konsenda S-6*2-L08

Contents

6x2 HDMI Matrix Switch (4K@60Hz) User Manual

Enjoy the vivid world

1. Introduction

The HDMI 4K 60Hz matrix 6x2 connects six HD signal sources to two HD display terminals, offering optical fiber or stereo headphone audio output. This matrix allows six HDMI devices to be switched or split easily to two HDMI compatible monitors or projectors. Each output port can provide independent audio output via optical fiber or a stereo headphone jack.

This device provides solutions for noise reduction, space optimization, security concerns, data center control, information distribution, conference room presentations, and educational or corporate training environments.

Important Note: This is an HDMI matrix switcher, functioning as a bypass switcher. Different outputs can display content from different input sources. It does not support extended display functions where a single input is stretched across multiple displays.

2. Features

  • Supports 3D video format.
  • Supports 4K (input) resolution with 2K (output) downscaling.
  • Provides 2 HDMI audio outputs, a 3.5mm earphone jack, and optical output simultaneously.
  • Allows switching and splitting of 6 HDMI inputs to 2 HDMI displays.
  • Supports LPCM/Dolby/DTS 5.1 channel audio.

3. Package Contents

Please check the package contents upon opening. If any items are missing or damaged, contact your retailer.

  • 1 x 4K 60Hz HDMI Matrix 6x2
  • 1 x IR Remote Control (batteries not included)
  • 1 x 5V Power Adapter
  • 1 x User Manual

4. Specifications

HDMI ResolutionUp to 3840*2160/60Hz
Support Video Format8/10/12 bit deep color
Support Audio FormatLPCM/DTS/Dolby-AC3
Max Bandwidth600MHz
Max Baud Rate3x6Gbps
Input Cable Distance4K/30Hz ≤15M AWG26 HDMI standard cable; 4K/60Hz ≤5M HDMI 2.0 standard cable
Output Cable Distance4K/30Hz ≤15M AWG26 HDMI standard cable; 4K/60Hz ≤5M HDMI 2.0 standard cable
HDMI Input Ports6
HDMI Output Ports2
Max Working Current1A
Power Adapter FormatInput: AC (50HZ, 60HZ) 100V-240V; Output: DC5V/1.5A
Operating Temperature Range-15 to +45 °C
Operating Humidity Range5 to 90%RH (No Condensation)
Dimensions (L x W x H)200 x 70 x 25 (mm)
Weight305g

5. Product Diagram and Port Descriptions

Familiarize yourself with the ports and controls on your HDMI Matrix Switch.

Front and back view of the HDMI Matrix 6x2 with labeled ports and remote control.
Front and back view of the HDMI Matrix 6x2, showing power, IR receiver, input/output indicators, EDID switches, and HDMI ports. Also pictured is the remote control.
Detailed view of the HDMI Matrix 6x2, highlighting audio outputs (optical, R/L stereo).
Detailed view of the HDMI Matrix 6x2, highlighting the optical and R/L stereo audio output ports.

Port Descriptions:

  1. HDMI OUT1-2: HDMI output ports.
  2. HDMI IN1-6: HDMI input ports.
  3. DC/5V: 5V power supply input.
  4. IR: IR remote signal receiver.
  5. POWER: Power indicator LED.
  6. HDMI IN1→6: Input indicator LEDs for HDMI.
  7. Key2: HDMI output 2 switch button.
  8. Key1: HDMI output 1 switch button.
  9. EDID: EDID management dip switches.
  10. Optical1-2: Optical audio output ports.
  11. R/L OUT1-2: Stereo audio output ports.

6. EDID Settings

The EDID (Extended Display Identification Data) dip switches allow you to configure the audio and video capabilities reported to the source devices. This can help resolve compatibility issues with certain displays or audio systems.

EDID Dip Switch Configuration
Position 1 Position 2 Position 3 Position 4 Function
0000Copy the EDID of HDMI OUT 1
0001Copy the EDID of HDMI OUT 2
00103D 1080P 2 CH LPCM
00113D 1080P 5.1 CH (LPCM/Dolby/DTS)
01002D 1080P 2 CH (LPCM)
01012D 1080P 5.1 CH (LPCM/Dolby/DTS)
01103D 4K 2 CH (LPCM)
01113D 4K 5.1 CH (LPCM/Dolby/DTS)

Note: For the dial switch, '1' means the switch is in the downward position, and '0' means the switch is in the upward position.

7. Remote Control Instructions

The included IR remote control allows for convenient switching of input sources.

IR Remote Control for the HDMI Matrix 6x2.
IR Remote Control for the HDMI Matrix 6x2.

Remote Control Functions:

  • The six buttons labeled 'Output 1' (IN1-IN6) switch the corresponding input source for HDMI Output 1.
  • The six buttons labeled 'Output 2' (IN1-IN6) switch the corresponding input source for HDMI Output 2.

Front Panel Button and LED Operation:

  • LED Indicators (IN1-IN6): These LEDs illuminate to show which input source is currently selected for HDMI Output 1 or HDMI Output 2.
  • Buttons (Key 1 or Key 2): Use Key 1 to cycle through input sources for HDMI Output 1. Use Key 2 to cycle through input sources for HDMI Output 2.

8. Setup and Connection

Follow these steps to connect your HDMI Matrix Switch to your devices:

Connection diagram for the HDMI Matrix 6x2, showing multiple input sources (PCs) and two output displays (TVs) connected.
Example connection diagram for the HDMI Matrix 6x2.
  1. Connect each HDMI source device (e.g., PC, PS4/Xbox, TV Box, HD Camera, DVD/Blu-Ray) to an HDMI input port (HDMI IN 1-6) on the Matrix using high-quality HDMI cables.
  2. Connect your display devices (e.g., Monitor, TV, Projector) to the HDMI output ports (HDMI OUT 1 and HDMI OUT 2) on the Matrix using high-quality HDMI cables.
  3. (Optional) If you require separate audio, connect your stereo amplifier or headphones to the Optical audio output (Optical 1-2) or the R/L stereo audio output (R/L OUT 1-2).
  4. Connect the provided 5V power adapter to the DC/5V port on the HDMI Matrix and then plug it into a power outlet.
  5. Once all connections are made, power on your source devices and displays.

NOTE: HDMI ports and audio ports can be connected according to your specific needs; not every port must be connected. However, connections cannot be reversed (e.g., do not connect an output device to an input port).

9. Operating the HDMI Matrix Switch

The HDMI Matrix Switch offers two primary modes of operation: Matrix Mode and Splitter Mode.

Diagram illustrating matrix mode (different pictures on two TVs) and splitter mode (same picture on two TVs).
Matrix Mode (different content on each display) vs. Splitter Mode (same content on both displays).

Switching Input Sources:

You can switch input sources for each output independently using either the front panel buttons or the IR remote control.

  • Using Front Panel Buttons:
    • Press the Key1 button repeatedly to cycle through the HDMI IN1-IN6 sources for HDMI OUT 1.
    • Press the Key2 button repeatedly to cycle through the HDMI IN1-IN6 sources for HDMI OUT 2.
  • Using IR Remote Control:
    • To select an input for HDMI OUT 1, press the corresponding numbered button (IN1-IN6) in the 'Output 1' section of the remote.
    • To select an input for HDMI OUT 2, press the corresponding numbered button (IN1-IN6) in the 'Output 2' section of the remote.

Downscaler Functionality:

The matrix supports downscaling 4K input resolution to 2K (1080P) output. This is useful when one of your displays only supports 1080P while the other supports 4K. The matrix will automatically adjust the resolution for the lower-resolution display.

Diagram showing downscaler functionality for 4K to 1080P output, with a laptop as source and two TVs as displays.
Downscaler functionality: 4K input can be output as 1080P on compatible displays.

10. Application Scenarios

The 6x2 HDMI Matrix Switch is versatile and can be used in various environments:

Images depicting various application scenarios: a TV store with multiple displays, a teaching room with a projector, and a video conference setup.
Common application scenarios: TV Store, Teaching Room, Video Conference.
  • TV Stores: Displaying multiple video sources on different screens or the same source on multiple screens.
  • Teaching Rooms: Switching between various presentation sources (laptops, document cameras) for projectors or interactive displays.
  • Video Conferences: Managing multiple video inputs and outputs for seamless presentations and participant viewing.
  • Home Entertainment: Connecting multiple gaming consoles, Blu-ray players, and streaming devices to two TVs or projectors.

11. Maintenance and Care

To ensure the longevity and optimal performance of your HDMI Matrix Switch, please observe the following guidelines:

  • Place the device in a dry, low-temperature, dust-free, non-corrosive, and non-oxidative environment.
  • Protect all parts from strong vibrations, impacts, or falls.
  • Do not handle the power adapter with wet hands.
  • When disconnecting the power adapter from the outlet, always grasp the adapter head, not the power cord.
  • Turn off the power to the unit when it is not in use for extended periods.
  • Do not open the cover of the device or touch any internal components.
  • Always use the original factory-provided power adapter or a certified equivalent.

12. Troubleshooting

If you encounter issues with your HDMI Matrix Switch, please refer to the following common problems and solutions:

  • No Signal on Display:
    • Ensure the matrix switch is powered on and the power LED is illuminated.
    • Verify all HDMI cables are securely connected to both input sources and output displays.
    • Check that the correct input source is selected for the respective output using the front panel buttons or remote control.
    • Try bypassing the matrix switch by connecting a source directly to a display to confirm the source and display are working correctly.
    • Ensure HDMI cables are within the recommended length specifications (4K/60Hz ≤5M HDMI 2.0 standard cable).
  • Poor Picture Quality or Flickering:
    • Use high-quality HDMI 2.0 cables, especially for 4K@60Hz signals.
    • Check cable lengths; excessively long cables can degrade signal quality.
    • Ensure your source device's output resolution and refresh rate are compatible with your displays and the matrix switch.
    • Adjust EDID settings if there are compatibility issues with specific resolutions or audio formats.
  • No Audio Output:
    • Verify that the audio settings on your source device are correctly configured (e.g., outputting LPCM, Dolby, or DTS).
    • Ensure audio cables (optical or R/L stereo) are properly connected to your amplifier or headphones.
    • Check the EDID settings to ensure the matrix is reporting the correct audio capabilities to the source.
    • Confirm your amplifier/sound system is set to the correct input.
  • Remote Control Not Responding:
    • Check and replace the batteries in the remote control.
    • Ensure there is a clear line of sight between the remote and the IR receiver on the matrix switch.
    • Make sure no obstructions are blocking the IR signal.

13. User Tips

  • This product functions as an HDMI-Compatible cable that connects devices with HDMI-Compatible ports.
  • It is ideal for connecting various devices such as Monitors, TV boxes, Multimedia systems, Televisions, Computers, and Amplifiers.
  • The product is certified with CE and RoHS, ensuring compliance with safety and environmental standards.
  • For optimal performance, always use high-quality HDMI cables, especially when dealing with 4K resolutions.
  • If you experience display issues, experimenting with the EDID dip switch settings can often resolve compatibility problems.

14. Warranty and Support

For warranty information or technical support, please contact your original retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.