1. Introduction
Thank you for choosing the DEKO MMA 160/200 AMP DC Inverter ARC Welder. This machine is designed for home DIY and general repairing work, offering efficient and reliable welding performance. Featuring IGBT power device technology, it ensures easy arc start, stable welding arc, and a deep weld pool for quality results. Its lightweight and compact design make it easy to carry and store, while built-in protection systems ensure safe operation.

Figure 1: DEKO DKA Series Inverter Welding Machine
2. Safety Information
WARNING: Welding can be dangerous. Always follow safety precautions to prevent injury or death.
- Electric Shock: Welding current can kill. Do not touch live electrical parts. Wear dry, insulating gloves.
- Fumes and Gases: Welding fumes and gases can be hazardous to your health. Keep your head out of the fumes. Use enough ventilation or exhaust at the arc to keep fumes and gases away from the breathing zone.
- Arc Rays: Arc rays can injure eyes and burn skin. Wear a welding helmet with a proper shade of filter lens to protect your face and eyes when welding or watching. Wear appropriate clothing to protect your skin.
- Fire and Explosion: Welding can cause fire or explosion. Keep flammable materials away from the welding area. Have a fire extinguisher nearby.
- Burns: Hot metal can cause severe burns. Do not touch hot parts with bare hands.
This welder is equipped with multiple protection features for enhanced safety:
- Over-Voltage Protection
- Under-Voltage Protection
- Over-Current Protection
- Overload Protection
- Over-Heat Protection

Figure 2: Built-in Protection Features
3. Package Contents
Upon unpacking, please verify that all items listed below are included and undamaged:
- (1) DEKO MMA 160/200 Inverter Welding Machine
- (1) Arc Welding Ground Clamp
- (1) Stick Welding Rod Electrode Holder
- (1) User Manual

Figure 3: Package Contents and Key Features
4. Product Overview
The DEKO MMA Inverter Welder features a user-friendly design with essential controls and indicators for efficient welding. Refer to the diagram below for component identification.

Figure 4: Welder Front Panel and Rear View
- Digital Display: Shows the current welding amperage.
- Current Adjustment Knob: Used to set the desired welding current (20-200A).
- Power Switch: Turns the machine ON/OFF.
- Output Terminals: Connect the electrode holder and ground clamp.
- Cooling Fan: Located at the rear, ensures efficient heat dissipation during operation.
5. Setup
- Power Connection: Ensure the welder is connected to a stable 220V-240V AC power supply.
- Ground Clamp Connection: Connect the ground clamp cable to the negative (-) output terminal on the welder. Securely attach the ground clamp to the workpiece or welding table, ensuring good electrical contact.
- Electrode Holder Connection: Connect the electrode holder cable to the positive (+) output terminal on the welder. Insert the appropriate welding electrode into the electrode holder.
- Electrode Selection: Choose an electrode with a diameter suitable for your welding task and current setting. The welder supports electrode diameters from 1.6mm to 4.0mm (specific range depends on model, see specifications).
6. Operating Instructions
- Turn On: Flip the power switch to the 'ON' position. The digital display will illuminate.
- Adjust Current: Use the current adjustment knob to set the desired welding amperage. The digital display will show the selected current.
- Welding Process:

Figure 5: Welding Arc Characteristics
- Start Arc Easily: The inverter technology allows for quick and easy arc ignition.
- Stable Welding Arc: Maintain a consistent arc length for a stable welding process.
- Deep Weld Pool: Achieve good penetration and a strong weld.
- Suitable Materials: This welder is suitable for welding various materials, including:
- Stainless Steel
- Iron
- Copper
- Carbon Steel
- Alloy Steel
- Copper Alloy

Figure 6: Weldable Material Types
- Finish Welding: Once welding is complete, turn off the machine and allow it to cool down before handling.

Figure 7: Easy Current Adjustment
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your welding machine.
- Cleaning: Periodically clean the cooling vents to prevent dust buildup, which can hinder heat dissipation. Use compressed air to gently clear debris. Wipe the exterior of the machine with a dry cloth.
- Cable Inspection: Regularly inspect all cables (power, ground, electrode holder) for any signs of damage, fraying, or loose connections. Replace damaged cables immediately.
- Storage: Store the welder in a dry, clean environment, away from moisture and extreme temperatures.
- Electrode Holder and Ground Clamp: Ensure these accessories are clean and free from spatter for good electrical contact.
8. Troubleshooting
If you encounter issues with your welder, refer to the following common problems and solutions:
- Machine Not Turning On:
- Check the power cable connection.
- Ensure the power switch is in the 'ON' position.
- Verify the power supply voltage is within the specified range (220V-240V).
- No Arc / Weak Arc:
- Check if the ground clamp is securely attached to the workpiece.
- Ensure the electrode is properly inserted into the holder.
- Adjust the current setting to a higher amperage.
- Verify the electrode type and diameter are suitable for the material and current.
- Overheat Protection Activated:
- If the machine stops welding and a warning indicator lights up, it may be due to overheating.
- Allow the machine to cool down. The cooling fan will continue to operate.
- Ensure cooling vents are not blocked and there is adequate ventilation around the machine.
- Reduce the duty cycle or welding time.
- Other Protection Features (Over-Voltage, Under-Voltage, Over-Current, Overload):
- If any of these protections activate, the machine will temporarily stop operation to prevent damage.
- Identify and rectify the cause (e.g., unstable power supply, excessive current draw).
- The machine should resume normal operation once the condition is resolved.
9. Specifications
| Feature | MMA-160AE | MMA-200AE |
|---|---|---|
| Model | DKA-160 | DKA-200 |
| Power Voltage | AC 1-230V±15% | |
| Rated Input Capacity | 5.8 kVA | 7.8 kVA |
| Efficiency | 85% | |
| Duty Cycle | 40% | 60% |
| Insulation Degree | F | |
| Current Range | 20-160A | 20-200A |
| Usage | Welding Task | |
| Input Voltage | 220V-240V | |
| No-load Voltage | 60V | |
| Protection Degree | IP21S | |
| Dimensions (L*W*H) | 23.5cm * 12cm * 19cm | |
| Input Power | 5.8KW | 7.8KW |
| Power Factor | 0.93 | |
| Electrode Diameter | 1.6-3.2mm | 1.6-4.0mm |
| Net Weight (N.W.) | 3.25kg | |
| Pilot Arc Current | 60A | |
| Origin | Mainland China | |
10. User Tips
- This product is categorized for general welding tasks, making it suitable for a wide range of applications.
- Its compact dimensions (23.5cm x 12cm x 19cm) and lightweight design (3.25kg) contribute to its portability and ease of storage, ideal for home users and beginners.
- The welder features a 60A pilot arc current, which aids in easier arc starting and stable welding performance.
- For optimal performance and safety, always ensure proper ventilation and wear appropriate personal protective equipment (PPE) during operation.
11. Warranty and Support
The DEKO MMA 160/200 AMP DC Inverter ARC Welder comes with a 2-Year Limited Warranty. DEKO also provides Free Lifetime Technical Support for this product. For any technical assistance or warranty claims, please contact DEKO customer service.

Figure 8: DEKO Quality Service