Taidacent 80mm Remote 5V Wireless LED and Coil Module

Contents

Taidacent 80mm Remote 5V Wireless LED and Coil Inductive Charging Module

User Manual

1. Introduction

This manual provides instructions for the Taidacent 80mm Remote 5V Wireless LED and Coil Inductive Charging Module. This module is designed for wireless power transmission, allowing LEDs to light up without direct electrical contact, ideal for educational projects, decorative lighting, or small-scale wireless power applications.

2. Safety Information

  • Ensure the input voltage does not exceed 5V to prevent damage to the module.
  • Avoid contact with water or other liquids.
  • Do not attempt to modify the module components.
  • Keep out of reach of children.
  • Handle the coil and circuit board with care to avoid bending or breaking connections.

3. Package Contents

Please verify that all items are present in your package:

  • 1x Transmitter Coil (80mm diameter) with control board
  • 10x Mixed Color Receiver LEDs
Overview of the wireless power module components, including the transmitter coil, control board, and individual receiver LEDs.
Figure 1: Components of the Wireless LED and Coil Module.

4. Specifications

Feature Specification
Transmitter Input Voltage 5 V
Transmitter Coil Outer Diameter 70 mm
Transmitter Coil Inner Diameter 65 mm
Transmitter Coil Thickness 0.5 mm
Launch Board Size (L x W x T) 16 mm x 12 mm x 2.5 mm
Receiver Lamp Outer Diameter 4.3 mm
Induction Distance 0 ~ 80 mm
Accessory Type Charger Accessories
Charger Included No
Battery Included No
Origin Mainland China

5. Setup

  1. Connect Power: Connect the red wire of the transmitter module to a 5V positive (+) power source and the black wire to the negative (-) terminal. Ensure a stable 5V DC power supply is used.
  2. Position Receiver LEDs: Place the individual receiver LEDs within the induction range (0-80mm) of the transmitter coil. The LEDs do not require direct connection to the power source; they will light up wirelessly.
Diagram showing the wireless power module connected to a 5V power source, with the transmitter coil and receiver LEDs.
Figure 2: Transmitter module connected to a 5V power source.

6. Operating Instructions

Once the transmitter module is powered on with a 5V supply, it generates an electromagnetic field. When the receiver LEDs are brought into this field, they will inductively draw power and illuminate. The brightness of the LEDs may vary depending on their distance from the transmitter coil and their orientation.

Example of the receiver LEDs illuminated by the inductive field from the transmitter coil.
Figure 3: Receiver LEDs illuminated by the inductive field.

7. Maintenance

  • Keep the module clean and free from dust. Use a soft, dry cloth for cleaning.
  • Store the module in a dry environment, away from extreme temperatures.
  • Avoid placing heavy objects on the coil or circuit board.

8. Troubleshooting

Problem: LEDs are not lighting up.
  • Check Power Supply: Ensure the 5V power supply is correctly connected to the transmitter module and is providing sufficient power.
  • Check Connections: Verify that the red and black wires are securely connected to the positive and negative terminals of the power supply, respectively.
  • Induction Distance: Make sure the receiver LEDs are within the specified induction distance (0-80mm) from the transmitter coil.
  • LED Orientation: While most inductive LEDs are omnidirectional, try slightly adjusting the orientation of the LEDs relative to the coil.
  • Damaged Components: Inspect the transmitter coil, control board, and LEDs for any visible damage.

9. User Tips

  • For best results, keep the receiver LEDs as close as possible to the transmitter coil.
  • Experiment with different arrangements of LEDs around the coil to achieve desired lighting effects.
  • Consider integrating this module into models or displays where hidden power sources are beneficial.

10. Warranty and Support

For any issues or questions regarding your Taidacent Wireless LED and Coil Inductive Charging Module, please contact the seller or manufacturer for support. Please retain your purchase receipt for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.