1. Introduction
The A-BF Constant Power Supply is a high-precision, adjustable DC voltage regulator designed for laboratory and bench use. It offers stable and reliable power output with a wide range of voltage and current capabilities, making it suitable for various electronic testing and development applications. This manual provides essential information for the safe and efficient operation of your power supply.
2. Safety Information
Please read and understand all safety instructions before operating the device. Failure to follow these instructions may result in electric shock, fire, or damage to the product.
- Always connect the power supply to a grounded outlet.
- Do not operate the device in wet or damp conditions.
- Ensure proper ventilation to prevent overheating.
- Do not open the casing; there are no user-serviceable parts inside.
- Disconnect power before making any connections or disconnections to the output terminals.
- Verify the input voltage switch (110V/220V) is set correctly for your region before powering on.
- Avoid short-circuiting the output terminals.
3. Package Contents
Upon unpacking, please verify that all standard accessories are included:
- A-BF Constant Power Supply Unit
- Test Leads (Red and Black)
- Power Cable
- User Manual (this document)
4. Product Overview
The A-BF Constant Power Supply features a clear three-color digital display for real-time voltage, current, and power readings. It incorporates multiple protection mechanisms and convenient functions for efficient operation.
4.1 Front and Rear Panel Functions
| No. | Component | Description |
|---|---|---|
| 1 | Output Voltage Display | Shows the current output voltage. |
| 2 | Output Current Display | Shows the current output current. |
| 3 | Power Display | Shows the current output power. |
| 4 | OCP Settings Button | Button for Overcurrent Protection settings. |
| 5 | Store/Recall Buttons (M1/M2/M3) | Buttons for saving and recalling preset voltage/current values. |
| 6 | Output ON/OFF Button | Controls the output power to the terminals. |
| 7 | OVP Settings Button | Button for Overvoltage Protection settings. |
| 8 | Adjusting Knob | Rotary encoder for adjusting voltage and current values. |
| 9 | Voltage Value Setting | Tap to enter voltage value setting mode. |
| 10 | Current Value Setting | Tap to enter current value setting mode. |
| 11 | USB Output Port | USB port for quick charging devices. |
| 12 | Output Terminal Negative Pole (-) | Connect the negative lead of your load here. |
| 13 | Positive Output Terminal (+) | Connect the positive lead of your load here. |
| No. | Component | Description |
|---|---|---|
| 14 | Power Switch | Main power ON/OFF switch for the unit. |
| 15 | Communication Port | RS485 port for Modbus communication (optional serial port required for software control). |
| 16 | Cooling Fan | Provides active cooling for internal components. |
| 17 | Mains Voltage Input Socket | Connect the provided power cable here. |
| 18 | Fuse Holder | Contains the main fuse for overcurrent protection. |
| N/A | 110V/220V Switch (Optional) | Selects the appropriate input voltage for your region. Ensure this is set correctly. |
5. Setup
- Unpack and Inspect: Carefully remove the power supply and all accessories from the packaging. Inspect for any signs of damage.
- Input Voltage Selection: Locate the 110V/220V switch on the rear panel (if present). Ensure it is set to match your local mains voltage. Incorrect setting can damage the unit.
- Power Connection: Connect the provided power cable to the Mains Voltage Input Socket (17) on the rear panel and then to a grounded wall outlet.
- Initial Power On: Flip the Power Switch (14) on the rear panel to the 'ON' position. The display should illuminate.
6. Operating Instructions
6.1 Setting Voltage and Current
- Adjusting Voltage: Tap the Voltage Value Setting button (9). The voltage display will blink. Rotate the Adjusting Knob (8) to set the desired voltage. Tap the button again to confirm or wait a few seconds for it to auto-confirm.
- Adjusting Current: Tap the Current Value Setting button (10). The current display will blink. Rotate the Adjusting Knob (8) to set the desired current limit. Tap the button again to confirm or wait a few seconds for it to auto-confirm.
6.2 Output ON/OFF Control
After setting the desired voltage and current, press the Output ON/OFF Button (6) to enable or disable the power output to the terminals. The display will indicate 'ON' or 'OFF'.
6.3 Memory Function (M1/M2/M3)
The power supply allows you to save and recall three sets of frequently used voltage and current settings.
- To Save: Set the desired voltage and current. Press and hold one of the Store/Recall Buttons (M1, M2, or M3) for a few seconds until the display indicates the setting has been saved.
- To Recall: Briefly press one of the Store/Recall Buttons (M1, M2, or M3) to load the saved settings.
6.4 Protection Settings (OVP, OCP)
The unit includes Overvoltage Protection (OVP) and Overcurrent Protection (OCP) to safeguard your load and the power supply.
- OVP Setting: Press the OVP Settings Button (7). Use the Adjusting Knob (8) to set the maximum allowable output voltage. If the output voltage exceeds this limit, the power supply will shut down.
- OCP Setting: Press the OCP Settings Button (4). Use the Adjusting Knob (8) to set the maximum allowable output current. If the output current exceeds this limit, the power supply will shut down.
Additional protections include Over Temperature Protection (OTP), Short-circuit Protection (SCP), and Overpower Protection (OPP). Software setting protection is also available via the communication port with optional software.
6.5 USB Quick Charge Port
The USB Output Port (11) on the front panel provides a convenient way to charge compatible devices.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the power supply. Do not use abrasive cleaners or solvents.
- Ventilation: Ensure the cooling fan (16) and ventilation openings are free from dust and obstructions to maintain proper airflow.
- Fuse Replacement: If the unit fails to power on, check the fuse in the Fuse Holder (18) on the rear panel. Replace with a fuse of the same type and rating if necessary.
- Storage: When not in use for extended periods, store the power supply in a cool, dry place, away from direct sunlight and extreme temperatures.
8. Troubleshooting
- No Power:
- Check if the power cable is securely connected.
- Ensure the rear power switch is ON.
- Verify the input voltage switch (110V/220V) is set correctly.
- Check and replace the fuse if blown.
- No Output Voltage/Current:
- Ensure the front panel Output ON/OFF button is set to 'ON'.
- Check if OVP or OCP has been triggered. Reset by turning the output OFF then ON, or by adjusting the protection limits.
- Verify connections to the output terminals are secure.
- Unstable Output:
- Ensure the load is within the power supply's specifications.
- Check for loose connections.
- Ensure adequate ventilation to prevent overheating.
9. Specifications
| Parameter | Value |
|---|---|
| Input Voltage | 110V (US Version) / 220V (EU, UK, AU Version) |
| Output Power | 300W (for HP and MP/MF models), 150W (for SS-305MP/SS-305MF) |
| Voltage Load Regulation | ≤0.1%+5mV |
| Voltage Line Regulation | ≤0.01%+5mV |
| Current Load Regulation | ≤0.2%+3mA |
| Current Line Regulation | ≤0.2%+3mA |
| Operating Range | 0°C~40°C, ≤80%RH |
| Suggested Operating Range | 23°C±5° |
| Dimensions (L*W*H) | 230mm * 80mm * 150mm |
| Weight | 1.95kg |
| Certification | CE |
9.1 Model-Specific Output Ranges
| Model | Voltage (0~Vmax) | Current (0~Amax) | Power |
|---|---|---|---|
| SS-4020HP | 0~40V | 0~20A | 300W |
| SS-8010HP | 0~80V | 0~10A | 300W |
| SS-1605HP | 0~160V | 0~5A | 300W |
| SS-3010MP/SS-3010MF | 0~32V | 0~10A | 300W |
| SS-305MP/SS-305MF | 0~32V | 0~5A | 150W |
10. User Tips
- For precise adjustments, use the fine-tuning capability of the adjusting knob by pressing it in to switch between coarse and fine adjustment modes (if available on your model).
- Always set the voltage and current limits before connecting your sensitive load to prevent accidental damage.
- Utilize the memory functions (M1, M2, M3) to quickly switch between common test configurations.
11. Warranty and Support
A-BF products are designed for reliability and performance. For warranty information and technical support, please refer to the official A-BF website or contact your authorized dealer. Keep your purchase receipt as proof of purchase.