GL.iNet GL-S10

Contents

GL-S10 BLE IoT Gateway User Manual

Model: GL-S10

1. Introduction

The GL-S10 is a cost-effective IoT gateway designed for mass device deployment with low power consumption. It features a compact design, easy installation, and supports both Bluetooth Low Energy (BLE) and Wi-Fi connectivity. This gateway is ideal for transmitting BLE broadcast data to the cloud, making it suitable for applications such as indoor positioning, navigation, inventory management, and industrial sensor data collection.

The GL-S10 is available in two versions: one with GL Standard firmware and another configured with ESPHome firmware. Please ensure you refer to the relevant sections for your specific device version.

2. Package Contents

Please check the box for the following items:

  • GL-S10 Gateway
  • 1 x BLE Beacon (Optional accessory)
  • 1 x USB Cable
  • 1 x External Antenna
  • 1 x User Manual (this document)

3. Hardware Overview

The GL-S10 features a compact design with essential ports, indicators, and controls.

Side view of GL-S10 showing WAN and Power ports
Figure 1: GL-S10 Side View (WAN and Power Ports)
Top view of GL-S10 showing BLE and Power LEDs
Figure 2: GL-S10 Top View (LED Indicators)
Detailed GL-S10 Pinout Diagram
Figure 3: GL-S10 Pinout Diagram

3.1 Ports and Buttons

  • WAN Port: 1 x 10/100Mbps Ethernet port for network connectivity.
  • Micro USB Power Port: For 5V/1A DC power input.
  • PoE Power Input: Supports 802.3at/af standard Power over Ethernet.
  • Reset Button: Used to enter configuration mode, restore factory settings, or initiate an OTA firmware upgrade.
  • Wi-Fi & BLE Antenna Connector: For connecting the external 2.4GHz antenna.

3.2 LED Indicators

  • Power LED: Indicates the power status of the device.
  • BLE LED: Indicates the status of the Bluetooth Low Energy module.
  • Network LED: Indicates network activity and connection status.

4. Initial Setup

4.1 Powering On the Device

  1. Attach the external antenna to the Wi-Fi & BLE Antenna Connector.
  2. Connect the GL-S10 to a power source using one of the following methods:
    • Micro USB: Plug the provided USB cable into the Micro USB Power Port and connect it to a 5V/1A power adapter.
    • PoE: Connect an Ethernet cable from a PoE-enabled switch or injector to the WAN port.

    WARNING: Do NOT plug in both the PoE power supply and the 5V Micro USB power supply simultaneously, as this may cause damage to the device.

  3. The Power LED will illuminate, indicating the device is powered on.

4.2 Network Connection

The GL-S10 can connect to the internet via Wi-Fi or Ethernet WAN.

GL-S10 connected to a router via Ethernet
Figure 4: GL-S10 Connected to a Network
  • Ethernet WAN: Connect an Ethernet cable from your main router or network switch to the WAN port of the GL-S10.
  • Wi-Fi (GL Standard Firmware): The device can operate as a Wi-Fi station to connect to an existing Wi-Fi network. This configuration is typically done via the GL-S10 Tool App.
  • Wi-Fi (ESPHome Firmware): Note that the ESPHome version of the GL-S10 does NOT support Wi-Fi connections for network uplink. It relies solely on the Ethernet WAN port for internet connectivity.

4.3 App Installation (GL Standard Firmware)

For GL Standard firmware, download and install the GL-S10 Tool App on your smartphone. This app is used for initial configuration, network settings, and filtering BLE beacons.

  1. Search for "GL-S10 Tool App" on the Apple App Store or Google Play Store.
  2. Download and install the application.
  3. Ensure Bluetooth is enabled on your phone. (For Android users, also enable GPS for Bluetooth functionality).
  4. Follow the in-app instructions to discover and configure your GL-S10 gateway.
Screenshot of the GL-S10 Tool App interface
Figure 5: GL-S10 Tool App Interface

5. Operating Instructions

The GL-S10 acts as a bridge between BLE devices and cloud servers, transmitting data efficiently.

Conceptual diagram of GL-S10 data flow
Figure 6: GL-S10 Data Flow Diagram

5.1 BLE Data Transmission

The GL-S10 receives BLE broadcast data from nearby devices. It supports GAP and GATT certification, allowing it to function as either a Master or Slave device to connect and communicate with other BLE devices. The BLE communication distance is up to 80 meters in an open, non-interference environment.

5.2 MQTT Client Functionality

The gateway has a built-in standard MQTT client that connects to any standard MQTT server. It forwards incoming BLE messages to the cloud server, enabling seamless integration with IoT platforms.

5.3 Configuration with GL-S10 Tool App (GL Standard Firmware)

Use the GL-S10 Tool App to:

  • Configure Wi-Fi network settings (if using Wi-Fi uplink).
  • Set up MQTT server details.
  • Manage OTA firmware upgrades.
  • Define rules for filtering BLE beacons based on MAC address, complete local name, RSSI, or manufacturer-specific data.

5.4 ESPHome Firmware Version

The GL-S10 with ESPHome firmware is designed for home automation, integrating Bluetooth devices like smart bulbs, switches, and sensors into smart home systems via the ESPHome platform. It allows remote control of home automation devices via mobile apps or voice assistants.

GL-S10 in a home automation setting
Figure 7: GL-S10 in Home Automation

Key features of the ESPHome version:

  • ESP32-D0WD Chipset: Integrates 2.4GHz Wi-Fi and BLE for high RF performance and low power consumption.
  • Ethernet with PoE Support: Simplifies cabling by providing both data and power through a single Ethernet cable.
  • Expandability: I2C ports are preconfigured on the PCB (CLK and DAT pin holes) for connecting additional sensors and devices.

6. Maintenance

6.1 Cleaning

Wipe the device with a soft, dry cloth. Do not use liquid cleaners or aerosol sprays.

6.2 Firmware Upgrades

Firmware upgrades can be performed Over-The-Air (OTA) via the GL-S10 Tool App (for GL Standard firmware) or through specific ESPHome tools for the ESPHome version. Regularly check for updates to ensure optimal performance and security.

7. Troubleshooting

7.1 Device Not Powering On

  • Ensure the power adapter (5V/1A) or PoE source is correctly connected and functional.
  • Verify that only one power source (USB or PoE) is connected at a time.

7.2 No Network Connectivity

  • Ethernet: Check the Ethernet cable connection to the WAN port and your router/switch. Ensure the Network LED is active.
  • Wi-Fi (GL Standard Firmware): Confirm Wi-Fi settings in the GL-S10 Tool App are correct and the device is within range of your Wi-Fi network.
  • Wi-Fi (ESPHome Firmware): Remember that the ESPHome version does NOT support Wi-Fi for network uplink. Ensure an Ethernet connection is used.

7.3 BLE Devices Not Detected

  • Ensure the BLE LED on the GL-S10 is active.
  • Verify that BLE is enabled on the devices you are trying to detect.
  • Check the range; the effective range is up to 80 meters in open, non-interference environments. Obstacles can reduce this range.
  • Review BLE filtering rules in the GL-S10 Tool App (if applicable) to ensure desired devices are not being filtered out.

7.4 Resetting the Device

The Reset Button can be used for various functions:

  • Enter Configuration Mode: Press and hold the Reset Button for a short period during startup.
  • Restore Factory Settings: Press and hold the Reset Button for approximately 10 seconds until the LEDs flash, then release. This will erase all configurations.
  • Initiate OTA Upgrade: Specific button press sequences may be required, refer to the GL.iNet documentation or app for details.

8. User Tips

  • Customizing ESPHome Firmware: For advanced users, the ESPHome firmware can be updated and customized using the ESPHome builder addon in Home-Assistant. This allows for tailored functionality and integration with your smart home ecosystem.
  • Optional BLE Beacon: If you have the optional BLE Beacon accessory, it broadcasts BLE signals at 300ms intervals and features an adhesive surface for easy installation in various locations.
  • Power Safety: Always ensure you are using only one power input method (either Micro USB or PoE) to prevent potential damage to your GL-S10 device.

9. Specifications

FeatureDetail
CPUESP32-D0WD, Dual-core Xtensa® 32-bit LX6 microprocessor, @240MHz
Memory / StorageSRAM 520KB + PSRAM 8MB / NOR Flash 4MB
Wi-Fi802.11 b/g/n, 150Mbps (2.4GHz)
BLE ModuleBT V4.2
External Antenna1 x 2.4GHz Wi-Fi and BLE combined (SMA external antenna)
Ethernet Speed1 x 10/100Mbps WAN port
Power InputMicro USB, 5V/1A or PoE Power Input (802.3at/af standard)
Power ConsumptionNormal: <0.5W, Full capacity: <1.5W
Dimension / Weight57 x 57 x 25mm (L*W*H) / 53.6g
Operating Temperature0 ~ 40°C (32 ~ 104°F)
Storage Temperature-20 ~ 70°C (-4 ~ 158°F)
Operating Humidity5%~95%, non-condensing
Storage Humidity5%~95%, non-condensing
Communication ProtocolMQTT / HTTP
Encryption ProtocolTLS1.0/1.1/1.2
Encryption ModeOPEN/WEP/WPA_PSK/WPA2_PSK/WPA_WPA2_PSK
FunctionsFirewall, OTA, Local Serial Port

10. Warranty and Support

The GL-S10 BLE IoT Gateway comes with a 2-year warranty.

For technical support, product inquiries, or warranty claims, please contact GL Technologies (Hong Kong) Limited directly:

11. Certifications

The GL-S10 BLE IoT Gateway is certified with the following standards:

  • CE
  • FCC
  • RoHS
  • WEEE

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.