1. Introduction
This manual provides detailed instructions for the safe and effective operation of your Huepar L011G Green Cross Line Laser Level. Please read this manual thoroughly before use and keep it for future reference. The Huepar L011G is a versatile laser tool designed for various leveling and alignment tasks, featuring a bright green laser, self-leveling capabilities, and a rechargeable Li-ion battery.
2. Package Contents
Verify that all items listed below are included in your package:
- 1 x Huepar Cross Line Laser Level L011G
- 1 x Rechargeable Li-ion Battery (3.7V / 5200mAh)
- 1 x Type-C Power Cord
- 1 x Magnetic Bracket
- 1 x User Manual
- 1 x Portable Carrying Bag
3. Product Overview
Familiarize yourself with the components of your Huepar L011G laser level:
- Laser Window: Emits the laser beams.
- 1/4"-20 Mount Thread: For attaching to tripods or other mounting accessories.
- Pendulum / Transit Lock: Secures the pendulum for manual mode or transport.
- Power Button: Turns the device on/off.
- Pulse Mode Button: Activates/deactivates pulse mode.
- Power Indicator: Shows the device's power status.
- Pulse Mode Indicator: Lights up when pulse mode is active.
- Li-ion Battery Pack: Removable and rechargeable power source.
- Type-C Charging Port: For charging the battery.
4. Specifications
| Feature | Specification |
|---|---|
| Laser Lines | 1 x 180° Horizontal Line + 1 x 120° Vertical Line |
| Laser Class | Class 2 (IEC/EN60825-1/2014), <1mW power output |
| Laser Wavelength | 505-520nm |
| Horizontal/Vertical Accuracy | ±1/9in at 33ft (±3mm/10m) |
| Leveling/Compensation Range | ±3° |
| Leveling Time | 3s |
| Working Distance | 98 feet (30m) (100 LUX); 165 feet (50m) with Huepar Laser Detector LR-5RG / LR-6RG |
| Operating Time | 8 hours continual use with all laser beams on |
| Power Source | One 3.7V / 5200mAh Li-ion Battery |
| Mount Size | 1/4"-20 |
| IP Rating | IP54 (dust-proof, waterproof, shockproof) |
| Operation Temperature Range | 14℉ ~ 104℉ (-10℃~ 40℃) |
| Storage Temperature Range | -4℉ ~ 158℉ (-20℃~ 70℃) |
| Size | 10.4*7.8*6.5cm |
| Certification | CE, FCC, RoHS |
5. Setup
5.1. Battery Installation and Charging
- Ensure the laser level is turned off.
- Locate the battery compartment on the side of the device.
- Insert the 3.7V / 5200mAh Li-ion battery pack, ensuring correct polarity.
- To charge, connect the provided Type-C power cord to the charging port on the battery pack and a suitable USB power source. The battery can be charged while installed in the device or separately.
- Monitor the 4 battery indicators on the Li-ion battery pack to check the current battery level and charging status.
5.2. Mounting the Laser Level
The Huepar L011G offers flexible mounting options:
- Tripod Mounting: Use the 1/4" female thread on the bottom of the laser level to attach it to a standard tripod.
- Magnetic Bracket: The included magnetic bracket features two strong magnets for attachment to metal surfaces. It also allows for 360° rotation of the laser level. The bracket has 1/4"-20 and 5/8"-11 mounting threads for additional versatility with tripods or laser mounting poles.
6. Operating Instructions
6.1. Power On/Off
Press the Power Button to turn the laser level on or off.
6.2. Self-leveling Mode
- Slide the Pendulum / Transit Lock to the unlocked position.
- The self-leveling mode is now enabled. The laser level will automatically level itself within a ±3° range.
- If the device is placed on a surface that is out of the ±3° self-leveling range, the laser beams will blink rapidly, and the device will emit a beep to indicate it cannot self-level. Adjust the device's position until it is within range.
6.3. Manual Mode (Tilt Mode)
- Slide the Pendulum / Transit Lock to the locked position.
- The laser level is now in manual mode, allowing you to project laser lines at any desired angle.
- In manual mode, the laser beams will blink every 3-5 seconds to remind you that it is not self-leveling.
6.4. Line Switching
Short press the operation button (often the same as the Power Button or a dedicated button) to cycle through the available laser line combinations:
- Horizontal line only
- Vertical line only
- Both horizontal and vertical lines (cross lines)
6.5. Pulse Mode
- After powering on the device, short press the Pulse Mode Button on the keypad to enable the pulse mode function. The Pulse Mode Indicator will light up.
- In pulse mode, the laser beams will appear dimmer to the naked eye but are optimized for use with a Huepar Line Laser Detector (e.g., LR-6RG / LR-5RG / LR-8RG).
- Pulse mode extends the working range up to 165 feet (50m) in brighter working conditions when used with a compatible Huepar Laser Detector.
- Ensure pulse mode is active when using a receiver for optimal detection.
7. Maintenance
- Cleaning: Keep the laser window clean. Use a soft, dry cloth to wipe the device. Do not use abrasive cleaners or solvents.
- Storage: When not in use, store the laser level in its portable carrying bag to protect it from dust, moisture, and impacts. Ensure the pendulum is locked before storage or transport.
- Durability: The device has an IP54 rating, making it dust-proof and waterproof, suitable for various working conditions.
8. Troubleshooting
- Laser beams are blinking rapidly and beeping: This indicates the device is in self-leveling mode but is positioned outside its ±3° leveling range. Adjust the device's position until it is within the acceptable range.
- Laser beams are blinking every 3-5 seconds: This is normal behavior for manual (tilt) mode. It serves as a reminder that the pendulum is locked, and the device is not self-leveling.
- Laser beams appear dim in pulse mode: This is normal. Pulse mode optimizes the laser for detection by a compatible Huepar Line Laser Detector, making it appear dimmer to the naked eye.
- Device does not power on: Check if the battery is properly installed and fully charged. Recharge the battery if necessary.
- Cannot switch between lines: Ensure the device is powered on and try pressing the operation button firmly.
9. User Tips
- Conserving Battery: To extend battery life, use only the necessary laser lines for your task. The device allows you to switch between horizontal, vertical, or both.
- Angled Applications: For projects requiring angled lines (e.g., installing handrails), always use the manual mode by locking the pendulum. Remember the laser will blink to indicate it's not self-leveling.
- Outdoor Use: For outdoor or bright indoor conditions, activate pulse mode and use a compatible Huepar laser receiver to extend the working distance and improve visibility.
10. Safety Information
WARNING: Avoid direct exposure of the laser beam to the eyes. This product uses a Class 2 laser (<1mW power output, 505-520nm wavelength). Direct eye exposure can cause temporary or permanent eye injury.
- Do not stare directly into the laser beam.
- Do not intentionally direct the laser beam at people or animals.
- Do not use optical instruments (e.g., binoculars, telescopes) to view the laser beam.
- Keep the device out of reach of children.
- Do not attempt to modify or disassemble the laser level. Unauthorized modifications can result in hazardous laser radiation exposure and will void the warranty.
- Use the device only for its intended purpose as described in this manual.
11. Warranty and Support
The Huepar L011G Green Cross Line Laser Level comes with a two-year warranty, as indicated by the manufacturer. For warranty claims, technical support, or inquiries about spare parts (such as additional batteries), please contact the Huepar Official Store or your authorized dealer. Please retain your proof of purchase for warranty service.
