CHENGHONG KTS-1265

Contents

KTS-1265 Portable Bass RGB LED Wireless Speaker User Manual

Model: KTS-1265 | Brand: CHENGHONG

1. Introduction

Thank you for purchasing the CHENGHONG KTS-1265 Portable Bass RGB LED Wireless Speaker. This manual provides important information regarding the setup, operation, maintenance, and troubleshooting of your new speaker. Please read this manual thoroughly before use and retain it for future reference.

CHENGHONG KTS-1265 Portable Wireless Speaker with red RGB LED lights
Figure 1: KTS-1265 Portable Wireless Speaker (Front View)

2. Setup

2.1 Unboxing

Carefully remove all components from the packaging. Ensure you have the following items:

  • KTS-1265 Wireless Speaker
  • USB Charging Cable (1 pc)
  • User Manual (this document)

2.2 Charging the Speaker

Before first use, fully charge the speaker. Connect the supplied USB charging cable to the speaker's charging port and the other end to a standard USB power adapter (not included) or a computer's USB port. The charging indicator (if present) will show the charging status and turn off or change color once fully charged. The speaker features a rechargeable Li-battery with 2400mAh capacity.

2.3 Powering On/Off

Press and hold the Power button (usually marked with a power symbol) on the control panel to turn the speaker ON or OFF.

2.4 Bluetooth Pairing

  1. Turn on the speaker. It will typically enter Bluetooth pairing mode automatically, indicated by a flashing LED light.
  2. Enable Bluetooth on your smartphone, tablet, or other Bluetooth-enabled device.
  3. Search for available Bluetooth devices and select "KTS-1265" from the list.
  4. Once paired, the speaker will emit a confirmation sound, and the LED light will stop flashing.

2.5 Connecting via AUX

To connect a device using an AUX cable (not included), plug one end into the speaker's AUX input and the other end into your audio device's headphone jack. The speaker should automatically switch to AUX mode or require manual selection via the Mode button.

2.6 USB/TF Card Playback

Insert a USB flash drive or a TF (MicroSD) card containing MP3 audio files into the respective port. The speaker will automatically detect the storage and begin playing music. Use the control buttons to navigate tracks.

3. Operating Instructions

Top view of KTS-1265 speaker showing control buttons and handle
Figure 2: KTS-1265 Control Panel

3.1 Control Panel Functions

  • Power Button: Press and hold to turn ON/OFF.
  • Mode Button: Short press to switch between Bluetooth, FM Radio, AUX, USB, and TF card modes.
  • Play/Pause Button: Short press to play or pause music. In FM mode, press and hold to auto-scan and save stations.
  • Previous Track/Volume Down Button: Short press for previous track. Press and hold to decrease volume.
  • Next Track/Volume Up Button: Short press for next track. Press and hold to increase volume.
  • BASS Button: Activates or deactivates the bass enhancement feature.
  • RGB LED Light: The speaker features colorful RGB LED lights. Specific controls for light modes may be integrated with the Mode button or a dedicated light button (refer to speaker for exact labeling).

3.2 True Wireless Stereo (TWS) Function

The KTS-1265 supports TWS, allowing you to pair two KTS-1265 speakers together for a stereo sound experience.

  1. Ensure both KTS-1265 speakers are turned on and not connected to any Bluetooth device.
  2. On one speaker (this will be the primary speaker), press and hold the TWS button (if available, or a combination of buttons as indicated on the speaker itself) until you hear a pairing tone.
  3. The two speakers will connect automatically. Once connected, the primary speaker's LED will indicate successful pairing.
  4. Connect your Bluetooth device to the primary speaker as described in section 2.4. Audio will now play in stereo through both speakers.

3.3 FM Radio Operation

  1. Switch to FM mode using the Mode button.
  2. Press and hold the Play/Pause button to initiate an automatic scan for FM stations. The speaker will save detected stations.
  3. Use the Previous/Next track buttons to navigate through the saved FM stations.

3.4 Microphone Usage

The speaker has a built-in microphone for hands-free calling when connected via Bluetooth to a smartphone. When a call comes in, press the Play/Pause button to answer or end the call.

4. Maintenance

4.1 Cleaning

  • Wipe the speaker with a soft, dry cloth.
  • Do not use abrasive cleaners, waxes, or solvents as they may damage the finish.
  • Avoid getting moisture into any openings.

4.2 Battery Care

  • To prolong battery life, fully charge the speaker before storing it for extended periods.
  • Avoid exposing the battery to extreme temperatures.
  • Do not attempt to replace the battery yourself. Contact customer support if battery issues arise.

4.3 General Handling

  • Do not drop or subject the speaker to strong impacts.
  • Keep the speaker away from water and high humidity, as it is not waterproof.
  • Avoid placing the speaker near heat sources or in direct sunlight for prolonged periods.

5. Troubleshooting

ProblemPossible CauseSolution
Speaker does not turn onLow batteryCharge the speaker fully.
No soundVolume too low; Incorrect mode; Device not connectedIncrease volume; Switch to correct input mode (Bluetooth, AUX, USB/TF); Reconnect device.
Bluetooth not connectingSpeaker not in pairing mode; Device Bluetooth off; Too far from speakerEnsure speaker is in pairing mode; Turn on device Bluetooth; Move device closer (within 10m); Forget device on phone and re-pair.
Poor sound qualityLow battery; Interference; Source audio qualityCharge speaker; Move away from other electronic devices; Try a different audio source.
FM radio not workingWeak signal; Not scannedMove to an open area; Perform an auto-scan for stations.

6. Specifications

FeatureDetail
Product NameKTS-1265 Wireless Speaker
Model NumberKTS-1265
Brand NameCHENGHONG
Speaker TypePortable
Speaker Specification3 inch x 10W x 2pcs
Input Power<25 W
Audio CrossoverFull-Range
Number of Loudspeaker Enclosure1
Channels1.1
Frequency Range100Hz-20KHz
CommunicationAUX, USB
Bluetooth Version5.0
Power SourceBattery
Battery TypeRechargeable Li battery
Battery Capacity2400mAh
Built-in MicrophoneYes
Active Noise-CancellationActive
Display ScreenNo
WaterproofNo
Intelligent Personal AssistantNone
Remote ControlNo
Support Memory CardYes (TF Card)
Cabinet MaterialPlastic
MaterialPlastic
ColorBLACK
FunctionsUSB/TF/FM/TWS/AUX/MIC/BASS/RGB LED Color Light
Free AccessoriesUSB Charging cable x 1pc
Product Unit Size (L x W x H)16 x 15.2 x 29.2 cm
Package Dimensions (L x W x H)19 x 18 x 32 cm
Package Weight1.74 kg
OriginMainland China
CertificationNone

7. Warranty and Support

7.1 Free Returns

This product is eligible for free returns within 90 days of purchase. Please refer to the retailer's return policy for detailed instructions and conditions.

7.2 Customer Support

For any questions, technical support, or warranty claims, please contact the seller, CHENGHONG CHENGHONGShop911238014 Store, through the platform where you made your purchase. Provide your order number and a detailed description of the issue for prompt assistance.

7.3 Safety and Privacy

Your security and privacy are important. We do not share your personal details with any third parties without your consent. Your privacy is protected, and personal details are kept safe and secure.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.