Bluetooth settings.

Volume Control for Bluetooth:

  1. Rotate the PC/BT/MP3 knob to adjust the Bluetooth input volume.
  2. Rotate the MAIN knob to adjust the overall main output volume.
Adjusting Bluetooth and Main Out volumes
Adjust Bluetooth volume with the PC/BT/MP3 knob and main output with the MAIN knob.

2. USB Playback

The mixer supports USB playback of MP3, WAV, WMA, and FLAC audio formats.

  1. Insert a USB stick containing audio files into the USB port.
  2. Press the button next to the USB ports to select "USB" status.
  3. Press the MODE button to choose "USB" on the display.
Steps for USB playback
Insert USB, select USB status, then choose MP3 mode.

Volume Control for USB Playback:

  1. Rotate the PC/BT/MP3 knob to adjust the USB playback volume.
  2. Rotate the MAIN knob to adjust the overall main output volume.
Adjusting USB and Main Out volumes
Adjust USB volume with the PC/BT/MP3 knob and main output with the MAIN knob.

3. USB Recording

  1. Prepare for Recording:
    1. Insert a USB stick into the USB port.
    2. Press the button next to the USB ports to select "USB" status.
    3. Press down the FX/PC REC button of the desired channel.
    4. Press the MODE button to choose "BLUE" status (this seems to be a mislabeling in the source, it should likely be a recording mode indicator).
  2. Start/Stop Recording:
    1. Long press the PLAY/PAUSE button to start recording. A "REC" mark will appear on the display.
    2. Long press the PLAY/PAUSE button again to stop recording.
  3. Adjust Recording Volume:
    1. Adjust the input channel volume knob to control the recording volume.
    2. If you do not want effects in your recording, press down the MUTE FX button. The effect display will show "24", indicating no effect is applied.
  4. Play Recorded File:
    1. Press the MODE button to enter USB status.
    2. Press the "Previous" button to navigate to the last recorded song. It will play automatically.
USB Recording preparation steps
Steps to prepare for USB recording.
Long press PLAY/PAUSE to record
Long press PLAY/PAUSE to start/stop recording.
Adjusting recording volume and muting FX
Adjust channel volume for recording. Press MUTE FX to remove effects.
Muting FX (effect display shows 24)
When FX is muted, the display shows "24".
Playing recorded file from USB
Press the previous track button to play the recorded file.

4. Computer Playback and Recording

Playing Music from Computer:

  1. Ensure the mixer is connected to the computer via USB and set to "PC" mode (see Setup Guide).
  2. Open your computer's music player program and start playing music.
  3. Rotate the PC/BT/MP3 knob on the mixer to adjust the volume of the music coming from the computer.
  4. Rotate the MAIN knob to adjust the overall main output volume.
Playing music from computer and adjusting volumes
Adjust PC/BT/MP3 knob for computer audio input and MAIN knob for overall output.

Recording from Computer:

  1. Ensure the mixer is connected to the computer via USB and set to "PC" mode.
  2. Open your computer's recording software.
  3. Select the TEYUN A6 mixer as both the microphone (input device) and speaker (output device) in your software settings.
  4. Rotate the channel volume knobs and the FX/PC REC knob to adjust the volume of the audio being recorded.
  5. If you do not want effects in your recording, press the MUTE FX button. The effect display will show "24", indicating no effect is applied.
Recording from computer and adjusting volumes
Adjust channel volume and FX/PC REC knob for recording from computer.
Muting effects for computer recording
Press MUTE FX to disable effects during computer recording.

5. Mobile Recording Volume Adjustment

  1. Connect your microphone to Channel 1 of the audio mixer.
  2. Connect your mobile phone to the mixer via the TRRS socket.
  3. Adjust the input channel volume knob for the microphone.
  4. Adjust the MAIN output volume knob for the overall recording level.
Mobile record connection setup
Connect microphone to Channel 1 and mobile to TRRS socket for recording.
Adjusting input channel and main out volume for mobile recording
Adjust input channel volume and MAIN volume for mobile recording.

6. Effect Adjustment (24 DSP Effects)

The mixer includes 24 DSP effects. The 24th effect is a vocal effect, which means it has no original voice and no additional effect is applied.

List of 24 DSP effects
List of available 24 DSP effects.

Adjusting Effect Volume:

  1. Rotate the FX/PC REC knob to increase or decrease the effect volume output to the channel.
  2. Press down the FX/PC REC button to enable the effect input to the channel.
  3. Bounce up the FX/PC REC button to disable the effect input to the channel.
Adjusting FX/PC REC knob for effect volume
Rotate the FX/PC REC knob to adjust effect volume.
Pressing FX/PC REC button to enable/disable effect
Press FX/PC REC button to toggle effect on/off for the channel.

Specifications

AttributeValue
Brand NameTEYUN
Model NumberA6
TypeMixers
OriginMainland China
CertificationNONE
Channel6 channels (4 Mono+1Stereo)
BluetoothYes
Effect24 DSP Effects
USB Play formatYes (MP3, WAV, WMA, FLAC)
Connect to MobileYes
Phantom Power+48V Phantom power (for CH1/CH2 XLR)
Soundcard FunctionYes
Power SupplyDC 5V 2A
ApplicationBroadcast/Podcast/Studio/Recording
Built-in BatteryNo
Dimensions (L x W x H)22.5 cm x 20.5 cm x 5.5 cm (8.9 in x 8.1 in x 2.2 in)
TEYUN A6 Mixer dimensions
Dimensions of the TEYUN A6 Audio Mixer.

Packing List

ItemQuantity
Audio Mixer1 piece
USB Cable1 piece
Power adapter1 piece
Packing list for TEYUN A6 mixer
Contents included in the product package.

Troubleshooting

  • No Sound / Low Sound from Dynamic Microphone:
    Ensure +48V phantom power is OFF. Use an XLR cable, not a 6.3mm plug, for dynamic microphones to avoid low sound output.
  • Dynamic Microphone Damaged:
    Always ensure +48V phantom power is OFF when connecting or using dynamic microphones.
  • No Effect Applied:
    If the effect display shows "24", it means the effect is muted. Press the MUTE FX button to enable effects, or adjust the FX/PC REC knob.
  • Bluetooth Not Pairing:
    Ensure the mixer is in "BLUE" flashing mode. Check your mobile device's Bluetooth settings and try reconnecting.
  • USB Playback/Recording Issues:
    Ensure the USB stick is properly inserted and the mixer is set to the correct "USB" or "PC" mode. Verify audio file formats are supported (MP3, WAV, WMA, FLAC).

Maintenance

  • Keep the mixer clean by wiping it with a soft, dry cloth.
  • Avoid exposing the mixer to excessive moisture, dust, or extreme temperatures.
  • Do not use harsh chemicals or abrasive cleaners.
  • Store the mixer in a cool, dry place when not in use.
  • Handle all knobs and buttons gently to prevent damage.

User Tips

  • Power Source Flexibility: The ability to power the mixer via a power bank makes it highly portable for outdoor or remote use.
  • Effect Customization: Experiment with the 24 DSP effects to find the perfect sound for your vocals or instruments. Remember that effect '24' is a vocal effect with no additional processing.
  • Computer Integration: Utilize the sound card function for seamless recording and playback with your computer, making it ideal for home studios or live streaming.
  • Mobile Connectivity: For mobile recording or live streaming, ensure you have a compatible TRRS cable (not included) for optimal performance.

Warranty and Support

For any technical assistance, warranty claims, or support inquiries, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific contact details and warranty terms.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.