ISUDAR SU6901

Contents

ISUDAR SU6901 Car Subwoofer Amplifier User Manual

Model: SU6901 | Brand: ISUDAR

1. Introduction

Thank you for choosing the ISUDAR SU6901 Car Subwoofer Amplifier. This active subwoofer is designed to enhance your car audio system with powerful, deep bass. Featuring a built-in amplifier and a slim design, it can be conveniently installed under a seat, saving space while delivering high-fidelity sound. This manual will guide you through the installation, operation, and maintenance of your new subwoofer to ensure optimal performance and longevity.

2. Safety Information

  • Always disconnect the vehicle's battery before starting any electrical work.
  • Ensure all wiring is correctly connected and insulated to prevent short circuits and damage.
  • Do not install the subwoofer in a location where it could obstruct driving or interfere with vehicle safety systems.
  • Avoid exposing the unit to excessive moisture, dust, or extreme temperatures.
  • If you are unsure about any installation steps, consult a professional car audio installer.
  • Use fuses of the specified rating only.

3. Package Contents

Please check the box for the following items:

  • ISUDAR SU6901 Active Subwoofer Unit
  • Remote Control Unit
  • Wiring Harness (Power and Signal)
  • Installation Guide / User Manual
  • Mounting Accessories (Brackets, Screws)
ISUDAR SU6901 Subwoofer and included accessories: remote control, wiring harness, and mounting hardware.
Figure 3.1: Package Contents - Subwoofer unit, remote control, wiring, and mounting accessories.

4. Product Features

  • Active Subwoofer with Built-in Amplifier: Delivers powerful and clear bass without the need for a separate amplifier.
  • High and Low Level Input Support: Compatible with various car audio systems, including those without RCA outputs.
  • Slim and Compact Design: Designed for discreet installation, typically under a car seat, saving valuable space.
  • Variable Low Pass Filter (LPF): Allows adjustment of the frequency range for optimal bass integration.
  • Variable Bass Boost: Provides additional control over bass intensity.
  • High-Strength Protective Alloy Mesh: Durable speaker protection.
  • Frosted Aluminum Alloy Body: Effectively reduces noise caused by vibration.
  • Thick Copper Cables: Ensures minimal interference and high sound quality (power cables sold separately).
ISUDAR SU6901 Active Subwoofer, highlighting Hi-Fi Bass and compact size.
Figure 4.1: Active Subwoofer with Hi-Fi Bass capabilities.
ISUDAR SU6901 Subwoofer with a visual representation of powerful bass output.
Figure 4.2: Real 150W High Power output for enhanced bass.
Diagram showing the quality materials of the ISUDAR SU6901: high-strength protective alloy mesh, frosted aluminum alloy body, tunable controls, and thick copper cables.
Figure 4.3: Excellent materials for better quality and performance.

5. Specifications

FeatureSpecification
Model NameSU6901
TypeActive Base Subwoofer
Outer Diameter9"
Amplifier Power (RMS)150W RMS
Bass Boost0 to +18dB
Working Current12A
Fuse15A/20A
Frequency Range20Hz - 150Hz
Signal To Noise Ratio>90dB
THD (Total Harmonic Distortion)<0.4%
High Level Input Sensitivity1.0 - 9.0V
Low Level Input Sensitivity0.1 - 6.0V
Voltage12 V
Item Weight4.7kg
Item Size6x9" (Dimensions: 293mm x 214mm x 71mm)
ColorBlack
Subwoofer TypeEnclosed Subwoofer System
CertificationCE
Diagram showing the dimensions of the ISUDAR SU6901 subwoofer (293mm x 214mm x 71mm) and a table of its parameters including model, type, outer diameter, amplifier power, bass boost, working current, fuse, and frequency range.
Figure 5.1: Product Dimensions and Parameter Table.

6. Installation

6.1 Choosing an Installation Location

The ISUDAR SU6901 is designed for compact installation. Common locations include:

  • Under the main driver's seat
  • Under the front passenger seat
  • Under the rear glass
  • In the trunk

Generally, it is placed under the seat of the main driver or co-pilot. The exact placement can be fixed and installed according to the actual situation in your vehicle.

Diagram of a car interior showing potential installation locations for the subwoofer: under the main driver's seat, under the front passenger seat, under the rear glass, and in the trunk.
Figure 6.1: Recommended Installation Locations.
Image showing the slim ISUDAR SU6901 subwoofer installed discreetly under a car seat.
Figure 6.2: Slim and hidden design installed under the seat.

6.2 Wiring Diagram and Connections

Refer to the diagram below for proper wiring connections. Ensure all connections are secure and correctly polarized.

Detailed wiring diagram for the ISUDAR SU6901 subwoofer. Labels include: Power Green, Protect Red, Phase, Auto Power On switch, Low Pass filter, Bass Boost, Input Gain, Remote Control port, High Level Input, Low Level Input (L and R), Fuse, +12V Power, and GND (Ground).
Figure 6.3: Control Panel and Wiring Connections.
  1. Power Connection:
    • Connect the +12V terminal to the positive terminal of the car battery using a thick gauge power cable (not included). Ensure an inline fuse (15A/20A) is installed close to the battery.
    • Connect the GND (Ground) terminal to a clean, unpainted metal surface of the vehicle chassis.
    • Connect the REM (Remote) terminal to the remote turn-on output of your head unit. Alternatively, use the "Auto Power On" feature if your head unit does not have a remote output.
  2. Signal Input:
    • Low Level Input (RCA): If your head unit has RCA pre-outs, connect them to the "Low Level L" and "Low Level R" inputs.
    • High Level Input: If your head unit does not have RCA pre-outs, connect the speaker wires from your head unit to the "High Level Input" connector. Ensure correct polarity (High+/Level-).
  3. Remote Control: Connect the wired remote control to the "Remote Control" port for easy bass level adjustment.

6.3 Installation Demonstration Video

Watch this video for a visual guide on unboxing and installing the ISUDAR SU6901 subwoofer.

Video 6.1: Unboxing and Installation of the ISUDAR SU6901 Subwoofer.

7. Operating Instructions

Once installed, you can adjust the subwoofer's settings using the controls on the unit and the remote control.

Detailed control panel of the ISUDAR SU6901 subwoofer, showing Phase switch, Auto Power On switch, Low Pass filter knob, Bass Boost knob, Input Gain knob, and Remote Control port.
Figure 7.1: Subwoofer Control Panel.
  • Phase Switch: Adjusts the phase of the subwoofer output (0° or 180°). Experiment with both settings to find the one that provides the most coherent bass response with your main speakers.
  • Auto Power On Switch: If your head unit does not have a remote turn-on wire, set this switch to "ON". The subwoofer will detect an audio signal and power on automatically. If using a remote wire, set to "OFF".
  • Low Pass Filter (LPF) Knob: Controls the upper frequency limit of the subwoofer. Adjust this to blend the subwoofer's output smoothly with your main speakers. A common starting point is around 80-100Hz.
  • Bass Boost Knob: Increases the bass output at a specific frequency. Use sparingly to avoid distortion.
  • Input Gain Knob: Matches the output level of your head unit to the input sensitivity of the subwoofer. Start with the gain at minimum and slowly increase it until the bass sounds balanced and clear without distortion.
  • Remote Control: The wired remote allows convenient adjustment of the bass level from your driving position.

7.1 Bass Performance Demonstration Video

This video demonstrates the bass performance of the ISUDAR SU6901 subwoofer, showing its ability to vibrate a cup of water without spilling.

Video 7.2: Bass Performance Test with a cup of water on the subwoofer.

8. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the exterior of the subwoofer. Do not use harsh chemicals or abrasive cleaners.
  • Ventilation: Ensure the subwoofer has adequate ventilation. Do not block the grille or any vents.
  • Connections: Periodically check all wiring connections to ensure they are secure and free from corrosion.
  • Environment: Avoid prolonged exposure to direct sunlight or extreme temperatures, which can affect performance and lifespan.

9. Troubleshooting

ProblemPossible CauseSolution
No SoundNo power; incorrect wiring; blown fuse; low input gain; no signal.Check power and ground connections. Verify remote turn-on. Check fuse. Increase input gain. Ensure audio source is playing.
Distorted SoundInput gain too high; bass boost too high; incorrect LPF setting; poor quality audio source.Reduce input gain. Lower bass boost. Adjust LPF. Test with a different audio source.
Subwoofer Not Turning OnNo remote signal; Auto Power On switch off; power connection issue.Check remote wire connection or ensure "Auto Power On" is enabled. Verify +12V and GND connections.
Weak BassLow input gain; incorrect phase setting; LPF too low; poor enclosure.Increase input gain. Try switching the phase (0°/180°). Adjust LPF higher. Ensure proper installation location.

10. User Tips

  • Optimal Sound Blending: Spend time adjusting the Low Pass Filter and Phase settings to achieve a seamless blend between the subwoofer and your car's main speakers. This often requires listening to various music genres.
  • Gain Setting: The input gain should be set to match your head unit's output, not to maximize volume. Setting it too high will introduce distortion.
  • Cable Quality: While the subwoofer comes with necessary wiring, using high-quality pure copper power cables (sold separately) can significantly reduce interference and improve overall sound quality.
  • Secure Mounting: Ensure the subwoofer is securely mounted to prevent movement and potential damage during driving, which can also affect sound quality.

11. Warranty and Support

ISUDAR products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact details provided with your purchase documentation or visit the official ISUDAR website. Keep your proof of purchase for any warranty claims.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.