Fujitsu General AR-JW17

Contents

Fujitsu General Air Conditioner Remote Control User Manual

Model: AR-JW17 (Compatible with AR-JW19, AR-JW27, AR-JW31, AR-JW4)

1. Introduction

This manual provides instructions for the proper use and maintenance of your Fujitsu General Air Conditioner Remote Control, model AR-JW17, and its compatible variants. This remote control uses Infrared (IR) wireless communication to operate your air conditioning unit.

2. Setup

2.1. Battery Installation

The remote control requires two AAA batteries (R03 / LR03 x 2). Follow these steps to install them:

  1. Open the battery compartment cover located on the back of the remote control.
  2. Insert two AAA batteries, ensuring that the (+) and (-) polarities are aligned correctly as indicated inside the compartment.
  3. Close the battery compartment cover securely.

Important Battery Precautions:

  • Do not mix old and new batteries.
  • Do not use batteries of different types together.
  • Remove batteries if the remote control will not be used for an extended period to prevent leakage.
Back view of the AR-JW17 remote control with battery compartment instructions.
The back of the remote control shows the battery compartment cover and instructions for battery installation, specifying AAA/R03/LR03 x 2 batteries and polarity alignment.

2.2. Initial Use

This remote control is a replacement unit designed to be compatible with specific Fujitsu General Air Conditioner models (AR-JW17, AR-JW19, AR-JW27, AR-JW31, AR-JW4). Generally, no programming is required. Once batteries are installed, it should be ready for immediate use with a compatible air conditioner unit.

3. Operating Instructions

Familiarize yourself with the buttons and display on your remote control:

Front view of the AR-JW17 remote control showing display and buttons.
This image displays the front of the remote control, highlighting the LCD screen with clock and temperature, and various control buttons such as SLEEP, TIMER, MASTER CONTROL, SET TEMP, SET TIME, FAN CONTROL, HEAT, AUTO, +, -, SET, SWING, TIME ADJUST, ACL, and START/STOP.

3.1. Basic Functions

  • START/STOP: Press this large orange button to turn the air conditioner ON or OFF.
  • Temperature Adjustment (+/-): Use the '+' and '-' buttons to increase or decrease the desired temperature.
  • Mode Selection (HEAT, AUTO): The remote typically cycles through modes like Heat, Cool, Dry, Fan, and Auto. The display shows the current mode (e.g., 'HEAT', 'AUTO').
  • FAN CONTROL: Adjusts the fan speed of the air conditioner.
  • SWING: Controls the louver movement for air direction.

3.2. Advanced Functions

  • SLEEP: Activates or deactivates the sleep mode, which often adjusts temperature gradually for comfort during sleep.
  • TIMER: Used to set ON/OFF timers for the air conditioner. Refer to your air conditioner's main manual for detailed timer programming.
  • CLOCK / TIME ADJUST: To set the current time on the remote's display. Press 'TIME ADJUST' and use the '+' and '-' buttons to set the time, then press 'SET TIME' to confirm.
  • MASTER CONTROL / SET TEMP / SET TIME / FAN CONTROL: These buttons are typically used in conjunction with other buttons (like '+' or '-') to configure specific settings.
  • ACL (All Clear): This button is usually a small recessed button used to reset the remote control to its factory default settings. Use a pointed object (like a pen tip) to press it if necessary.

4. Maintenance

4.1. Cleaning

  • Wipe the remote control with a soft, dry cloth.
  • Do not use liquid cleaners, sprays, or abrasive materials, as these can damage the remote's surface or internal components.

4.2. Battery Replacement

Replace batteries when the remote's display becomes dim or if the remote becomes unresponsive. Always replace both batteries at the same time with new ones of the same type (AAA).

5. Troubleshooting

5.1. Remote Control Not Working

If your remote control is not functioning with your air conditioner unit, consider the following:

  • Batteries: Ensure batteries are correctly installed and are good, working batteries. Try rolling the batteries inside the compartment to ensure proper contact with the springs.
  • Compatibility: Verify that the remote control model (AR-JW17) is compatible with your specific Fujitsu General Air Conditioner model.
  • Programming: This remote is generally pre-programmed. If it were a universal remote, specific programming steps would be required. For specific pairing instructions, refer to your air conditioner's operating manual.
  • IR Receiver: The infrared receiving diode on your air conditioner unit might be faulty, especially with older units.
  • Physical Damage: Inspect the remote for any signs of physical damage that might have occurred during transit or use.

5.2. How to Test Your IR Remote Control Using a Mobile Camera

You can quickly check if your remote's IR emitter is working:

  1. Ensure batteries are correctly inserted and functional.
  2. Turn on your digital camera or open the camera app on your mobile phone. (Note: Some iPhone rear cameras may filter IR light; use the front-facing camera if needed. This may apply to other phone brands as well.)
  3. Point the top edge of the remote control (where the IR emitter is located) towards the camera lens.
  4. Press any button on the remote while observing the IR emitter through your camera screen. If the remote is working, you will see a flickering light coming from the emitter on the camera screen.

6. Specifications

FeatureSpecification
Model NumberAR-JW17 (Compatible: AR-JW19, AR-JW27, AR-JW31, AR-JW4)
UseAir Conditioner
Wireless CommunicationInfrared (IR)
Battery Type2 x AAA (R03 / LR03)
PackageYes
OriginMainland China
CertificationNone
Dimensions (L x W x H)Approx. 30 cm x 15 cm x 5 cm
WeightApprox. 0.12 kg

7. User Tips

  • Model Compatibility: Always double-check the model number of your air conditioner against the compatible models listed for the remote control to ensure proper function.
  • Battery Life: For optimal performance, use high-quality alkaline batteries.
  • Line of Sight: Ensure there is a clear line of sight between the remote control's IR emitter and the air conditioner's IR receiver for reliable operation.

8. Warranty and Support

For any issues not covered in this manual, or if you require further assistance, please contact the seller or manufacturer directly. Keep your purchase records for warranty claims, if applicable.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.