Miboxer PR2, PR5 (FUT036P, FUT035P, FUT037P, FUT038P, FUT039P)

Contents

Miboxer High Current PR2 PR5 LED Controller Instruction Manual

Models: FUT036P, FUT035P, FUT037P, FUT038P, FUT039P

Brand: Miboxer (teopek)

1. Introduction

This manual provides detailed instructions for the Miboxer High Current Output LED Controllers, including models FUT036P (Single Color), FUT035P (Dual White), FUT037P (RGB), FUT038P (RGBW), and FUT039P (RGB+CCT). These controllers are designed for various LED strip light types, offering high current output and 2.4GHz RF remote control capabilities. They also support smartphone app and third-party voice control when paired with a compatible 2.4GHz gateway.

Overview of Miboxer LED Controllers and WL-Box1 Gateway
Figure 1: Miboxer LED Controllers: Single Color, Dual White, RGB, RGBW, RGB+CCT, and WL-Box1 Gateway

2. Safety Information

  • Ensure the input voltage (DC12~36V) matches the power supply and LED strip requirements.
  • Do not exceed the maximum total output current of 20A.
  • Operate within the specified working temperature range of -10~40℃.
  • Installation should be performed by qualified personnel to prevent electrical hazards.
  • Keep the device away from water, moisture, and high temperatures.

3. Product Overview

The Miboxer high current LED controllers are versatile devices designed to manage various types of LED strip lights. Each model is tailored for specific LED configurations:

  • FUT036P: Single Color LED Controller - For controlling the brightness of single-color LED strips.
  • FUT035P: Dual White LED Controller - For controlling brightness and color temperature (warm white to cool white) of dual white LED strips.
  • FUT037P: RGB LED Controller - For controlling color (16 million colors) and brightness of RGB LED strips.
  • FUT038P: RGBW LED Controller - For controlling color, brightness, and a dedicated white channel of RGBW LED strips.
  • FUT039P: RGB+CCT LED Controller - The most versatile, controlling color, brightness, and color temperature of RGB+CCT LED strips.

All controllers feature 2.4GHz RF wireless communication, allowing for remote control within a 30m range. They also support signal transmitting, extending the control distance limitlessly as long as controllers are within 30m of each other. Additionally, they are compatible with smartphone app and third-party voice control (e.g., Amazon Alexa, Google Assistant) when used with a Miboxer 2.4GHz gateway (e.g., WL-Box1/WL-Box2).

Detailed view of Miboxer LED Controller models
Figure 2: Detailed view of Miboxer LED Controller models

4. Specifications

FeatureSpecification
Brand NameMiboxer (teopek)
Model NumbersPR2, PR5 (FUT036P, FUT035P, FUT037P, FUT038P, FUT039P)
Item TypeRGB Controller (general classification)
Input VoltageDC12~36V
Output Current10A/Channel
Total OutputMax 20A
Max. Load Power240W
Power SourceDC
Control MethodWiFi RF
RF Frequency2.4GHz
Control Distance30m (remote to controller)
Working Temperature-10~40℃
MaterialABS
CertificationsCCC, ROHS, CE
Dimensions (L x W x H)119mm x 47mm x 22mm
Weight0.084 KGS (per piece)
Miboxer LED Controller Dimensions and Packaging
Figure 3: Miboxer LED Controller Dimensions and Packaging

5. Setup

5.1. Wiring Instructions

Connect your LED strip lights and power supply to the controller according to the specific model's wiring diagram. Ensure correct polarity (V+, V-) and channel connections (R, G, B, W, CW, WW).

Input Voltage and LED Light Interface Details
Figure 4: General Input Voltage (DC12V~36V) and LED Light Interface Details

FUT036P: Single Color LED Controller

Wiring Diagram for Single Color LED Controller (FUT036P)
Figure 5: Wiring Diagram for FUT036P (Input: V+, V-; Output: LED V+, LED V-; Additional: DIMMING, GND PUSH)

FUT035P: Dual White LED Controller

Wiring Diagram for Dual White LED Controller (FUT035P)
Figure 6: Wiring Diagram for FUT035P (Input: V+, V-; Output: V+, CW, WW; Additional: DIMMING, GND PUSH)

FUT037P: RGB LED Controller

Wiring Diagram for RGB LED Controller (FUT037P)
Figure 7: Wiring Diagram for FUT037P (Input: V+, V-; Output: V+, R, G, B; Additional: DIMMING, GND PUSH)

FUT038P: RGBW LED Controller

Wiring Diagram for RGBW LED Controller (FUT038P)
Figure 8: Wiring Diagram for FUT038P (Input: V+, V-; Output: V+, R, G, B, W; Additional: DIMMING, GND PUSH)

FUT039P: RGB+CCT LED Controller

Wiring Diagram for RGB+CCT LED Controller (FUT039P)
Figure 9: Wiring Diagram for FUT039P (Input: V+, V-; Output: V+, R, G, B, CW, WW; Additional: DIMMING, GND PUSH)

5.2. Remote Control Pairing & Signal Transmitting

To pair a remote control with your LED controller, refer to the specific remote's instructions. The controllers support a signal transmitting function: one controller can transmit signals from the remote to another controller within 30 meters. This allows for an extended, potentially limitless, control distance as long as there is another controller within 30 meters.

Signal Transmitting Function Diagram
Figure 10: Signal Transmitting Function Diagram illustrating extended control range

5.3. Smartphone App & Voice Control Setup

For smartphone app control and third-party voice control (e.g., Amazon Alexa, Google Assistant), a Miboxer 2.4GHz gateway (such as WL-Box1 or WL-Box2) is required. Connect the gateway to your home network and follow the instructions provided with the gateway to link it with your LED controllers and smart home platforms.

Miboxer 2.4GHz Gateway (WL-Box1)
Figure 11: Miboxer 2.4GHz Gateway (WL-Box1)
Smartphone App and Voice Control Setup with Gateway
Figure 12: Smartphone App and Voice Control Setup with Gateway, compatible with Amazon Alexa and Google Assistant

6. Operating Instructions

6.1. Remote Control Operation

Each controller type offers specific functionalities and is compatible with various Miboxer 2.4GHz RF remote controls. All controllers also support PUSH dimmer functionality.

FUT036P: Single Color LED Controller

  • Features: Brightness adjustable.
  • Compatible Remotes: FUT006, FUT007, B1/B1-B/T1, B2/T2, K1/K1-B, WL-Box1, S1-B/S1-W/S1-G.
Single Color LED Controller Features and Compatible Remotes
Figure 13: Single Color LED Controller features and compatible remotes

FUT035P: Dual White LED Controller

  • Features: Stepless dimming brightness, color temperature adjustable, frequency switched (High(8KHz)/Low(500Hz)).
  • Compatible Remotes: FUT089, FUT089-B, FUT088, FUT092, FUT092-B, WL-Box1, B8, B4/B4-B/T4, B0, S2-W/S2-B/S2-G.
Dual White LED Controller Features and Compatible Remotes
Figure 14: Dual White LED Controller features and compatible remotes

FUT037P: RGB LED Controller

  • Features: 16 Million colors to choose, mix RGB light to adjust color temperature, stepless dimming brightness, frequency switched (High(8KHz)/Low(500Hz)).
  • Compatible Remotes: FUT087/FUT087-B, FUT007, FUT006, WL-Box1, S1-W/S1-B/S1-G, B1/B1-B/T1, B2/B2-B, K1/K1-B.

FUT038P: RGBW LED Controller

  • Features: 16 Million colors to choose, dedicated White mode, stepless dimming brightness, frequency switched (High(8KHz)/Low(500Hz)).
  • Compatible Remotes: FUT089, FUT088, FUT092, FUT096, WL-Box1, B8, B4/B4-B/T4, B3/B3-B/T3, B0, S2-W/S2-B/S2-G.
RGBW LED Controller Features and Compatible Remotes
Figure 15: RGBW LED Controller features and compatible remotes

FUT039P: RGB+CCT LED Controller

  • Features: 16 Million colors to choose, saturation control, mix RGB light to adjust color temperature, stepless dimming brightness, frequency switched (High(8KHz)/Low(500Hz)).
  • Compatible Remotes: FUT089, FUT088, FUT092, FUT096, WL-Box1, B8, B4/B4-B/T4, B3/B3-B/T3, B0, S2-W/S2-B/S2-G.
RGB+CCT LED Controller Features and Compatible Remotes
Figure 16: RGB+CCT LED Controller features and compatible remotes

6.2. Smartphone App & Voice Control

Once your controllers are linked to a Miboxer 2.4GHz gateway and integrated with your smart home system (e.g., Amazon Alexa, Google Assistant), you can control your LED lights using the respective smartphone app or voice commands. Refer to the gateway's manual for specific app functionalities and voice command syntax.

7. Maintenance

  • Keep the controller clean and free from dust. Use a dry, soft cloth for cleaning.
  • Avoid exposing the controller to direct sunlight, high humidity, or extreme temperatures.
  • Regularly check wiring connections to ensure they are secure and free from damage.

8. Troubleshooting

  • Lights not responding: Check power supply connections, ensure the controller is powered, and verify remote control pairing. Ensure the remote's battery is not depleted.
  • Inconsistent control range: Ensure no obstructions are blocking the 2.4GHz signal. If using multiple controllers, verify they are within 30m of each other for signal transmitting to function effectively.
  • App/Voice control issues: Confirm the 2.4GHz gateway is properly connected to your network and the controllers are linked to the gateway. Check your internet connection and smart home platform settings.
  • LEDs flickering or incorrect colors: Verify that the correct controller type is used for your LED strip (e.g., RGB controller for RGB strip) and that all wiring connections are correct and secure.

9. Warranty and Support

This product comes with a 2-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please contact your retailer or the manufacturer directly. Contact information can typically be found on the product packaging or the seller's website.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.