1. Introduction
This manual provides detailed instructions for the safe and effective use of the SUNSHINE SS-917C Dust-Free Workbench. This device is designed to create a clean environment for mobile phone screen LCD OCA laminating, film application, and dust removal during maintenance and repair. Key features include dual LED lighting (green for dust detection, white for illumination), a three-layer filtration system, and a double fan for efficient dust removal.
2. Setup
2.1 Unpacking and Inspection
Carefully unpack all components from the box. Verify that all items listed in the 'Product Information' section are present and undamaged. If any items are missing or damaged, please contact customer support.

Figure 1: Exploded view of the workbench showing internal components and accessories.
2.2 Placement
Place the workbench on a stable, level surface. Ensure there is adequate space around the unit for proper ventilation and ease of use. The workbench is equipped with non-slip feet to prevent shifting during operation.

Figure 2: Non-slip feet for stable placement.
2.3 Power Connection
Connect the provided 3C certified thickened grounding power cord to the workbench and then to a suitable power outlet (110V-220V, 750mA). Ensure the power switch is in the 'Off' position before connecting.

Figure 3: 3C certified thickened grounding power cord.
2.4 Filter Installation
The workbench features a built-in removable and washable filter. Ensure the filter is correctly seated in its compartment before first use. Refer to the maintenance section for details on cleaning and replacement.

Figure 4: Removable and washable filter.
2.5 Worktable Adjustment
The worktable features an exquisite card slot design allowing for lifting and anti-skid positioning, providing a stable and comfortable working surface.

Figure 5: Worktable with card slot design for stability.
2.6 Silicone Storage Mat
A thickened silicone storage mat (34*23cm) is included to protect your work surface and organize small components.

Figure 6: Thickened silicone storage mat.
3. Operating Instructions
3.1 Power On/Off
Locate the power switch on the side of the workbench. Flip the switch to 'On' to power the unit. Flip to 'Off' when not in use.
3.2 Fan Speed Adjustment
The workbench features a double fan design with an adjustable wind speed knob. Rotate the knob to control the fan's intensity, providing strong or weak airflow as needed for your task.

Figure 7: Wind speed adjustment knob and double fan.
3.3 LED Lighting Modes
The workbench is equipped with dual LED lighting, offering both green and white light modes. Use the 'Light Change' switch to toggle between modes and the 'Bright Adjustment' knob to adjust brightness.

Figure 8: LED brightness adjustment and light change controls.
3.3.1 Green Light Mode (Dust Detection)
Activate the green light mode to easily identify tiny dust particles on your work surface or device. The green light highlights dust, making it visible and ensuring a truly dust-free environment for sensitive operations like OCA laminating.

Figure 9: Workbench with green light for dust detection.

Figure 10: Green light effectively shows dust particles.
3.3.2 White Light Mode (Illumination)
Switch to white light mode for general illumination of your workspace. This bright light helps illuminate tiny bubbles and small parts, making detailed work easier and more precise.

Figure 11: Workbench with white light for general illumination.

Figure 12: White light illuminates tiny bubbles and parts for easier work.
3.4 Working Area
The workbench provides a large working area of 34.5 x 23 cm, offering ample space for mobile phone repair and laminating tasks.

Figure 13: Large working area (34.5 x 23 cm).
3.5 Product Demonstration Video
Video 1: Demonstration of the SUNSHINE SS-917C Dust-Free Workbench in use, showing dust detection and OCA laminating.
4. Maintenance
4.1 Filter Cleaning and Replacement
The workbench utilizes a three-layer filtration system to effectively intercept PM2.5 particles and ensure a high purification rate. The filters are removable and washable for easy maintenance.
- Regularly check the filters for accumulated dust and debris.
- To clean, carefully remove the filters. They can be gently washed with water and mild soap, then allowed to air dry completely before reinstallation.
- Replace filters if they show signs of wear or damage, or if cleaning no longer restores their effectiveness.

Figure 14: Three-layer filtration system for health protection.
4.2 General Cleaning
Keep the workbench surfaces clean by wiping them with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners that could damage the finish or electronic components.
5. Troubleshooting
If you encounter any issues with your SUNSHINE SS-917C Dust-Free Workbench, please refer to the following common problems and solutions:
- No Power: Ensure the power cord is securely connected to both the workbench and a functional power outlet. Check the power switch is in the 'On' position.
- Fan Not Working: Verify the unit is powered on and the wind speed adjustment knob is not set to minimum. Check for any obstructions in the fan area.
- Lights Not Working: Confirm the unit is powered on and the 'Light Change' switch is correctly positioned. Adjust the 'Bright Adjustment' knob to increase brightness.
- Ineffective Dust Removal: Check if the filters are clean and properly installed. Increase the fan speed using the adjustment knob.
If the problem persists after attempting these solutions, please contact customer support for further assistance.
6. Specifications

Figure 15: Product Information Table.
| Attribute | Value |
|---|---|
| Brand | SUNSHINE |
| Product Name | High clarity clean table (Filter upgrade) |
| Model Number | SS-917C |
| Product Size | 35 x 23.2 x 31 cm |
| Package Size | 37 x 29 x 39 cm |
| Working Size | 34.5 x 23 cm |
| Net Weight | 5.025 kg |
| Gross Weight | 5.795 kg |
| Voltage | 110V-220V |
| Rated Current | 750mA |
| Configuration | Double LED, double fan, silicone pad, folding board, power cord |
| DIY Supplies | Electrical |
| Suitable For | Metal |
| Movable | No |
| Handheld | No |
| Battery Included | No |
| Power Source | AC |
| Certification | NONE |
| Origin | Mainland China |
| Package | BOX |
7. Warranty and Support
The SUNSHINE SS-917C Dust-Free Workbench comes with a free return policy within 90 days of purchase. For any product-related inquiries, technical support, or warranty claims, please contact the seller or authorized service center. Keep your purchase receipt as proof of purchase.