1. Product Overview
This document provides instructions for the Siemens Microwave Oven Thermometer, a critical component designed to monitor and regulate the internal temperature of your microwave oven. This part, also known as a thermal cut-out or temperature sensor, ensures safe operation by preventing overheating.
2. Setup and Installation
WARNING: Before attempting any installation or repair, ensure the microwave oven is completely unplugged from the power source to prevent electric shock.
This thermometer is a replacement part for specific Siemens microwave oven models. Installation typically involves accessing the internal components of the microwave. Due to the electrical nature and potential hazards, professional installation by a qualified technician is highly recommended.
2.1. Identifying Your Microwave Model
It is crucial to verify the model number of your microwave oven to ensure compatibility with this replacement part. The model number is usually located on a nameplate or sticker on the appliance, often found on the back, inside the door frame, or on the bottom.
2.2. Installation Steps (General Guidance)
The following steps are general guidelines. Always refer to your specific microwave oven's service manual for detailed instructions.
- Disconnect Power: Unplug the microwave oven from the wall outlet.
- Access Component: Carefully remove the outer casing or relevant panels to gain access to the existing thermometer/thermal cut-out. This may involve removing screws and clips.
- Locate Old Part: Identify the old thermometer. It will typically be mounted to a metal surface and have two electrical wires connected to it.
- Disconnect Wires: Carefully disconnect the electrical wires from the old thermometer. Note their orientation if necessary.
- Remove Old Part: Unscrew or unclip the old thermometer from its mounting location.
- Install New Part: Mount the new Siemens thermometer (models 607852 or 607964) in the same location, ensuring it is securely fastened.
- Connect Wires: Reconnect the electrical wires to the new thermometer's terminals.
- Reassemble: Reattach all panels and the outer casing.
- Test: Plug the microwave oven back into the power source and perform a test run to ensure proper operation.
3. Operating Principle
The Siemens Microwave Oven Thermometer (607852, 607964) functions as a safety device. It is a thermal cut-out that is normally closed (NC) or normally open (NO) depending on its design and application. Its primary role is to monitor the temperature within a specific area of the microwave, typically near the magnetron or cavity. If the temperature exceeds a predetermined safe limit, the thermometer will open (or close) its internal circuit, interrupting power to critical components and preventing damage from overheating. Once the temperature returns to a safe level, the circuit may reset automatically (auto-reset) or require manual resetting, depending on the specific design of the component and the microwave oven.
4. Maintenance
As an internal component, this thermometer requires minimal user maintenance. However, periodic inspection during other microwave service or cleaning can help ensure its longevity and proper function.
- Visual Inspection: If accessible, visually inspect the thermometer for any signs of physical damage, corrosion on terminals, or loose connections.
- Cleanliness: Ensure the area around the thermometer is free from dust, grease, or debris that could impede heat dissipation or cause electrical issues.
- Professional Check: If your microwave oven is undergoing professional servicing, request that the technician inspect the thermal cut-out as part of their routine check.
5. Troubleshooting
If your microwave oven exhibits symptoms related to temperature regulation, the thermometer could be a potential cause. Always ensure the microwave is unplugged before any inspection.
| Symptom | Possible Cause (Thermometer Related) | Action |
|---|---|---|
| Microwave not heating or no power | Faulty thermometer stuck in open circuit (tripped) state, preventing power flow. | Inspect the thermometer for continuity using a multimeter (for qualified technicians). If no continuity, replacement may be necessary. |
| Microwave overheating or running too hot | Faulty thermometer stuck in closed circuit state, failing to trip when overheating occurs. | Immediately discontinue use. This is a serious safety concern. The thermometer needs to be replaced by a qualified technician. |
| Intermittent operation | Loose wiring connection to the thermometer or an intermittently failing component. | Check all electrical connections to the thermometer for tightness and corrosion. |
For all troubleshooting steps, if you are not confident in performing electrical repairs, please consult a certified appliance technician.
6. Specifications
- Product Type: Microwave Oven Part (Thermometer / Thermal Cut-out)
- Brand: Siemens
- Model Numbers: 607852, 607964
- Origin: Germany (De(origin))
- Information on Spare Parts: С019 125
6.1. Package Dimensions
- Length: 8 cm
- Width: 7 cm
- Height: 7 cm
- Weight: 0.1 kg
6.2. Compatible Microwave Oven Models
This thermometer is compatible with a wide range of Siemens and Bosch microwave oven models. Please ensure your appliance's model number matches one of the following for proper fit and function:
HB84E562/01, HB84E562/02, HB84E562/03, HB84E562/04, HB84E562/35, HB84E562/36, HB84E562/37, HB84E562/39, HB84E562B/01, HB84E562B/02, HB84E562B/03, HB84E562B/04, HB84E562B/35, HB84E562B/36, HB84E562B/37, HB84E562B/38, HB84E562B/39, HB84E562S/01, HB84E562S/02, HB84E562S/04, HF25G560/02, HF25G560/03, HF25G560/04, HF25G561/02, HF25G561/03, HF25G561/04, HF25G5L2/01, HF25G5L2/02, HF25G5L2/03, HF25G5L2/04, HF25G5L2/05, HF25G5L2/06, HF25G5L2/07, HF25G5L2W/01, HF25G5L2W/02, HF25G5L2W/03, HF25G5L2W/04, HF25G5L2W/07, HF25G5R2/01, HF25G5R2/02, HF25G5R2/03, HF25G5R2/04, HF25G5R2/07, HF25M260/02, HF25M260/03, HF25M260/04, HF25M260B/01, HF25M260B/02, HF25M261/02, HF25M261/03, HF25M261/04, HF25M2L2/01, HF25M2L2/02, HF25M2R2/01, HF25M2R2/02, HF25M560/02, HF25M560/03, HF25M560/04, HF25M560B/02, HF25M560B/03, HF25M560B/04, HF25M560TI/01, HF25M560TI/02, HF25M561/01, HF25M561/02, HF25M561/03, HF25M561/04, HF25M5L2/01, HF25M5L2/02, HF25M5L2/03, HF25M5L2/04, HF25M5L2/05, HF25M5L2/07, HF25M5L2B/01, HF25M5L2B/02, HF25M5L2B/03, HF25M5L2B/07, HF25M5L2X/01, HF25M5L2X/03, HF25M5L2X/07, HF25M5R2/01, HF25M5R2/02, HF25M5R2/03, HF25M5R2/07, HF25M660/02, HF25M660/03, HF25M660/04, HF25M660B/01, HF25M660B/02, HF25M660B/03, HF25M660B/04, HF25M661/02, HF25M661/03, HF25M661/04, HF25M6L2/01, HF25M6L2/02, HF25M6L2B/01, HF25M6L2B/02, HF25M6R2/01, HF25M6R2/02, HF25M760/02, HF25M760/03, HF25M760/04, HF25M761/01, HF25M761/02, HF25M761/03, HF25M761/04, HF25G560/01, HF25G560TI/01, HF25G561/01, HF25M260/01, HF25M261/01, HF25M560/01, HF25M560B/01, HF25M660/01, HF25M661/01, HF25M760/01, C54L60N0/01, C54L60N0/02, C54L60N0/07, C54L60N0/08, C54L60N0GB/01, C54L60N0GB/02, C54L60N0GB/07, C54L60N0GB/08, C54L60N0RU/02, C54L60N0RU/07, C54L60N0RU/08, C54L60S0/01, C54L60S0/02, C54L60S0GB/01, C54L60S0GB/02, C54L60W0/01, C54L60W0/02, C54L70N0/01, C54L70N0/02, C54L70N0/03, C54L70N0/04, C54L70N0/07, C54L70N0GB/01, C54L70N0GB/02, C54L70N0GB/03, C54L70N0GB/04, C54L70N0GB/07, C54L70N0GB/08, C54L70N0RU/02, C54L70N0RU/04, C54L70N0RU/07, C54L70N0RU/08, C54R60N0/01, C54R60N0/02, C54R60N0/07, C54R60N0GB/01, C54R60N0GB/02, C54R60N0GB/07, C54R60S0GB/01, C54R60S0GB/02, C54R70N0/01, C54R70N0/02, C54R70N0/03, C54R70N0/04, C54R70N0/07, C54R70N0/08, C54R70N0GB/01, C54R70N0GB/02, C54R70N0GB/04, C54R70N0GB/07, C54R70N0GB/08, C57M70N0/01, C57M70N0/02, C57M70N0/03, C57M70N0/04, C57M70N0/35, C57M70N0/36, C57M70N0/37, C57M70N0/39, C57M70N0GB/01, C57M70N0GB/02, C57M70N0GB/03, C57M70N0GB/04, C57M70N0GB/35, C57M70N0GB/36, C57M70N0GB/37, C57M70N0GB/38, C57M70N0GB/39, C57M70N3/37, C57M70N3/39, C57M70N3GB/38, C57M70N3GB/39, C57M70S0GB/01, C57M70S0GB/02, C57M70S0GB/03, C57M70S0GB/04, C57M70S0GB/35, C57M70S0GB/36, C57M70S0GB/37, C57M70S0GB/38, C57M70S0GB/39, C57M70S3GB/38, C57M70S3GB/39, H5474A0/02, H5474A0/03, H5474A0/04, H5474N0/02, H5474N0/03, H5474N0/04, H5474N0GB/01, H5474N0GB/02, H5474N0GB/03, H5474N0GB/04, H5474S0/02, H5474S0/03, H5474S0/04, H5474S0GB/01, H5474S0GB/02, H5474S0GB/03, H5474S0GB/04, H5474W0/02, H5474W0/03, H5474W0/04, H5474W0GB/01, H5474W0GB/02, H5474W0GB/03, H5474W0GB/04, H54R4N0/01, H54R4N0/02, H54R4N0/03, H54R4N0/04, H5574N0/02, H5574N0/03, H5574N0/04, H5574N0GB/01, H5574N0GB/02, H5574N0GB/03, H5574N0GB/04, H5474A0/01, H5474N0/01, H5474S0/01, H5474W0/01, H5574N0/01.
7. User Tips
- Verify Compatibility: Always double-check your microwave oven's exact model number against the compatibility list before purchasing and installing any replacement part.
- Safety First: Prioritize safety by always disconnecting power to the appliance before beginning any inspection or repair work.
- Professional Assistance: If you lack experience with appliance repair or electrical work, it is strongly advised to seek assistance from a qualified service technician.
- Original Parts: Using genuine or manufacturer-recommended replacement parts ensures optimal performance and safety.
8. Warranty and Support
For specific warranty information regarding this Siemens Microwave Oven Thermometer (models 607852, 607964), please refer to the terms and conditions provided by your original seller or the manufacturer. Warranty coverage typically applies to manufacturing defects and may vary based on the point of purchase.
If you require technical support, have questions about installation, or need to inquire about warranty claims, please contact the seller from whom you purchased this product. They will be able to provide the most accurate and up-to-date information and assistance.
