1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your MatSee Plus Tuya Smart Life ZigBee Motorized Gate Controller. This device is designed to convert your existing wired swing or sliding gate opener into a smart, app-controlled, and voice-controlled system.
2. Safety Information
- Always disconnect power to your gate opener before performing any wiring or installation.
- Ensure all wiring is done by a qualified professional if you are unsure.
- Keep children and pets away from the gate area during operation and installation.
- This device is for indoor use or in a protected outdoor enclosure.
- Do not expose the device to moisture or extreme temperatures.
3. Package Contents
Verify that all items are present in your package:

- 1 x ZigBee Motorized Gate Controller Module
- 1 x Sensor Cable (5m)
- 1 x Short Cable (0.5m)
- Mounting Accessories (screws, brackets, double-sided adhesive tapes)
- 1 x User Manual (PDF version available: Download PDF)
4. Specifications
| Feature | Specification |
|---|---|
| Brand Name | MatSee Plus |
| Power Source | AC |
| Input Voltage | AC 110-240V 50/60Hz |
| Output | No |
| Wireless Communication | Yes |
| Communication Method | Zigbee |
| Wireless Protocol | ZigBee 3.0 |
| Wireless Type (Gateway) | Only Support 2.4GHz WiFi Router |
| APP Name | Tuya, Smart Life |
| Voice Control | Google Home, Amazon Alexa |
| Supported OS | Android, iOS |
| Material | ABS, PC |
| Module Dimensions | 46mm x 46mm x 18mm (Mini Size) |
| Connects with | Swing Gate and Sliding Gate Motor |
| Connect Method | Dry Contact |
| State of Assembly | Ready-to-Go |
| Certification | CE, RoHS |

5. Compatibility Check
Before installation, ensure your existing gate motor is compatible:
- ZigBee Gateway Required: This module requires a Tuya ZigBee Gateway (hub) to function. It cannot directly connect to a 2.4GHz WiFi router. Ensure you have a compatible gateway.
- Motor Voltage: Your gate motor must operate on 100-240VAC.
- Motor Control Type: To check compatibility, use pliers to short-circuit the wall button terminals on your existing gate opener. If the gate opens or closes, it is compatible with this smart controller.

6. Installation Guide
The Smart Gate Controller acts as a companion device to your existing wired gate opener. Its main working principle involves connecting to the gate opener's control circuit and a sensor to monitor the gate's status.

6.1. App Download
Download the Smart Life or Tuya Smart app from your device's app store:

6.2. Wiring Diagram
Important: Power off your existing gate opener before wiring. Wire order for the signal cable does not matter.

- Connect the AC power (100-240V) to the L and N terminals on the module.
- Connect the signal control cable from the module's S1/S2 terminals to the two terminals on your existing gate opener that connect to the wall button.
- Connect the sensor cable to the S3/S4 terminals on the module.
6.3. Pairing with ZigBee Gateway
Ensure your Tuya ZigBee gateway is already set up and configured. The smart gate controller needs to be within range of the gateway. A ZigBee Range Extender can be used if necessary.

- Power on the Smart Gate Controller.
- Press and hold the pairing button on the module for 5 seconds until its indicator light flashes.
- In the Smart Life or Tuya Smart app, navigate to your ZigBee gateway.
- Click the '+' icon to add a subdevice.
- Confirm that the LED is blinking in the app and proceed with the discovery.
- Once discovered, the device will be added to your gateway.
6.4. Sensor Installation
The sensor monitors the gate's open/closed status. Keep your gate closed during sensor installation.

- Find a suitable position on your gate to mount the two parts of the sensor.
- When the gate is closed, the distance between the two sensor parts must be less than 30mm.
- When the gate is open, the two sensor parts should be well separated.
- Use the provided double-sided adhesive tapes, screws, or brackets for fixation.

After connecting the sensor cable to the module, move the sensor parts together and apart to verify functionality in the app. The app should show "Opened" or "Closed" accordingly.

6.5. Final Deployment

- Deploy the smart device, ideally on top of your existing gate opener. Use double-sided adhesive tapes for fixation if needed.
- Power on both your existing gate opener and the smart gate controller.
- Wait approximately 1 minute for the smart gate controller to automatically reconnect to the cloud service.
Congratulations! You have completed all installation steps.
7. Operation
7.1. App Control
Once connected, you can control your gate remotely via the Tuya or Smart Life APP from anywhere.

7.2. Voice Control
The device supports voice control with Amazon Alexa and Google Home. Ensure your device is named consistently in the Smart Life app (e.g., "Garage Door Opener").

For Amazon Alexa:
- Open the Alexa app and enable the "Smart Life" skill.
- Link your Smart Life account.
- Discover devices.
Example commands:
- "Alexa, turn on 'Garage Door'."
- "Alexa, turn off 'Garage Door'."
For Google Home:
- Download the Google Home app and set up your Google Home device.
- In the Google Home app, go to "Home Control" and add a device.
- Select "Smart Life" and link your account.
- Add "Home Control Action".
Example commands:
- "Hey Google, turn on the 'Garage Door'."
- "Hey Google, turn off the 'Garage Door'."
7.3. Timing Function
You can set schedules for your gate to open or close automatically at specific times.

7.4. Real-time Monitoring
Monitor the status of your swing or sliding gate (opened/closed) in real-time through the app.
7.5. Share Device
You can share control of the device with family members. They will need to register a Tuya account, and you can authorize access via the "Share Device" option in the app.
8. Troubleshooting
- Device not pairing: Ensure the LED indicator is blinking rapidly. If not, press and hold the pairing button for 5 seconds to enter pairing mode. Confirm your smartphone and the controller are within range of the ZigBee Gateway.
- Gate not responding to commands: Double-check all wiring connections, especially the signal control cable to the gate opener's wall button terminals. Ensure the gate motor is powered.
- Incorrect gate status in app: Verify the sensor is correctly installed and the gap between the two parts is less than 30mm when closed and sufficiently separated when open. Check the sensor cable connection to the module.
- Voice control not working: Ensure the device name in the Smart Life/Tuya app matches the name you are using with Alexa or Google Home. Confirm the Smart Life skill/service is linked in your voice assistant app.
- ZigBee vs. WiFi confusion: This is a ZigBee device and requires a ZigBee gateway (hub). The gateway itself connects to your 2.4GHz WiFi network. The controller does not connect directly to WiFi.
9. User Tips
- Motor Compatibility Test: Before full installation, use pliers to briefly short-circuit the wall button terminals on your gate opener. If the gate moves, it's compatible. This is a quick and essential check.
- Sensor Placement: Precise sensor placement is key for accurate open/closed status. Experiment with positions to ensure reliable detection.
- ZigBee Gateway: A stable ZigBee gateway is crucial for reliable operation. Consider a ZigBee range extender if your gate is far from the gateway.
- App Notifications: Configure app notifications for gate status changes (e.g., if the gate is left open for too long) for added security and convenience.
10. Maintenance
- Keep the device clean and free from dust.
- Regularly check all wiring connections for security and integrity.
- Ensure the sensor remains securely mounted and free from obstructions.
- Periodically check for app updates to ensure optimal performance and security.
11. Warranty and Support
For warranty information and technical support, please refer to the seller's policy or contact MatSee Plus customer service directly. Keep your purchase receipt for any warranty claims.
12. Video Demonstration
Watch this video for a visual guide on pairing the device and checking sensor functionality:
Video: Demonstration of device pairing and sensor operation with the app.