Brother BAS-300G/311G/326G Programmer Keyboard Control Box Module

Contents

Instruction Manual

Brother BAS-300G/311G/326G Programmer Keyboard Control Box Module

Handheld Programmer Assembly for Industrial Sewing Machines

1. Introduction

This manual provides instructions for the proper setup, operation, maintenance, and troubleshooting of the Brother BAS-300G/311G/326G series programmer keyboard control box module. This handheld unit is designed to interface with compatible Brother industrial sewing machines to program and control various sewing operations.

2. Components Overview

The programmer unit consists of a display screen, a directional navigation pad, a numeric keypad, and various function keys. It connects to the sewing machine's control box via an integrated cable.

Front view of the Brother handheld programmer

Figure 1: Front view of the handheld programmer, showing the screen, directional pad, and numeric/function keypad.

Side view of the Brother handheld programmer with a slot

Figure 2: Side view of the handheld programmer, showing a slot for potential memory card or expansion.

Rear view of the Brother handheld programmer with cable

Figure 3: Rear view of the handheld programmer, showing the attached cable with a DB9 connector.

Close-up of the DB9 connector

Figure 4: Close-up of the DB9 connector on the cable, used for connecting to the sewing machine's control box.

3. Setup Instructions

  1. Power Off: Ensure the industrial sewing machine and its control box are completely powered off before connecting the programmer.
  2. Locate Connection Port: Identify the compatible connection port on your Brother industrial sewing machine's control box. This is typically a DB9 serial port.
  3. Connect Programmer: Carefully align the DB9 connector of the handheld programmer's cable (refer to Figure 4) with the port on the sewing machine's control box. Push firmly until it is securely seated. If available, tighten any retaining screws on the connector.
  4. Power On: Once the programmer is securely connected, power on the industrial sewing machine and its control box. The programmer's screen should illuminate, indicating a successful connection.
  5. Initial Check: Verify that the programmer displays the correct model information or a main menu, indicating it is communicating with the sewing machine.

4. Operating Instructions

The handheld programmer allows for various functions related to sewing pattern creation, modification, and machine settings adjustment. Specific operations will depend on the connected sewing machine model (BAS-300G, BAS-311G, BAS-326G) and its firmware.

4.1 Keypad Functions (Refer to Figure 1)

  • Numeric Keys (0-9): Used for entering numerical values, such as stitch counts, dimensions, or program numbers.
  • Directional Pad (Up, Down, Left, Right, Center): Navigates through menus, selects options, and moves the cursor on the screen. The center button typically acts as an 'Enter' or 'Confirm' key.
  • Function Keys (F, M, R, C, L, E, LI): These keys perform specific functions depending on the current screen or mode. Their exact purpose is usually displayed on the screen or detailed in the main sewing machine's operation manual.
  • Home Button (⌂): Returns to the main menu or home screen.
  • Enter/Exit Button (⏎): Confirms selections or exits current menus/modes.
  • Back/Undo Button (↶): Moves back one step in a menu or undoes the last action.
  • Forward/Redo Button (↷): Moves forward or redoes an action.

4.2 Basic Operation Flow

  1. Access Menu: Use the directional pad to navigate the main menu displayed on the screen.
  2. Select Function: Choose the desired function, such as 'Pattern Edit', 'Machine Settings', 'Data Transfer', etc., and press the center directional pad button or the Enter key.
  3. Input Data: Use the numeric keypad and function keys to input or modify parameters as required by the selected function.
  4. Save Changes: Always ensure to save any changes made to patterns or settings before exiting the function or powering off the machine.
  5. Exit: Use the Exit button or navigate back to the main menu when finished.

5. Maintenance

  • Cleaning: Regularly wipe the screen and keypad with a soft, dry, lint-free cloth. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid harsh chemicals.
  • Storage: When not in use, store the programmer in a clean, dry environment, away from direct sunlight, extreme temperatures, and excessive dust.
  • Cable Care: Avoid bending or twisting the connection cable excessively. Inspect the cable and connectors periodically for any signs of wear or damage.
  • Avoid Liquids: Keep the programmer away from liquids to prevent internal damage.

6. Troubleshooting

6.1 Common Issues and Solutions

ProblemPossible CauseSolution
Programmer screen is blank or unresponsive.Not powered on, loose connection, machine not powered on.Ensure the sewing machine and control box are powered on. Check that the programmer's cable is securely connected to the control box.
Keys are not responding.Dirt under keys, internal malfunction.Clean the keypad area. If the issue persists, contact support.
Error message on screen.Programming error, machine fault, incompatible data.Refer to the specific error code in your main sewing machine's operation manual. Ensure data being input is valid for the machine.
Programmer not recognized by sewing machine.Incorrect connection, machine model incompatibility.Verify the cable is correctly and firmly connected. Confirm that your sewing machine model (BAS-300G, BAS-311G, BAS-326G) is compatible with this programmer.

7. Specifications

FeatureDetail
Product TypeProgrammer Keyboard Control Box Module (Handheld)
CompatibilityBrother BAS-300G, BAS-311G, BAS-326G Industrial Sewing Machines
Stitch Formation (Machine)Lock Stitch
Approx. Package Weight0.98 kg
Approx. Package Dimensions (L x W x H)15 cm x 15 cm x 20 cm
OriginMainland China

8. User Tips

  • Compatibility Check: This programmer is confirmed to be compatible with Brother BAS-300G models. Always verify compatibility with your specific machine model before use.
  • Refer to Machine Manual: For detailed programming instructions and specific functions related to your sewing machine, always consult the original operation manual provided with your Brother industrial sewing machine.
  • Gentle Handling: While robust, treat the handheld unit with care. Avoid dropping it or applying excessive force to the screen or buttons.
  • Secure Connections: Ensure all cable connections are firm to prevent intermittent communication issues during programming.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or the manufacturer directly. Keep your purchase records handy when seeking support.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.