Veinasa CXS02B-N

Contents

Veinasa-CXS02B-N Ultrasonic Wind Speed and Direction Meter User Manual

Model: CXS02B-N | Brand: Veinasa

1. Introduction

The Veinasa-CXS02B-N ultrasonic wind speed and direction meter is a measuring instrument that utilizes ultrasonic waves to travel through the air to accurately measure wind speed and direction. Designed with a low-power chip, it consumes only 0.2W, making it particularly suitable for solar or battery-powered environments where energy efficiency is crucial. This device features a compact and robust structure, with an optional temperature and air pressure module available. Its shell is constructed from metal cast aluminum and ASA, ensuring durability and adaptability for various environmental applications.

Main Features

  • Maintenance-free operation and long service life.
  • No moving parts, ensuring zero wear and tear.
  • Constructed with engineering plastic or aluminum alloy casing for a lighter design.
  • Utilizes ultrasonic probe reflection type for a compact structure.
  • Incorporates acoustic phase compensation technology for higher precision measurements.

Applications

The Veinasa-CXS02B-N is primarily used in:

  • Family weather stations.
  • Farmland meteorological detection.
  • Tower crane wind speed monitoring.
  • Photovoltaic power plants and hydraulic engineering.
  • Ship, boat, and other marine applications.
Diagram showing various applications of the ultrasonic wind sensor
Wide application range including domestic weather stations, agrometeorological detection, and tower crane wind speed monitoring.

2. Specifications

Parameter Measurement Range Accuracy Resolution
Wind Speed 0 - 40 m/s ±3% (@25℃) 0.1 m/s
Wind Direction 0 - 359° ±3° (@25℃) 1°
Digital Output RS232, RS485, SDI-12 (Choose one)
Communication Baud Rate 4800 - 19200
Protocol NMEA-0183
Protection Level IP65
Operating Temperature -40℃ - +60℃
Storage Temperature -50℃ - +80℃
Working Humidity 0 - 100%
Power Demand VDC: 5-24V
Power Consumption 0.2W
Dimensions / Weight Ø84×120mm / 0.38kg
Material Aluminum alloy/ASA (default)
Dimensional drawing of the Veinasa-CXS02B-N sensor
Product dimensions: Diameter 82mm, Height 108mm, Base Diameter 49mm.

3. Setup and Installation

The Veinasa-CXS02B-N is designed for easy installation. The bracket is optional and not provided by default. Ensure the sensor is mounted securely in a location free from obstructions that could interfere with wind measurements.

Physical Installation

Diagram showing two installation methods for the Veinasa-CXS02B-N sensor
The diagram illustrates two common installation methods for the sensor, highlighting its compact size, durable ASA plastic shell, low power consumption (0.2W), CE verification, and IP65 waterproof interface.

Electrical Connection

The sensor requires a DC 5-24V power supply. It offers various digital output options including RS232, RS485, and SDI-12, and communicates using the NMEA-0183 protocol. The waterproof interface (IP65 rated) ensures reliable operation in challenging conditions.

The following diagrams illustrate common connection scenarios:

Connection diagram for Veinasa-CXS02B-N with various data loggers and microcontrollers
One-stop solution connection diagram showing how to integrate the sensor with a data logger, microcontroller (ESP32, Arduino), or PLC using wired connections, GPRS, Ethernet, or Wi-Fi.
Physical Port Definition (NMEA-0183)
  • Start bit: 1 bit
  • Stop bit: 1 bit
  • Data bits: 8 bits
  • Check bit: None
  • Baud rate: 9600 bps

4. Operating Instructions

The Veinasa-CXS02B-N outputs data in ASCII format following the NMEA-0183 protocol. Ensure your data acquisition system is configured to interpret this protocol correctly.

Data Frame Format (ASCII)

Example: $WIMWV,180,R,0.01,M,A*06<CR><LF>

  • Fixed frame head: $WIMWV
  • Wind direction: 0-359°
  • R: Relative wind speed (T for real wind speed)
  • Wind speed: 0-60 m/s
  • Units: M = m/s (default), K = km/h, N = knots
  • Checksums: Between "$" and "*", a bitwise exclusive OR value of all characters (excluding these two characters).
  • End of frame: Carriage return (0x0D) and Line Feed (0x0A).

Checksum Calculation (Appendix)

The checksum is calculated as follows:

unsigned char NMEA_CheckSum(unsigned char *pStr, unsigned int DStrlen)
{
  unsigned char ChkSum = 0;
  unsigned int i = 0;
  while(DStrlen--)
  {
    ChkSum ^= pStr[i];
    i++;
  }
  return ChkSum;
}
      

5. Maintenance

The Veinasa-CXS02B-N is designed for low maintenance due to its lack of moving parts, which eliminates wear and tear and contributes to a long service life. To ensure optimal performance:

  • Regular Cleaning: Periodically inspect the sensor for any accumulation of dirt, dust, or debris on its surface. Gently clean with a soft, damp cloth if necessary. Avoid using abrasive materials or harsh chemicals.
  • Connection Check: Ensure all electrical connections remain secure and free from corrosion. The IP65 waterproof rating protects against ingress, but physical damage to cables or connectors should be addressed promptly.
  • Environmental Considerations: While robust, avoid exposing the sensor to extreme physical impacts or prolonged submersion beyond its IP65 rating.

6. Troubleshooting

  • No Data Output:
    • Verify the power supply (DC 5-24V) is correctly connected and providing adequate voltage.
    • Check the physical port definition (Start bit, Stop bit, Data bits, Check bit, Baud rate) on your data acquisition system matches the sensor's specifications (e.g., 9600bps).
    • Ensure the correct digital output (RS232, RS485, or SDI-12) is selected and configured.
    • Inspect the cable connections for any damage or loose wiring.
  • Incorrect Readings:
    • Ensure the sensor is mounted in an unobstructed location, away from structures or objects that could create turbulence or block wind flow.
    • Verify the data frame format and checksum calculation in your software matches the NMEA-0183 protocol specified in the operating instructions.
    • Check for any physical damage or debris on the sensor's ultrasonic transducers.
  • Need for Additional Parameters:
    • If you require additional parameters such as air pressure, temperature, or relative humidity, consider the Veinasa-THPRW-03 model, which integrates these functions.
  • Data Collection Issues:
    • If you are using your own data logger, ensure you have the correct communication protocol from Veinasa.
    • If you do not have a data logger, Veinasa can provide one with English software for reading, inquiring, and downloading data.

7. User Tips

  • The robust design of the Veinasa-CXS02B-N ensures durability and reliable performance in various environmental conditions.
  • This sensor is ideal for solar or battery-powered setups due to its exceptionally low power consumption of only 0.2W.
  • For marine applications, ensure the NMEA-0183 protocol is correctly configured with your ship's systems for seamless integration.

8. Warranty and Support

Warranty Information

The Veinasa-CXS02B-N comes with a 1-year warranty. For detailed warranty terms and conditions, please contact Veinasa customer support.

Customer Support

For any inquiries, technical assistance, or support, please contact Sichuan Weinasa Technology Co., Ltd. using the information below:

  • Company: Sichuan Weinasa Technology Co., Ltd
  • Phone: +86-0816-2712180
  • Fax: +86-0816-2712180
  • E-mail: weinasa@weinasa.com
  • WhatsApp/Skype/Wechat: +86-18140352980
  • Address: Room 401, Keyuan NO.1 road, Branch Chong Park, Mianyang City, Sichuan Province

A comprehensive user manual is also available in PDF format for further reference: View User Manual (PDF)

© 2023 Veinasa. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.