MatSee Plus WiFi Gate Opener Module

Contents

MatSee Plus Smart WiFi Gate Opener Module User Manual

Model: WiFi Gate Opener Module

1. Product Overview

The MatSee Plus Smart WiFi Gate Opener Module is designed to add smart control capabilities to your existing motorized swing or sliding gate. It allows for remote operation, voice control, scheduling, and real-time monitoring through the Tuya or Smart Life application. This module connects to your gate motor via dry contact and operates on AC 110-240V.

Package Contents

  • Smart WiFi Gate Opener Module
  • 5m Sensor Cable
  • 0.5m Signal Cable
  • Mounting Hardware (screws, wall plugs)
  • User Manual
Contents of the MatSee Plus Smart WiFi Gate Opener Module box, including the module, cables, and mounting hardware.

Image: Contents of the MatSee Plus Smart WiFi Gate Opener Module box.

2. Important Notes Before Installation

  • This device is not compatible with Home Assistant.
  • Ensure your gate motor operates on 100-240VAC voltage.
  • The module supports only 2.4GHz WiFi networks.

Compatibility Check

Before installation, verify your gate controller's compatibility. Use pliers to momentarily short-circuit the wall button terminals on your gate opener. If the gate opens or closes, the MatSee Plus Smart WiFi Gate Opener Module is compatible.

Diagram illustrating how to test gate opener compatibility by short-circuiting the wall button terminals.

Image: Compatibility test for your gate opener.

3. Setup and Installation

Physical Installation and Wiring

  1. **Power Connection**: Connect the AC 110-240V power supply to the 'Input AC' terminals (L and N) on the module.
  2. **Motor Connection**: Connect the signal cable from the module's 'Signal Cable' terminals (S3 and S4) to your gate motor's wall button terminals. This connection uses a dry contact. The signal cable acts as a parallel connection to your gate's existing open/close button.
  3. **Sensor Connection**: Connect the provided 5m sensor cable to the 'Signal Cable' terminals (S1 and S2) on the module. The wire order for the sensor does not matter.
  4. **Mounting**: Secure the module and sensor components in appropriate locations using the provided mounting hardware. Ensure the sensor parts are aligned to detect the gate's open/closed status.
Wiring diagram for the MatSee Plus Smart WiFi Gate Opener Module, showing connections for AC power, motor, and sensor.

Image: Wiring diagram for the Smart WiFi Gate Opener Module.

Diagram showing how to connect the sensor cable to the module and how the sensor detects gate status.

Image: Sensor connection and functionality.

App Pairing

  1. **Download App**: Download the Tuya Smart or Smart Life app from your smartphone's app store (Android or iOS).
  2. **Power On**: Connect the module to power. The indicator light on the module should start blinking, indicating it's in pairing mode. If not, press and hold the pairing button on the module until it blinks rapidly.
  3. **Add Device**: Open the app, tap 'Add Device' or the '+' icon. The app should automatically discover the 'WiFi Door Opener'.
  4. **Confirm**: Follow the on-screen prompts to confirm the device and connect it to your 2.4GHz WiFi network.
  5. **Test Functionality**: Once paired, test the open/close function and sensor detection within the app.

Video: Demonstration of app pairing and sensor operation.

4. Operating Instructions

Remote Control via App

Once the module is successfully paired with the Tuya Smart or Smart Life app, you can open or close your gate remotely from anywhere with an internet connection. The app will display the current status of your gate (opened or closed).

Screenshot of the Tuya/Smart Life app interface showing remote control of a gate.

Image: Remote control via Tuya/Smart Life app.

Voice Control

Integrate the module with voice assistants like Amazon Alexa or Google Home for hands-free operation. Once linked, you can use voice commands such as "Alexa, close the gate, please" or "Hey Google, open the gate."

Image depicting voice control of a gate using Amazon Alexa and Google Home devices.

Image: Voice control with Alexa and Google Home.

Timing Function and Scheduling

Set up schedules within the app for automatic gate operation. For example, you can program the gate to open at a specific time in the morning and close in the evening.

Screenshot of the app's scheduling interface for automatic gate operation.

Image: App schedule function for automatic gate operation.

Alert Message Settings

Configure various alert messages in the app settings to stay informed about your gate's status:

  • Close reminder: Receive notifications if the gate is left open.
  • Alarm when door is open for some time: Get an alert if the gate remains open beyond a set duration.
  • Open reminder: Be notified when the gate opens.
  • Timeout Alarm: Set a maximum time for the gate to be open before an alarm is triggered.
  • Run Times: Adjust the duration of the gate's open/close cycle.
Screenshot of app settings for alert messages, including close reminder, open reminder, and timeout alarm.

Image: App settings for alert messages.

Device Sharing

You can share control of the gate opener module with family members. They will need to register a Tuya or Smart Life account, and then you can authorize device control to them via the "Share Device" option in the app.

Image showing the device sharing feature in the app, allowing multiple family members to control the gate.

Image: Device sharing feature in the app.

5. Maintenance

The MatSee Plus Smart WiFi Gate Opener Module is designed for reliable operation with a strict quality control system. To ensure optimal performance:

  • Keep the module and sensor clean and free from dust or debris.
  • Ensure all wiring connections remain secure.
  • Regularly check the sensor's alignment to ensure accurate gate status detection.
  • Keep the module in a dry environment, away from direct moisture or extreme temperatures.
Image showing product testing and quality control processes.

Image: Product testing and quality control.

6. Troubleshooting

  • **Device not pairing**: Ensure your WiFi network is 2.4GHz. The module does not support 5GHz WiFi. Make sure the module is in pairing mode (indicator light blinking rapidly).
  • **Gate not responding**: Verify all wiring connections (power, motor, sensor) are correct and secure. Confirm the gate opener is compatible by performing the short-circuit test.
  • **App shows incorrect status**: Check the alignment and functionality of the magnetic sensor. Ensure the sensor parts are close enough when the gate is closed and separated when open.
  • **Voice control not working**: Ensure the module is correctly linked to your Alexa or Google Home account within the Tuya Smart/Smart Life app. Check your voice assistant's settings and internet connection.
  • **Limited WiFi range**: If your gate is far from your WiFi router (e.g., 20 meters), consider using a WiFi extender to improve signal strength at the module's location.

7. Specifications

FeatureSpecification
Brand NameMatSee Plus
ModelWiFi Gate Opener Module
Power SourceAC
Input VoltageAC 110-240V 50/60Hz
OutputNo (Dry contact)
Wireless TypeWi-Fi (2.4GHz only)
Communication MethodWi-Fi
APP NameTuya, Smart Life
Voice ControlGoogle Home, Amazon Alexa
Supported OSAndroid, iOS
MaterialABS, PC
Module Dimensions46mm x 46mm x 18mm (Mini Size)
CompatibilitySwing Gate and Sliding Gate Motor
Connect TypeDry contact
CertificationCE, RoHS
OriginMainland China
Battery IncludedNo
Inbox AdaptorYes
Package Weight0.25 kg
Package Dimensions18cm x 15cm x 5cm

8. User Tips

  • **Sensor Placement**: While the sensor cable is long, ensure the magnetic sensor components are mounted securely and within close proximity to each other when the gate is closed for accurate status detection. Consider if the sensor needs to be waterproof if installed outdoors.
  • **Gate Type**: This module is designed for both swing and sliding gates. For dual-leaf swing gates, ensure your motor system has a single control input for opening/closing that the dry contact can trigger.
  • **Dry Contact Clarification**: The 'signal cable' terminals (S3/S4) provide a normally open dry contact closure, which should be connected in parallel to your gate opener's manual push-button terminals. This simulates a button press.

9. Warranty and Support

For any technical assistance or support, please refer to the contact information provided by your retailer or the manufacturer. The product is certified with CE and RoHS standards, indicating compliance with health, safety, and environmental protection directives.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.