VASTFIRE 502B IR 850nm/940nm Flashlight

Contents

Vastfire 502B IR850nm/940nm LED Flashlight

Instruction Manual

Model: 502B IR 850nm/940nm Flashlight | Brand: VASTFIRE

1. Introduction

The Vastfire 502B IR LED Flashlight is a high-performance infrared illuminator designed to enhance the capabilities of night vision equipment. It emits infrared light at either 850nm or 940nm wavelengths, invisible or barely visible to the naked eye, but highly effective for illuminating targets when used with compatible night vision devices. This manual provides essential information for the safe and effective use of your IR illuminator.

Important Note: This is an infrared illuminator, not a standard visible light flashlight. It requires professional night vision equipment (such as night vision monoculars, scopes, or cameras) to see its illumination.

2. Safety Information

  • Eye Safety: Do not look directly into the IR LED beam, even though it may appear dim or invisible. Infrared radiation can be harmful to the eyes.
  • Battery Safety: Use only recommended 18650 batteries. Ensure correct polarity when inserting batteries. Do not mix old and new batteries, or different types of batteries. Do not expose batteries to extreme heat or dispose of them in fire.
  • Heat: The flashlight may become warm during prolonged use. This is normal.
  • Children: Keep out of reach of children.

3. Package Contents

Depending on your purchase, your package may include:

  • Package A:
    • 1x Vastfire 502B IR 850nm/940nm Flashlight
  • Package B:
    • 1x Vastfire 502B IR 850nm/940nm Flashlight
    • 1x USB Charger
    • 1x 18650 Battery
Vastfire 502B IR Flashlight kit with battery, charger, and case, demonstrating its use for night hunting.
Figure 1: Typical contents of the Vastfire 502B IR Flashlight kit, including the flashlight, battery, charger, and protective case, shown in a night hunting application.

4. Specifications

FeatureSpecification
Model Number502B IR 850nm/940nm Flashlight
LED TypeIR 850nm / IR 940nm
Lens31 mm glass aspheric convex Lens
Lighting Distance50 M - 200 M (with night vision equipment)
LED LifeMore than 100,000 hours
Input Voltage3.7-4.2 V
Power Source1 x 18650 battery
Wattage10W
Length13 cm (5.1 inches)
Body Diameter25.4 mm (1 inch)
Tail Diameter30 mm
Weight124 g (Without Battery)
Body MaterialAluminum alloy
WaterproofYes (Proof from rain and splash water)
Focal LengthNon-adjustable
ZoomNo
Support DimmerSingle File (Single mode operation)
CertificationCCC, CE, ROHS
Dimensions of the Vastfire 502B IR Flashlight: 13.2 cm length, 2.5 cm head diameter, 3.1 cm tail diameter.
Figure 2: Physical dimensions of the Vastfire 502B IR Flashlight.

5. Setup

5.1 Battery Installation

  1. Unscrew the tail cap of the flashlight.
  2. Insert one 18650 battery into the flashlight body with the positive (+) end facing towards the head of the flashlight.
  3. Screw the tail cap back on securely.
Exploded diagram of the Vastfire 502B IR Flashlight, detailing components such as the spring contact, attack head (protection mirror), tail cover, anti-skid design, stainless steel clip, logo, spiral body, and power button.
Figure 3: Exploded view of the flashlight components, showing the battery compartment and power button assembly.

5.2 Battery Charging (If included)

If your package includes a USB charger and 18650 battery:

  1. Insert the 18650 battery into the USB charger, ensuring correct polarity.
  2. Connect the USB charger to a compatible USB power source (e.g., computer, wall adapter).
  3. The charger's indicator light will show charging status (typically red for charging, green for fully charged).

5.3 Mounting

The flashlight features a 1-inch (25.4 mm) body diameter, making it compatible with standard 1-inch scope rings and mounts for attachment to firearms or other equipment. Ensure the mount is securely fastened.

6. Operation

6.1 Power On/Off

Press the power button located on the tail cap to turn the flashlight ON or OFF. This model operates in a single mode (on/off) without adjustable brightness levels.

6.2 Using with Night Vision Equipment

The Vastfire 502B is an infrared illuminator. Its light is not visible to the naked eye (or only faintly visible for 850nm). To utilize its full potential, you must use it in conjunction with a night vision device. Point the illuminator towards your target while viewing through your night vision equipment to see the enhanced illumination.

Night vision performance comparison of the IR illuminator at 2 meters, 40 meters, 60 meters, and 90 meters, showing enhanced visibility with a night vision device.
Figure 4: Demonstration of the IR illuminator's effectiveness with a night vision device at various distances.

6.3 850nm vs. 940nm IR LEDs

  • 850nm IR: Provides stronger illumination and longer range. It produces a faint, visible red glow from the LED emitter, which can be detected by some animals or individuals.
  • 940nm IR: Offers a completely covert operation as its light is almost entirely invisible to the naked eye. The trade-off is slightly reduced illumination range compared to 850nm.
Visual comparison of IR850nm and IR940nm LEDs: IR850nm shows a faint red glow, while IR940nm is nearly invisible to the naked eye.
Figure 5: Comparison of the visible light emitted by 850nm and 940nm IR LEDs.

7. Maintenance

7.1 Cleaning

  • Wipe the flashlight body with a soft, damp cloth.
  • For the lens, use a lens cleaning cloth and solution to avoid scratches.
  • Do not use abrasive cleaners or solvents.

7.2 Battery Care and Storage

  • Remove the battery if the flashlight will not be used for an extended period to prevent leakage.
  • Store batteries in a cool, dry place.
  • Rechargeable batteries should be charged regularly, even if not in use, to maintain their lifespan.

7.3 Waterproofing

The flashlight is designed to be waterproof against rain and splashes. However, it is not intended for submersion. Ensure all caps and seals are tightly closed before exposure to moisture.

The Vastfire 502B IR Flashlight demonstrating its waterproof capabilities under splashing water.
Figure 6: The flashlight's waterproof design protects against rain and splashes.

8. Troubleshooting

ProblemPossible CauseSolution
Flashlight does not turn on.1. Battery inserted incorrectly.
2. Battery is dead or low.
3. Loose connections.
1. Check battery polarity.
2. Replace or recharge the battery.
3. Ensure tail cap is fully tightened.
Poor or no illumination through night vision device.1. Not using a night vision device.
2. Night vision device is incompatible or malfunctioning.
3. Battery is low.
1. Confirm you are using a night vision device.
2. Check your night vision device's functionality and compatibility with IR illuminators.
3. Replace or recharge the battery.
Flashlight gets hot quickly.Normal operation for high-power LEDs.Reduce continuous usage time if discomfort occurs. Ensure adequate ventilation.

9. User Tips

  • Always pair this IR illuminator with appropriate night vision equipment for optimal performance. It is not a standalone visible light source.
  • The 502B model features a fixed, focused beam and does not have an adjustable zoom function or multiple brightness modes. It operates as a single-mode (on/off) device.
  • Consider the 850nm version for maximum range and brightness, or the 940nm version for maximum stealth, depending on your application.
  • Keep spare charged 18650 batteries on hand for extended use, especially during night hunting or surveillance.

10. Warranty and Support

For any issues or questions regarding your Vastfire 502B IR Flashlight, please contact the seller or manufacturer's customer support. Keep your purchase receipt as proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.