1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your BESDER H.265 AI 4K Output CCTV Network Video Recorder (NVR). The NVR supports 4K HD resolution, H.265+ video compression, AI-powered face detection, ONVIF protocol compatibility, and 24/7 recording capabilities. Please read this manual thoroughly before using the device to ensure proper setup and functionality.
2. Safety Information
- Ensure the NVR is placed on a stable, flat surface to prevent accidental falls.
- Do not expose the NVR to water, moisture, or extreme temperatures.
- Use only the provided DC12V power adapter to avoid damage.
- Keep ventilation openings clear to prevent overheating.
- Do not attempt to open or repair the NVR yourself. Refer to qualified personnel for service.
- Disconnect power before performing any maintenance or installation.
3. Package Contents
Verify that all items listed below are included in your package:
- 1 x 9CH/16CH/32CH H.265 NVR (depending on your selection)
- 1 x USB Mouse
- 1 x DC12V Power Adapter for NVR
- 1 x User's Manual

4. Product Overview
The BESDER NVR is a compact and powerful device designed for comprehensive video surveillance. It features a sleek black casing with front panel indicators and a USB port for mouse connection. The rear panel provides all necessary connectivity options.
4.1. Physical Dimensions
The NVR unit measures approximately 13cm (Length) x 10.5cm (Width) x 4.5cm (Height).
4.2. Port Details

Front Panel:
- IR: Infrared receiver for remote control.
- QUAD: Button for switching display modes.
- ESC: Escape button for menu navigation.
- MENU: Accesses the main menu.
- SELECT: Confirms selections.
- USB MOUSE: Port for connecting the USB mouse.
Rear Panel:
- A-OUT: Audio output port.
- VGA: Video Graphics Array output for monitors.
- HD-port (HDMI): High-Definition Multimedia Interface output for monitors/TVs, supporting up to 4K resolution.
- LAN: RJ45 10M/100M Adaptive Ethernet port for network connection.
- DC 12V: Power input port.
5. Setup
5.1. Physical Connection
Follow these steps to connect your NVR:
- Connect a monitor or TV to the NVR using either the VGA or HDMI port. For 4K output, use the HDMI port.
- Connect the NVR to your network router using an Ethernet cable plugged into the LAN port.
- Connect the USB mouse to the USB MOUSE port on the front panel.
- Connect the DC12V power adapter to the NVR's power input and then plug it into a power outlet.

5.2. Hard Drive (HDD) Installation (Optional)
The NVR supports one 3.5-inch SATA hard drive, up to 14TB capacity, for local video storage. The HDD is optional and may not be included with your purchase.


5.3. Initial Configuration
Upon first boot, you may need to configure basic settings:
- Language Selection: Navigate to the 'System' menu, then 'General'. Select your preferred language from the dropdown list. The NVR supports over 20 languages including English, Chinese, Russian, Portuguese, French, German, Polish, Dutch, Hungarian, Turkish, Japanese, Romanian, and Indonesian.
- Date and Time: Set the correct time zone, system time, date format, and time format (12-hour or 24-hour).
- IP Channel Setup: In the 'Channel Set' menu, select 'Record Mode' to access IP channel settings. Use the 'Search' function to find available IP cameras on your network. Add them to the NVR. Ensure correct username and password for each camera.

5.4. ONVIF Compatibility
The NVR supports ONVIF 2.0 protocol, allowing compatibility with various ONVIF-compliant IP cameras. This enables multiple devices to connect and communicate within the surveillance system.

6. Operating Instructions
6.1. Main Menu Navigation
Right-click on the live view screen to access the main menu. Use the USB mouse to navigate through options such as PlayBack, Record Conf., Network, Date Time, System, Alarm, and Advanced.

6.2. Recording Configuration
The NVR supports multiple recording modes:
- Schedule: Continuous recording based on a set timetable.
- Manual: Start/stop recording manually.
- Detect: Records only when motion is detected.
- Alarm: Records when an alarm event is triggered.
To configure recording, go to the 'Record Conf.' menu. You can set the channel, length of recording, and select desired modes (Regular, Detect, Alarm) for specific time periods.
6.3. Playback
To review recorded footage, select 'PlayBack' from the main menu. You can choose from Common PlayBack, Sync PlayBack, Dayparting, Smart Express, Smart Search, or Face Search. Use the calendar to select the date for playback.
6.4. Face Detection
The NVR features new AI technology for face detection. This function requires compatible IP cameras (recommended to use BESDER cameras for full functionality). When enabled, the NVR can detect and record faces, providing detailed logs.


6.5. Motion Detection
Configure motion detection to trigger recording or alerts when movement is detected in specified areas. You can set sensitivity levels and define custom detection zones.


6.6. Remote Viewing
Access your NVR remotely using mobile apps or VMS software:
- Mobile Apps: Download 'XMeye' or 'iCSee' from the App Store (iOS) or Google Play (Android). Follow the in-app instructions for P2P connection.
- VMS Software: Install the VMS software on your Windows or Mac computer. Scan the provided QR codes for download. The default username is 'admin' and password is 'admin'.




6.7. PTZ Control
If you have PTZ (Pan-Tilt-Zoom) cameras connected, you can control them through the NVR interface. Access the PTZ Control menu to adjust speed, zoom, and set presets.
7. Maintenance
Regular maintenance ensures optimal performance and longevity of your NVR system.
- HDD Management: Periodically check the HDD status in the 'Advanced' > 'HDD Info' menu. Ensure sufficient storage space and consider enabling 'Overwrite' for continuous recording.
- Firmware Upgrade: Check for firmware updates in the 'Advanced' > 'Upgrade' menu to ensure your NVR has the latest features and security patches.
- Auto Maintain: Configure automatic maintenance tasks via the 'Advanced' > 'AutoMaintain' option.
- Backup/Restore: Regularly back up important configurations and recordings. Use the 'Backup' and 'Restore' options in the 'Advanced' menu.
- System Logs: Review system logs ('Advanced' > 'LOG') for any errors or unusual activity.
8. Troubleshooting
If you encounter issues with your NVR, refer to the following common problems and solutions:
- NVR not working/recording:
Check if the power adapter is securely connected and the NVR is powered on. Verify that an HDD is installed and properly formatted. Review recording schedules and motion detection settings to ensure they are configured correctly. - No picture from cameras on tracking screen, but IPC tab works (VMS):
This indicates a display or channel type issue. In the NVR's 'Advanced' > 'Digital' menu, check the 'ChannelType' settings. Ensure the maximum number of preview channels is set appropriately (e.g., 8, 9, 16, or 32 depending on your NVR model and desired output). - Cameras not connecting or showing 'ng username or passw':
Verify the IP address, port, username, and password for each camera in the NVR's IP Channel settings. Ensure the cameras are powered on and connected to the same network as the NVR. - Remote viewing issues:
Ensure the NVR is connected to the internet. Check network settings (IP Mode, DNS). Verify that the mobile app or VMS software is correctly configured with the NVR's details. - Poor video quality:
Ensure your cameras are capable of the desired resolution (e.g., 4K). Check the NVR's display output settings and the monitor's capabilities.
9. Specifications
| Feature | Specification |
|---|---|
| Brand Name | BESDER |
| Model Number | 6132NVR |
| Technology | Network |
| Video Resolution | 5 MP (Max 4K output) |
| Video Standard | PAL |
| Compression Format | H.265 |
| Audio Compression Format | G711A |
| Audio Input | 1 RCA |
| Video Input Interface | RJ45 |
| Network Interface | RJ45 10/100M |
| Communication Interface | RS-485 |
| IP Mode | Dynamic IP address |
| Network Protocol | TCP/IP, DDNS, DNS |
| e-Cloud (P2P) | Yes (XMEye App or www.xmeye.net) |
| Supported Mobile Systems | Android |
| Supported Operating Systems | Microsoft Windows XP |
| Hard Drive Size | 3.5'' |
| Hard drive Interface Type | SATA |
| SATA Port | 1 Port (Max 6TB, note: product description states up to 14TB) |
| Backup Type | Hard Drive |
| Alarm Type | FTP Photo |
| Onvif | Yes, onvif 2.0 |
| Main Processor | Hi3536A for 4CH / 8CH (Note: also Hi3536E for 16CH, Hi3536C for 32CH) |
| Housing Case | Metal |
| Power Supply | DC 12V 2A |
| Channel | 9CH/16CH/32CH Optional |
| Face Detection | Support |
| Access bandwidth | 300Mbps (Note: also 60Mbps for 9CH, 72Mbps for 16CH, 240Mbps for 32CH) |
| Work environment | Temperature: 0℃ – 55℃, Humidity: 10% – 90%RH, Atm: 86kpa – 106kpa |
10. User Tips
- Camera Connectivity: If you experience issues with cameras not displaying, especially if they work in the IPC tab but not on the main tracking screen, check the 'ChannelType' settings under the 'Digital' menu in 'Advanced' settings. Ensure the maximum number of preview channels is correctly configured for your setup (e.g., 8, 9, 16, or 32).
- Recording Issues: If the device is not recording, verify that a hard drive is installed and properly initialized. Check the recording schedule and motion detection settings to ensure they are active for the desired channels and times.
- ONVIF Compatibility: While the NVR supports ONVIF, full feature compatibility with all third-party ONVIF cameras is not guaranteed. For optimal performance and access to all features like face detection, using BESDER brand cameras is recommended.
- Password Management: Always ensure you use the correct username and password when adding IP cameras to the NVR. Incorrect credentials will prevent cameras from connecting.
- H.265+ Compression: Utilize the advanced H.265+ video compression to maximize your storage efficiency, saving approximately 70% of the bit rate compared to H.264 without compromising quality.
11. Warranty & Support
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your retailer or the manufacturer's customer support. Keep your purchase receipt and product serial number handy for faster service.