Safety Is Always The First Priority!
READ ALL INSTRUCTIONS BEFORE USE
- 📖
For your safety, the safety of others, and to avoid any damage to the product and your vehicle, CAREFULLY READ AND MAKE SURE YOU FULLY UNDERSTAND ALL THE SAFETY INSTRUCTIONS AND MESSAGES IN THIS MANUAL BEFORE OPERATING. You must also read the vehicle's service manual, and observe the stated precautions or instructions before and during any test or service procedure.
- ⚡
Keep yourself, your clothing and other objects away from moving or hot engine parts and avoid contact with electrical connections.
- 💨
ONLY OPERATE THE VEHICLE IN A WELL-VENTILATED AREA, as the vehicle produces carbon monoxide, a toxic and poisonous gas, and particulate matter when the engine is running.
- 👓
ALWAYS WEAR approved SAFETY GOGGLES to prevent damage from sharp objects and caustic liquids.
- 🚭
DO NOT SMOKE OR HAVE ANY FLAMES NEAR THE VEHICLE when testing. The fuel and battery vapors are highly flammable.
- 📵
DO NOT ATTEMPT TO INTERACT WITH THE PRODUCT WHILE DRIVING. Any distraction may cause an accident.
- 🚫
TURN THE IGNITION OFF BEFORE CONNECTING OR DISCONNECTING THE PRODUCT FROM THE VEHICLE'S DATA LINK CONNECTOR (DLC) to prevent causing damage to the product or vehicle's electronic components.
What's in the Box
The ArtiDiag600S package includes the following items:
- ArtiDiag600 S Unit
- OBD-II Diagnostic Cable
- USB Cable (Type-A to Type-C)
- Quick User Guide
- Carrying Case

Product Overview
Product Layout

- Power / Screen Off Button: Long press to turn on/off or display power options. Short press to wake up/lock the screen.
- DB15 Diagnostic Cable Connector: Used to connect the ArtiDiag600S to the vehicle's Data Link Connector (DLC).
- Five-inch Touch Screen: Main display for interaction.
- OK Button: Confirms current selection or operation.
- Directional Buttons: Used to navigate the menu (Up, Down, Left, Right).
- Return Button: Returns to the previously viewed page.
- USB Type-C Charging Port: For data transfer and charging (5V, 2A).
- Audio Speaker: Provides audio feedback.
Getting Started
Basic Setup
Press and hold the power button for 3 seconds to turn on the ArtiDiag600 S. Follow these steps to configure your device:
- Select System Language: Choose your preferred language from the list.

Figure 3-1: Language Selection - Choose Region and Time Zone: Select the appropriate region and time zone for your location.

Figure 3-2: Region and Time Zone Selection - Configure Wi-Fi Connection: Select a Wi-Fi network from the scanned list and enter the password.

Figure 3-3: Wi-Fi Setup - Log in to TOPDON Account: If you don't have an account, please register with your email.

Figure 3-4: TOPDON Account Login
Connect the ArtiDiag600 S to the Vehicle's DLC
Use the supplied OBD-II diagnostic cable to connect the ArtiDiag600 S to the vehicle's DLC. The vehicle's DLC port is usually located under the dashboard. After proper connection, the VCI icon will change to indicate connection.
Note: Make sure the ignition is always OFF before plugging in the unit.

Turn the Ignition to the "ON" Position
If your vehicle has a keyless start system, press the "Engine Start Stop" button until the car is in "ON" mode. Do not apply the brake while pressing the button, or the car will start instead of entering "ON" mode. The ignition method varies by vehicle model; refer to your vehicle's service manual for details.

You are now ready to start diagnosing the vehicle.
Operating Your ArtiDiag
Home Screen
After logging in, the home screen will display various function icons:

| Icon | Function | Description |
|---|---|---|
| 🚗 | Diagnostics | Performs diagnostic functions including reading/clearing DTCs, viewing data stream, and reading ECU version information. |
| ⚙️ | OBDII/EOBD | Performs emission-related diagnostics for your vehicle. |
| 📊 | I/M Readiness | Quick access to check the status of emission-related systems. |
| 🔧 | Maintenance | Provides 9 maintenance services including Oil Reset, Throttle Adaptation, EPB Reset, Steering Angle Reset, DPF Regeneration, ABS Bleeding, BMS Reset, Injector Coding and TPMS Reset. |
| 🔋 | Battery Voltage | Displays the real-time voltage of your vehicle battery. |
| ☁️ | Update | Updates vehicle-specific diagnostic software if a new version is available. |
| 📁 | Folder | Accesses Reports (System, Fault Code, Data Stream), Live Data Rec, Screenshots, and Screen Rec. |
| 👤 | User Info | Accesses My Profile, Firmware Update, Customer Feedback, Shop Info, System Update and Settings. |
Diagnostics
The Diagnostics module allows you to scan supported vehicle systems (Auto Scan) for Diagnostic Trouble Codes (DTCs) or select an individual system to perform various functions like reading version information, reading/clearing trouble codes, and reading data streams.
Auto Scan and Individual System Diagnostics
To perform Auto Scan or Individual System Diagnostics, you need to identify your vehicle first. Tap Diagnostics from the home screen. You will see VIN and Make at the top of the Diagnostics screen.

Identifying via VIN:
- Auto VIN: The ArtiDiag600 S automatically reads and decodes the Vehicle Identification Number (VIN).
Note: Not all vehicles support automatically reading and decoding the VIN via Auto VIN.
- Enter VIN: Manually enter the vehicle VIN to identify the vehicle.
Identifying via Make:
- Tap Make, and a list of vehicle makes will display.

Figure 4-3: Vehicle Make Selection - Select or enter the make of your vehicle.
Note: A demonstration mode (DEMO option on the Make list) is provided to help you become familiar with the Diagnostics functions.
- Select Automatic/Manual to identify the vehicle.
Auto Scan: Detects supported systems and retrieves DTCs for a complete health check. Performing Auto Scan before and after a repair helps in troubleshooting and validating repairs. Pre and post scan reports allow you to record vehicle condition for comparison.

Button Description:
- Clear DTCs: Tap to clear all retrieved DTCs.
- Report: Tap to save current scan results in report format. (To view saved reports, go to Folder > Reports > System Report.)
Performing Individual System Diagnostics:
Note: Depending on the vehicle make, some functions may not be available.
Read Trouble Code:
- After vehicle identification, select the system to retrieve DTCs.
- Tap Read Trouble Code. ArtiDiag will communicate with the ECU and display DTCs.
- Tap the icon at the right side to open the option menu of a particular DTC.

Figure 4-6: Read Trouble Code Screen
Icon Description:
- 🔍
Tap to search on Google for more information about the DTC.
- 💬
Tap to view the detailed description of the DTC.
- ❄️
Tap to view the freeze frame captured when the DTC occurs.
- 📝
Tap to view the instructive repair measures.
Clear Trouble Code:
- After vehicle identification, select the system to clear DTCs.
- Tap Clear Trouble Code.
- Tap OK when DTCs are cleared.
Note: Clearing DTCs should be performed after repairs. Do NOT start the engine while clearing DTCs.
Live Data:
- After vehicle identification, select the system to read the data stream.
- Tap Live Data. A data stream list displays.

Figure 4-7: Live Data Screen
Icon Description:
- 📈
Tap to display real-time data stream in a wave-pattern graph.
Button Description:
- 📋
Tap to select data streams to be displayed.
- 6️⃣
Tap to display up to 6 data streams in a graph.
- 4️⃣
Tap to combine up to 4 data streams in one graph for easier comparison.
- ⏺️ Record
Tap to record and save real-time data stream information. (To view recorded data streams, go to Folder > Live Data Rec.)
- 📄 Report
Tap to save current data stream values in report format. (To view saved reports, go to Folder > Reports > Data Stream Report.)
Note: If the vehicle must be driven to view the live data stream, always have a second person helping you. Do NOT watch the data stream while driving.
Read Version Information
After vehicle identification, select the system to view ECU version information. Tap Information in the function menu.
OBDII / EOBD Diagnostics
The OBDII / EOBD function performs emission-related diagnostics.
- Tap OBDII/EOBD from the home screen.
- Select communication method: Auto Scan or Protocol.

Figure 4-8: OBDII/EOBD Options - Select a function to continue.

Figure 4-9: OBDII/EOBD Function Menu Note: Depending on the vehicle make, some functions may not be available.
Typical function options include: DTC & FFD, I/M Readiness, Live Data, On-Board Monitor, Component Test, Vehicle Information and Vehicle Status.
- DTC & FFD (Freeze Frame Data): Retrieves and clears DTCs, displays FFD for emission-related systems.
- I/M Readiness: Checks if emission-related systems are operating correctly and ready for I/M testing.

Figure 4-10: I/M Readiness Note: The vehicle should only be considered ready for inspection and allowed to pass emissions if all required tests have been passed.
- Live Data: Displays real-time data and parameters from the vehicle's ECU.
- On-Board Monitor: Displays test results for emission-related powertrain components not continuously monitored.
- Component Test: Helps send control commands to the ECU to test and operate system parts.
- Vehicle Information: Displays VIN, Calibration ID (CID), Calibration Verification Number (CVN), In-use Performance Tracking for Spark Ignition Engine (IUPR), and ECU Name.
- Vehicle Status: Displays vehicle status including Engine, Transmission, Codes Found, MIL Status, Monitors and Protocol.
Maintenance Services
This function provides 9 maintenance services:

- Oil Reset: Resets the oil service lamp and programs oil life change intervals.
- Throttle Adaptation: Initializes throttle actuators after replacement or cleaning.
- EPB Reset: Replaces and resets brake pads.
- Steering Angle Reset: Finds the relative zero position for the steering angle sensor.
- BMS Reset: Resets the car battery control unit after battery replacement.
- TPMS Reset: Resets tire pressure information and turns off the tire pressure MIL.
- DPF Regeneration: Manages DPF regeneration to clear blockages.
- Injector Coding: Writes new injector codes into the car system for correct cylinder injection quantity.
- ABS Bleeding: Checks ABS operating conditions and helps remove trapped air.
To perform a service reset:
- Tap Maintenance from the home screen.
- Select the desired function.
- Identify the vehicle via VIN or Make.
- Follow on-screen instructions.
Battery Voltage
This function displays the real-time voltage of your vehicle battery.

Update
This function allows you to update the vehicle-specific diagnostic software.
- Tap Update from the home screen.
- Tap Download to update or download the software.
Note: You can also tap Select at the top right corner to batch select and update software.
Folder
This function gives access to Reports (All, System Reports, Fault Code Report, and Data Stream Reports), Live Data Rec., Screenshots and Screen Rec.

Button Description:
- 🔍
Tap to search for a particular report.
- 📝
Tap to batch select and delete reports.
Reports: Tap Folder > Reports, then select a report to view details.
Live Data Rec.: Tap Folder > Live Data Rec. to view recorded data stream list. Tap a data stream to play the recorded video.
Screenshots: Tap Folder > Screenshots to view saved screenshots.
Screen Rec.: Tap Folder > Screen Rec. to view saved screen recordings.
Library
- DTC Repair Guide: Provides code-specific information, popular fixes, and repair steps. (Tap Library > DTC Repair Guide, enter DTC in search bar.)
- Technical Service Bulletins: Provides OEM technical service bulletins. (Tap Library > Technical Service Bulletins, select vehicle info, tap Next.)
- DLC Location: Shows a picture of the DLC location for the selected vehicle. (Tap Library > DLC Location, select vehicle info, tap Next.)
- Warning Light Library: Provides information on dashboard warning lights. (Tap Library > Warning Light Library, select a warning light.)
User Info
Accesses My Profile, Firmware Update, Customer Feedback, Shop Info, System Update and Settings.
- My Profile: Change profile photo/alias, view TOPDON ID, change password, delete account.
- Firmware Update: Update firmware if a new version is available.
- Customer Feedback: Write feedback to TOPDON after-sales team.
- Shop Info: Save repair shop information.
- System Update: Update software if a new version is available.
- Settings: Set WLAN, time/date, languages/unit, AutoVIN, check storage, factory reset, view version info, update, view Terms of Service/Privacy Policy, set Auto-Lock time, view tablet info, log out.
AutoVIN: When enabled, ArtiDiag600 S automatically performs AutoVIN for diagnostics once VCI is connected to DLC. Disabled by default.
User Tips
- Ensure the ignition is ON when performing diagnostics.
- Always check for software updates to ensure optimal performance and access to the latest features.
- If you encounter issues with advanced features, verify vehicle compatibility as some functions may be dependent on the car's make, model, and year.
- For specific vehicle models like Renault Kwid 2025 or JAC Grand S3, it's recommended to confirm compatibility with the manufacturer or seller for full feature support.
Troubleshooting (FAQ)
- Q: What should I do if a communication error occurs?
- A: Follow these steps to identify the problem:
- Check if the ignition is ON.
- Check if the ArtiDiag OBD-II diagnostic cable is securely plugged into the vehicle's DLC port.
- Turn the ignition OFF. Turn it on again after 10 seconds and continue the operation.
- Check if the vehicle's control module is defective.
- Q: What special functions does the ArtiDiag600 S support?
- A: ArtiDiag600 S supports 9 maintenance services including Oil Reset, Throttle Adaptation, EPB Reset, Steering Angle Reset, DPF Regeneration, ABS Bleeding, BMS Reset, Injector Coding and TPMS Reset.
- Q: Do I need to update the firmware before using the ArtiDiag600 S for the first time?
- A: Yes. Firmware will automatically update to the latest version. You can also tap User Info > Firmware Update to update the firmware manually.
- Q: Why is the ArtiDiag600 S screen flashing when the engine is working?
- A: That is a normal occurrence caused by electromagnetic interference.
- Q: How do I capture a screenshot?
- A: Swipe down and tap Screenshot, then tap the icon on the screen to capture a screenshot. To view the saved pictures, tap Folder > Screenshots.
Specifications
| Feature | Specification |
|---|---|
| Display Screen | 1280 * 720 Touchable Screen |
| CPU | 4-Core Processor, 1.8 GHz, Android 11.0 |
| RAM | 2G |
| ROM | 32G |
| Battery | 3350 mAh/3.7 V |
| Input Voltage Range | 9-18 V |
| Working Temperature | -10 °C to 50 °C (14 °F to 122°F) |
| Storage Temperature | -20 °C to 70 °C (-4 °F to 158°F) |
| Dimension (L x W x H) | 8.9*5.3*1.56 in. (225.15*135.15*39.7 mm) |
| Net Weight | 578 g (20.39 oz) |
| Multilingual Support | English, French, German, Spanish, Portuguese, Russian, Japanese, Italian, Simplified/Traditional Chinese, Korean, Polish, Turkish |
| FCC ID | 2AVYW-AD500O3 |
| Certification | CE, RoHS |
Warranty
TOPDON One Year Limited Warranty
TOPDON warrants to its original purchaser that the company's products will be free from defects in material and workmanship for 12 months from the date of purchase (Warranty Period).
For defects reported during the Warranty Period, TOPDON will either repair or replace the defective part or product according to its technical support analysis and confirmation.
TOPDON shall not be liable for any incidental or consequential damages arising from the device's use, misuse, or mounting.
If there is any conflict between the TOPDON warranty policy and local laws, the local laws shall prevail.
This limited warranty is void under the following conditions:
- Misused, disassembled, altered or repaired by unauthorized stores or technicians.
- Careless handling and/or improper operation.
Notice: All information in this manual is based on the latest information available at the time of publication and no warranty can be made for its accuracy or completeness. TOPDON reserves the right to make changes at any time without notice.
Compliance Information
Regulatory Compliance
FCC ID: 2AVYW-AD500O3
IC: 32511-AD500O3, HVIN: ArtiDiag600S
FCC & ISED Statement
This device complies with Part 15 of the FCC Rules [and contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS standard(s)].
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation of the device.
L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
- l'appareil ne doit pas produire de brouillage, et
- l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment.
FCC VOC
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
In case this equipment has to subject to FCC/IC SAR (Specific Absorption Rate) exposure test, this equipment is designed to meet the requirements for exposure to radio waves established by the FCC and ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the body or on the head, with no separation.
FCC Caution:
The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
IC Caution:
- The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
- for devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate.
- les dispositifs fonctionnant dans la bande 5150-5250 MHz sont réservés uniquement pour une utilisation à l'intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux;
- le gain maximal d'antenne permis (pour les dispositifs utilisant la bande 5725-5850 MHz) doit se conformer à la limite de p.i.r.e. spécifiée pour l'exploitation point à point et non point à point, selon le cas.
Contact Information
- TEL: +86-755-21612590, +1-833-629-4832 (North America), +34 930 038 094 (Europe)
- EMAIL: SUPPORT@TOPDON.COM
- WEBSITE: WWW.TOPDON.COM
- FACEBOOK: @TOPDONOFFICIAL
- X: @TOPDONOFFICIAL
