Introduction
This manual provides comprehensive instructions for the Superior Universal Remote Control. This advanced remote is designed to consolidate control of up to four different electronic devices into a single, easy-to-use unit. It comes pre-programmed to match the functions of your original remote control, offering a simple plug-and-play experience once batteries are inserted.
The remote is compatible with a wide range of devices, including TVs, Smart TVs, DVDs, TDT (Digital Terrestrial Television) receivers, satellite receivers, decoders, Hi-Fi systems, amplifiers, sound equipment, and projectors.
Figure 1: Superior Universal Remote Control. This black remote features dedicated buttons for power, mute, device selection (TV, SAT, DVD, AUX), menu navigation, numeric input, volume, channel control, and media playback functions. The 'SUPERIOR' brand logo is located at the bottom.
Setup
1. Battery Installation
- Locate the battery compartment on the back of the remote control.
- Slide open the battery compartment cover.
- Insert two LR03 AAA batteries (not included), ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Close the battery compartment cover securely.
Once batteries are installed, the remote control is ready for use as it is pre-programmed by the seller based on your device information.
Operating Instructions
The Superior Universal Remote Control is designed for intuitive operation. Below is a guide to its primary functions:
- POWER: Turns the selected device on or off.
- MUTE: Mutes or unmutes the audio.
- Device Selection (TV, SAT, DVD, AUX): Press these buttons to select which device the remote will control. The remote can control up to four different devices.
- MENU: Accesses the on-screen menu of the selected device.
- EXIT: Exits the current menu or function.
- SHIFT: Used for accessing secondary functions of certain buttons (if applicable).
- Numeric Keypad (0-9): For direct channel input or menu selections.
- TV/AV: Switches between TV and AV input sources.
- PVR: Activates Personal Video Recorder functions.
- SIZE: Adjusts screen size or aspect ratio.
- SETUP: Accesses device setup menus.
- Volume Control (V+, V-): Increases or decreases the volume.
- Channel Control (P+, P-): Changes channels up or down.
- OK: Confirms selections in menus.
- Navigation Arrows (Up, Down, Left, Right): Navigates through menus and options.
- BACK: Returns to the previous screen or menu.
- SLEEP: Sets a sleep timer for the device.
- TV/DTV: Switches between analog TV and digital TV modes.
- INFO: Displays information about the current program or input.
- EPG: Accesses the Electronic Program Guide.
- FAV: Accesses favorite channels list.
- Media Playback Controls (Rewind, Play/Pause, Fast Forward, Stop, Record): Controls playback of media on compatible devices.
Maintenance
Battery Replacement
When the remote control's performance degrades or buttons become unresponsive, it's time to replace the batteries. Follow the battery installation steps outlined in the "Setup" section.
Cleaning
To clean the remote control, use a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Do not use harsh chemicals or immerse the remote in water.
Troubleshooting
- Remote not responding:
- Check if the batteries are inserted correctly with the right polarity.
- Replace old batteries with new LR03 AAA batteries.
- Ensure there are no obstructions between the remote control and the device.
- Make sure you have selected the correct device mode (TV, SAT, DVD, AUX) for the device you intend to control.
- Some functions not working:
- Verify that the remote is pointed directly at the device's IR receiver.
- Confirm that the device you are trying to control is one of the models for which the remote was programmed.
If issues persist, please contact the seller for further assistance, providing details of your device brand and model.
Specifications
| Feature | Detail |
|---|---|
| Type | Universal Remote Control |
| Device Capacity | Controls up to 4 devices |
| Power Source | 2 x LR03 AAA batteries (not included) |
| Compatibility | TV, Smart TV, DVD, TDT, Satellite Receivers, Decoders, Hi-Fi, Amplifiers, Sound Equipment, Projectors (including specific models like AIRIS L107, L108, L105C, L114, L110, L120, L105, L202, L103E, L103D, L103C, KT777A) |
| Certification | CE |
| Origin | ES (Spain) |
User Tips
- Provide Accurate Device Information: To ensure your universal remote is perfectly programmed, always provide the exact brand and model of your devices to the seller. This information is typically found on a sticker on the back of your device. A photo of the original remote can also be helpful.
- Keep Line of Sight Clear: For optimal performance, ensure there is a clear line of sight between the remote control and the infrared receiver on your device.
Warranty & Support
This universal remote control is manufactured and guaranteed by Superior Electronics, ensuring all functions are included and operational. For any doubts or issues not covered in this manual, please contact the seller directly for support. Providing your device's brand and model will help expedite assistance.
