1. Introduction
The KODAK X120 Pro Internal SSD is a high-performance 2.5-inch Solid State Drive designed to enhance the speed and responsiveness of your laptop or desktop computer. Featuring a SATA III 6Gb/s interface, it offers fast boot-up times, quick application loading, and rapid file transfers. This manual provides essential information for installing, operating, and maintaining your SSD to ensure optimal performance and longevity.
Figure 1: KODAK X120 Pro Internal SSD
Video 1: KODAK X120 Pro SSD Product Overview
2. Specifications
The KODAK X120 Pro SSD is available in various capacities and offers robust performance. Below are the detailed technical specifications:
Figure 2: KODAK X120 Pro SSD Product Parameters
| Attribute | Value |
|---|---|
| Model | Kodak X120 Pro |
| Capacity Options | 128GB, 256GB, 512GB, 1TB |
| Flash Type | 3D TLC particles |
| Max Sequential Read Speed | Up to 550MB/s |
| Max Sequential Write Speed | Up to 510MB/s |
| Random Read IOPS | Up to 80,000 IOPS |
| Random Write IOPS | Up to 87,000 IOPS |
| Application | Desktop, Laptop, Server, Workstation |
| Size (Form Factor) | 2.5 inches (100mm (L) x 69.85mm (W) x 7.00mm (H)) |
| Physical Interface | SATA 3.0 (SATA III 6Gb/s) |
| Interface Bandwidth | 6 Gbit/s (compatible with SATA II 3Gb/s) |
| Transport Protocol | AHCI |
| Nand Flash Type | TLC |
| Controller | SMI/Phison/RLK/Others |
| Memory Management | ECC (Error Correction Code) |
| Reliability (MTBF) | 2,000,000 hours |
| Safety Features | Dustproof, Shockproof |
| Operating Temperature | 0°C to 70°C |
| Certification | CE |
| SSD Body Material | Plastic |
| Package | Yes |
*Note: Speed is dependent on host device, interface, usage conditions, and the type of your device. The above data is derived from Kodak test results and may vary due to different test environments and platforms. It is for reference only.
**About Usable Capacity:** Vendors calculate capacity using decimal arithmetic (1MB = 1000KB, 1GB = 1000MB), while operating systems use binary arithmetic (1MB = 1024KB, 1GB = 1024MB). This difference results in a slightly lower displayed capacity than the nominal capacity on your operating system. For example:
- 128GB: Approximately 119 GB usable
- 256GB: Approximately 238 GB usable
- 512GB: Approximately 476 GB usable
- 1TB: Approximately 930 GB usable
3. Installation Guide
3.1 Before You Begin
- Ensure your computer is powered off and unplugged from the power source.
- Ground yourself to prevent electrostatic discharge (ESD) by touching a metal object or using an anti-static wrist strap.
- Gather necessary tools: Phillips-head screwdriver, SATA data cable (if not replacing an existing drive), SATA power cable (usually from PSU).
- Back up any important data from your old drive if you are replacing it.
3.2 Desktop Installation
- Open your computer case. Refer to your computer's manual for specific instructions.
- Locate an available 2.5-inch drive bay. If your case only has 3.5-inch bays, you may need a 2.5-inch to 3.5-inch adapter bracket (not included).
- Mount the KODAK X120 Pro SSD into the drive bay using screws.
- Connect one end of the SATA data cable to the SSD and the other end to an available SATA port on your motherboard.
- Connect a SATA power cable from your power supply unit (PSU) to the SSD.
- Close your computer case and reconnect all cables.
Figure 3: Illustrative Desktop SSD Installation
3.3 Laptop Installation
- Open your laptop's drive bay. This usually involves removing a panel on the bottom of the laptop or the entire bottom cover. Refer to your laptop's manual for specific instructions.
- Remove the old hard drive (if applicable) by unscrewing it from its bracket or sliding it out.
- Attach the KODAK X120 Pro SSD to the drive bracket (if one was used for the old drive).
- Slide the SSD into the drive bay and secure it with screws.
- Close the laptop's drive bay cover and reconnect all cables.
Figure 4: Illustrative Laptop SSD Installation
4. Operating Instructions
4.1 Initializing and Formatting the SSD (New Installation)
If you are installing the SSD as a new drive, it will need to be initialized and formatted before use. If you are migrating your operating system, this step may not be necessary.
- Boot your computer.
- Open Disk Management (Windows: Right-click Start -> Disk Management; macOS: Applications -> Utilities -> Disk Utility).
- Locate your new KODAK X120 Pro SSD. It will likely appear as "Unallocated Space."
- Right-click on the unallocated space and select "Initialize Disk." Choose GPT (GUID Partition Table) for modern systems or MBR (Master Boot Record) for older systems (Windows 7 or older, or if you have specific compatibility needs).
- After initialization, right-click the unallocated space again and select "New Simple Volume" (Windows) or "Erase" (macOS).
- Follow the on-screen prompts to create a new partition, assign a drive letter, and format the drive (NTFS for Windows, APFS/Mac OS Extended for macOS).
4.2 Operating System Migration (Optional)
To transfer your existing operating system and data to the new SSD, you will need disk cloning software. Many free and paid options are available online. Follow the instructions provided with your chosen cloning software.
4.3 Data Storage and Transfer
Once installed and formatted, your KODAK X120 Pro SSD functions like any other storage drive. You can save files, install applications, and transfer data to and from it. Its high read/write speeds will significantly reduce loading times for games and applications, and improve overall system responsiveness.
Figure 5: Enhanced Performance with SSD
5. Maintenance and Care
To ensure the longevity and optimal performance of your KODAK X120 Pro SSD, follow these maintenance guidelines:
- Enable TRIM: Ensure TRIM is enabled in your operating system. TRIM helps the SSD manage its storage space efficiently, preventing performance degradation over time. Most modern operating systems enable TRIM by default for SSDs.
- Avoid Defragmentation: Unlike traditional hard drives, SSDs do not benefit from defragmentation. In fact, defragmenting an SSD can reduce its lifespan by causing unnecessary write cycles. Disable any automatic defragmentation for your SSD.
- Monitor S.M.A.R.T. Data: Use disk utility software to periodically check the S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) status of your SSD. This can provide early warnings of potential drive issues.
- Maintain Free Space: Avoid filling your SSD to its maximum capacity. Keeping some free space (e.g., 10-15%) allows the SSD's wear-leveling algorithms to function effectively and maintain performance.
- Regular Backups: While SSDs are generally reliable, no storage device is immune to failure. Regularly back up your important data to another drive or cloud storage.
- Keep Firmware Updated: Check the Kodak website for any available firmware updates for your SSD model. Firmware updates can improve performance, stability, and compatibility.
6. Troubleshooting
6.1 SSD Not Detected
- Check Connections: Ensure both the SATA data and power cables are securely connected to the SSD and the motherboard/PSU.
- BIOS/UEFI Settings: Enter your computer's BIOS/UEFI settings and verify that the SATA port the SSD is connected to is enabled. Also, check if the SATA mode is set to AHCI (recommended for SSDs).
- Try Another Port/Cable: Test the SSD with a different SATA port on your motherboard and/or different SATA cables to rule out faulty components.
- Disk Management (Windows): If detected by BIOS but not in Windows Explorer, check Disk Management. The drive might need to be initialized and formatted (see Section 4.1).
6.2 Slow Performance
- SATA III Connection: Ensure the SSD is connected to a SATA III (6Gb/s) port on your motherboard for maximum speed. Connecting to a SATA II port will limit performance.
- TRIM Enabled: Verify that TRIM is enabled in your operating system (see Section 5).
- Firmware Update: Check for and install any available firmware updates for your SSD.
- Over-filling: If the SSD is nearly full, performance can degrade. Free up some space.
- Driver Issues: Ensure your motherboard's SATA drivers are up to date.
6.3 Operating System Fails to Boot
- Boot Order: Check your BIOS/UEFI settings to ensure the SSD is set as the primary boot device.
- OS Migration Issues: If you migrated your OS, ensure the cloning process was successful and the boot partition is correctly configured. You may need to repair the bootloader using your OS installation media.
7. User Tips
- For optimal performance, install your operating system and frequently used applications on the SSD.
- Consider using a larger traditional hard drive (HDD) for bulk storage of less frequently accessed files, photos, and videos to maximize SSD lifespan and performance.
- Regularly check for system updates and SSD firmware updates to ensure compatibility and performance improvements.
- If you're upgrading from an HDD, you'll notice a significant speed boost in boot times and application loading.
8. Warranty and Support
KODAK X120 Pro SSDs come with a manufacturer's warranty. Please refer to the packaging or the official Kodak website for the most up-to-date warranty terms and conditions.
- Warranty Period: The specific warranty period may vary by region and retailer.
- Free Returns: Free returns are available within 90 days of purchase.
- Fast Delivery Guarantee: If delivery is delayed, a coupon code may be provided. Refunds are available if the package is lost or items are damaged.
Figure 6: Illustrative Warranty Process
Customer Support:
For technical assistance, warranty claims, or any product-related inquiries, please contact the seller or refer to the official Kodak support channels. Keep your proof of purchase handy when contacting support.
