Introduction
The Radtel Tri-Band Flexible Antenna is designed to provide broad frequency coverage and enhanced reception for compatible two-way radios. Its flexible design ensures durability and portability, making it an ideal accessory for various communication needs. This manual provides essential information for the proper setup, operation, and maintenance of your antenna.

Setup
Follow these steps to properly attach the antenna to your compatible two-way radio:
- Unpack the Antenna: Carefully remove the antenna from its packaging.
- Identify Connector Type: The Radtel Tri-Band Flexible Antenna features an SMA-Female connector. Ensure your radio has a compatible SMA-Male connector.
- Attach to Radio: Align the antenna's SMA-Female connector with the SMA-Male connector on your radio. Gently screw the antenna clockwise until it is finger-tight. Do not overtighten, as this can damage the connectors.
- Verify Connection: Ensure the antenna is securely attached before operating your radio.

Operating
The Radtel Tri-Band Flexible Antenna is designed for optimal performance across its specified frequency ranges. Once connected, your radio will utilize the antenna for transmitting and receiving signals.
- Frequency Coverage: This antenna supports 136-174 MHz (VHF), 200-260 MHz, and 400-520 MHz (UHF) bands.
- High Gain: The antenna features a high gain design (2.15dBi) to enhance signal strength and reception, particularly beneficial in outdoor environments.
- Flexible Design: The soft whip design allows for flexibility, reducing the risk of damage during use and transport.


Maintenance
To ensure the longevity and optimal performance of your Radtel Tri-Band Flexible Antenna, follow these maintenance guidelines:
- Cleaning: Wipe the antenna with a soft, damp cloth to remove dust and dirt. Avoid using harsh chemicals or abrasive materials.
- Storage: When not in use, store the antenna in a clean, dry place. Its flexible nature allows for easy coiling, but avoid sharp bends or kinks that could damage the internal wiring.
- Inspection: Periodically check the SMA-Female connector for any signs of wear, corrosion, or damage. Ensure it remains clean and free of debris.
- Avoid Extreme Conditions: While durable, prolonged exposure to extreme temperatures or direct sunlight can affect the antenna's material over time.
Troubleshooting
If you experience issues with your antenna, consider the following common troubleshooting steps:
- Poor Reception/Transmission:
- Ensure the antenna is securely connected to the radio. A loose connection can significantly degrade performance.
- Verify that your radio is set to the correct frequency band for the antenna.
- Check for any physical damage to the antenna or its connector.
- Environmental factors (e.g., dense buildings, terrain, other radio interference) can affect signal quality. Try moving to a different location.
- Antenna Not Fitting:
- Confirm your radio's connector type is SMA-Male. This antenna is designed for SMA-Female connections.
Specifications
| Feature | Specification |
|---|---|
| Frequency Range | 136-174 MHz (VHF), 200-260 MHz, 400-520 MHz (UHF) |
| Connector Type | SMA-Female |
| Antenna Length | 35 cm (14 inches) |
| Weight | 38g |
| Gain | 2.15 dBi |
| Material | Flexible (Soft Whip) |
| Compatible Radtel Models | RT-330, RT-4D, RT-493, RT-495, RT-590, RT-600, RT-630, RT-68, RT-4B, RT-470, RT-470L, RT-470x, RT-730, RT-750, RT-760, RT-770, RT-780, RT-900, RT-910, RT-910B, RT-860, RT-860G, RT-880, RT-880G, RT-830, RT-890 |
| Other Compatible Radios | Baofeng UV-5R, UV-82, BF-F8HP, UV-5R V2+, certain Kenwood, Wouxun, and Yaesu two-way radios. |

User Tips
- Flexibility for Convenience: The flexible design of this antenna makes it easy to store and transport without fear of breakage, unlike rigid antennas.
- Check SWR: For optimal performance, especially if you are experiencing poor signal quality, it is recommended to check the Standing Wave Ratio (SWR) of your antenna setup. High SWR can indicate a mismatch or a faulty connection.
- Broad Compatibility: This antenna is designed to work with a wide range of two-way radios. If your specific model isn't listed, ensure it has an SMA-Male connector and operates within the antenna's frequency bands.
Frequently Asked Questions (FAQ)
- Q: Is this antenna suitable for the Radtel RT-950 PRO?
- A: While the RT-950 PRO is not explicitly listed, this antenna is compatible with many Radtel models. Please verify that your RT-950 PRO uses an SMA-Male connector and operates within the antenna's frequency ranges (136-174 MHz, 200-260 MHz, 400-520 MHz).
- Q: Does this antenna cover 144-220-430 MHz?
- A: Yes, this antenna covers the 144 MHz (136-174 MHz), 220 MHz (200-260 MHz), and 430 MHz (400-520 MHz) bands, making it suitable for tri-band radios operating on these frequencies.
- Q: Is the Radtel RT-590 compatible with this antenna?
- A: Yes, the Radtel RT-590 is listed as a compatible model for this antenna.
Support
For further assistance, technical support, or inquiries regarding your Radtel Tri-Band Flexible Antenna, please contact Radtel customer service through their official channels. Ensure you have your product model and any relevant details ready when contacting support.