ISUDAR Wireless Carplay & Android Auto AI Upgrade Adapter

Contents

ISUDAR Wireless Carplay & Android Auto AI Upgrade Adapter User Manual

Model: Wireless Carplay & Android Auto AI Upgrade Adapter (CP31NDCVO8818WGNV)

1. Introduction

This manual provides detailed instructions for the installation, operation, and troubleshooting of your ISUDAR Wireless Carplay & Android Auto AI Upgrade Adapter. This device is designed to enhance your Volvo driving experience by integrating advanced smartphone connectivity features into your vehicle's original infotainment system.

1.1 Applicable Car Models

  • Volvo XC90
  • Volvo XC60
  • Volvo XC40
  • Volvo S90
  • Volvo S60

The module supports non-destructive installation, meaning no replacement of original cables is needed. It supports both wireless and wired full-screen CarPlay and Android Auto, and adds Hicar connection for a smoother driving experience. The upgrade version does not support mirror link or USB flash play for video apps. CarPlay and Android Auto can only use apps that support their respective platforms.

Note on Android Auto Display Quality:

The same module is used for CarPlay and Android Auto, but there are differences in pixel quality. This is because CarPlay and Android Auto have different inherent formats. While we enable full-screen display for Android Auto, its resolution may be lower than CarPlay, a parameter determined by Google developers. CarPlay, designed by Apple, supports full-screen resolutions, resulting in better display quality. If Android Auto's display quality is a significant concern, please consider this before purchase.

2. Package Contents

Please verify that all items listed below are included in your package:

  • ISUDAR Auto Module (CP31NDCVO8818WGNV)
  • USB Cable & MIC Cable
  • Power Cable
  • LVDS Cable
  • WIFI Antenna
  • CAN Cable
ISUDAR Auto Module and included cables
ISUDAR Auto Module and included accessories.

3. Installation Guide

The installation process involves disassembling parts of your car's dashboard and connecting the module. It is recommended to seek professional installation if you are not comfortable with car electronics.

3.1 Wiring Diagram

Wiring diagram for ISUDAR module
Detailed wiring diagram for the ISUDAR module connections.

3.2 Step-by-Step Installation

  1. Remove Key Control Panel: Remove the Key control panel and its connector.
  2. Removing the key control panel
    Step 1: Removing the key control panel.
  3. Remove Air Conditioner Outlet: Remove the air conditioner outlet and the screws behind it.
  4. Removing the air conditioner outlet
    Step 2: Removing the air conditioner outlet.
  5. Remove Screen and Connectors: Carefully remove the car's screen and disconnect its connectors.
  6. Removing the car screen
    Step 3: Removing the car screen and its connectors.
  7. Connect Power Cable: Connect one end of the ISUDAR's gray power cable to the screen's power cable (unplugged from the car screen). Then connect the other end to the car screen.
  8. Connecting the ISUDAR power cable
    Step 4: Connecting the ISUDAR power cable.
  9. Connect LVDS Cable: Connect one end of the ISUDAR's LVDS cable to the screen's LVDS cable. The original LVDS cable is inserted into the car screen, and the ISUDAR LVDS cable connects to the original LVDS cable unplugged from the car screen.
  10. Connecting the LVDS cable
    Step 5: Connecting the LVDS cable.
  11. Plug Cables into Screen: Plug the ISUDAR's LVDS cable and gray power cable into the back of the screen.
  12. Plugging cables into the back of the screen
    Step 6: Plugging cables into the back of the screen.
  13. Find CAN Plug: Locate the CAN plug under the front passenger seat. CAN-L is PurpleGreen and CAN-H is PurpleWhite.
  14. Locating the CAN plug under the passenger seat
    Step 7: Locating the CAN plug under the front passenger seat.
    CAN-L and CAN-H wire identification
    CAN-L (PurpleGreen) and CAN-H (PurpleWhite) wire identification.
  15. Clamp CAN Cable: Use a vise to clamp the clip, ensuring the CAN cable is placed in the middle of the clip. A clicking sound indicates proper clamping.
  16. CAN cable in clip
    Step 8: CAN cable positioned in the clip.
    Clamping the CAN cable clip
    Clamping the CAN cable clip with a vise.

Important CAN Cable Notes:

  • The position of the CAN cable may vary by car model. If not found under the front passenger seat, check the door pedal area or the right foot door track.
  • If your car has manual seats, the CAN wire is not under the seat; you will need to find its connection elsewhere.
  • The new version changes to the CAN cable connection. If the CAN cable is not connected, the screen cannot display normally, and the box will not function.
  • The CAN cable at the original car OBD port may not contain the original rear-view camera data.

3.3 Installation Video

Video demonstrating the installation process and post-installation functionality.

4. Operating Instructions

4.1 Switching Between Systems

To switch between the Carplay system and the original car system:

  • One Key to Switch: Long press into the Carplay system, then click into the original system.
  • Touch Screen Control: The module supports touch screen control.
  • Steering Wheel Control: The module supports steering wheel control.
  • Panel Button Control: The module supports panel button control.
One key to switch between Carplay and original system
Visual guide for switching between Carplay and the original car system.

4.2 Wireless CarPlay Connection

Method 1: Initial Wired Connection

  1. Turn on your iPhone's Wi-Fi and Bluetooth.
  2. Connect your iPhone to the CarPlay module box via USB cable. The CarPlay icon will appear on the main menu of the screen, and it will automatically enter CarPlay.
  3. A prompt will appear on your iPhone; click 'Use CarPlay'.

Method 2: Wireless Connection via Bluetooth

  1. Enter the CarPlay module's main menu: Settings > Wireless Carplay Settings.
  2. Click 'discover and connect devices'.
  3. Turn on your mobile phone's Bluetooth and connect to the CarPlay module's Bluetooth (e.g., 'CX_BTFC4BBCEC58DA').
  4. After successful Bluetooth connection, a prompt will appear; click 'Use CarPlay'.
Apple CarPlay interface on Volvo screen
Apple CarPlay interface displayed on the Volvo screen.

4.3 Android Auto Connection

Wired Connection

  1. Download the Android Auto app on your Android phone.
  2. Click the 'Android Auto' icon on the module screen. A prompt 'Please connect your Android device' will appear.
  3. Plug your phone into the USB port. It will then automatically enter Android Auto.

Wireless Android Auto Connection

  1. Enter the CarPlay module's main menu: Settings > Wireless Android Auto Settings.
  2. Click 'Pairing'.
  3. Turn on your mobile phone's Bluetooth and connect to the CarPlay module's Bluetooth.
  4. After successful Bluetooth connection, a prompt will appear; click 'Allow'.
Android Auto interface on Volvo screen
Android Auto interface displayed on the Volvo screen.

4.4 HiCar Connection

The module supports HiCar connection for a smoother and more convenient driving experience.

HiCar interface on Volvo screen
HiCar interface displayed on the Volvo screen.

4.5 Button Operation

The module integrates with your car's existing controls:

  • Steering Wheel Controls: Use your steering wheel buttons for volume, track navigation, and other functions.
  • Panel Buttons: Utilize the car's panel buttons for control.
  • Siri Activation: Press and hold to wake up "Siri".
Steering wheel and panel button controls
Steering wheel and panel button controls for the module.

Note: For Siri, the buttons on our module controls cannot wake up Siri. You must press and hold the screen to activate Siri.

4.6 Additional Features

  • 5GHz WiFi: Built-in 5GHz WiFi for faster transmission speed and more stable CarPlay connection compared to 2.4G WiFi.
  • Bluetooth 5.0: Offers longer transmission distance, stronger compatibility, and a better user experience.
  • Original Audio & Phone: Connect your mobile phone to the original car Bluetooth to play sound through the original car audio for better sound quality.
  • Online APK Support: Supports various online applications.
  • Rear View Camera Support: Supports OEM Rear View Camera and 360 CAM control (note: only volume buttons are supported for control).
Features: 5GHz WiFi, Bluetooth 5.0, Original Audio Integration
Key features including 5GHz WiFi, Bluetooth 5.0, and original audio integration.
Rear view camera support
Rear view camera support with parking guidelines.

5. Maintenance

To ensure the longevity and optimal performance of your ISUDAR module:

  • Keep the module and connections dry and clean.
  • Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods.
  • Ensure all cables are securely connected to prevent intermittent issues.
  • Periodically check for firmware updates from ISUDAR to ensure compatibility and access to new features.

6. Troubleshooting (FAQ)

6.1 CarPlay Connection Issues

Q: After connecting wired CarPlay, waiting 10 seconds to unplug the mobile phone data cable, wireless CarPlay is not successfully connected.

A: 1) If the connection fails, plug in the data cable again. After entering wired CarPlay, wait 10 seconds, unplug the mobile phone, and wireless CarPlay should automatically reconnect.

A: 2) If wireless CarPlay still cannot be connected, unplug the phone, disconnect Bluetooth, and 'Ignore' the device. Reinsert the mobile phone data cable. The phone will prompt "Lock CarPlay" dialog box. Enable CarPlay Dialogue box, click OK and enable. Wait 10 seconds, unplug the phone, and you should successfully connect to wireless CarPlay.

Q: When the mobile phone is connected to wired CarPlay, the CarPlay page always shows loading, but the CarPlay interface cannot be entered.

A: Pull out the current mobile phone and plug it in again. After the mobile phone is successfully connected, it will automatically enter the CarPlay interface.

Q: The mobile phone and the car's Bluetooth have been connected, but cannot connect to WiFi CarPlay.

A: 1) From the main interface, go to Settings > WiFi CarPlay setting > Online device list. Click the corresponding "device name" to connect, and it should automatically enter CarPlay after a successful connection.

A: 2) Turn off WiFi and Bluetooth on the mobile phone, then turn them back on. After ignoring any previous Bluetooth connections, restart the Bluetooth connection. Once the Bluetooth connection is successful, the phone will pop up "Enable CarPlay?". Click "Enable" and wait for the connection to succeed. It will automatically enter the CarPlay page.

6.2 Android Auto Connection Issues

Q: When wireless CarPlay is manually connected for the first time, Bluetooth/WIFI on the mobile phone is turned on, Bluetooth shows connection status, and the car side shows connection to CarPlay, but the connection cannot be successful.

A: 1) Exit the "Discover and Connect Devices" interface, click on the "Online Device List", and click on the corresponding mobile phone connection to successfully connect to CarPlay.

A: 2) On the Bluetooth interface of the mobile phone, click Disconnect and reconnect. After the Bluetooth connection is successful, the mobile phone will receive the "Use Wireless CarPlay" dialog box. After clicking "Enable Wireless CarPlay", after a while, wireless CarPlay will automatically enter.

6.3 Performance Issues

Q: When CarPlay is playing music, the page freezes.

A: 1) Check whether the WIFI antenna of the machine is well connected.

A: 2) Place the mobile phone closer to the WIFI antenna.

A: 3) If the WIFI antenna is installed on a metal surface, please install the WIFI antenna away from the metal surface.

A: 4) Check whether the SMMI signal of the mobile phone is good.

Q: When the mobile phone and the car have not been connected to Bluetooth.

A: 1) On the mobile phone, click to turn off Bluetooth and turn it on again, ignore the Bluetooth, and reconnect. The connection should be successful.

A: 2) Enter "General" on the phone → click "Restore" → click "Restore Network Settings". After the phone restarts, enter the Bluetooth settings to reconnect. The connection should be successful.

Q: Why is the OEM page black screen after connection and unable to switch to the CarPlay module page?

A: 1) Check whether the box light flashes at a constant speed. If not, the CAN cable is not connected properly.

A: 2) The new version changes to the CAN cable connection. If the CAN cable is not connected, the OEM cannot display normally and the box cannot work.

Q: After connecting the device, the car is turned off and locked, but the screen keeps restarting.

A: Please contact ISUDAR staff and send your order number and module version information. We will send you the corresponding upgrade file to solve the problem.

7. Specifications

FeatureDetail
Brand NameISUDAR
Model NumberCP31NDCVO8818WGNV
OriginMainland China
Wireless Connectivity5GHz WiFi, Bluetooth 5.0
Supported SystemsWireless/Wired CarPlay, Wireless/Wired Android Auto, HiCar
Control MethodsSteering wheel, Panel buttons, Touch screen
Rear View Camera SupportOEM Rear View Camera, 360 CAM (volume buttons only)
Package Dimensions (L x W x H)21 cm x 14 cm x 11 cm
Package Weight0.95 kg
Processing Time3 days

8. Warranty & Support

The ISUDAR Wireless Carplay & Android Auto AI Upgrade Adapter comes with a one-year warranty. For any technical assistance, troubleshooting beyond this manual, or warranty claims, please contact ISUDAR customer support.

You can find additional resources and the full user manual in PDF format here: User Manual (PDF)

When contacting support, please provide your order number and module version information for faster service.

9. User Tips

  • Installation Time: With good preparation, installation can take around 45 minutes.
  • CAN Cable Routing: Routing the CAN cables, especially under the seat, can be challenging. Be prepared to maneuver in tight spaces.
  • Android Auto Clarity: Android Auto's display may not be as sharp as CarPlay. This is a known characteristic due to inherent format differences.
  • Siri Button: The Siri button on the steering wheel may not function with the module. Siri can typically be activated by pressing and holding the screen.
  • Manual Seats: If your car has manual seats, the CAN wire location might differ from the standard position under the passenger seat.

© 2023 ISUDAR. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.