1. Product Overview
The QF-RD21F is a high-precision, stable, and reliable adjustable timer control relay module designed for various applications requiring delayed turn-off functionality, such as cooling fans, exhaust fans, and heaters. It operates by turning on the output when an input signal is present and turning off the output after a set delay once the signal disappears.
2. Safety & Warnings
Read all instructions before use to ensure safety and prevent damage.
- Electrical Safety: This module operates with AC 100V-220V. Improper handling can lead to electric shock. Ensure all power is disconnected before installation or maintenance. If you are not confident in handling electrical wiring, consult a qualified electrician.
- Do not use with incompatible devices or accessories to avoid affecting product performance or damaging related equipment.
- If the product shows any abnormal conditions such as smoke, unusual noises, or odors, immediately stop using it and disconnect power.
- This product is not food-related. Keep it away from children and avoid accidental ingestion or touching of sharp parts (if any).
- Ensure the module is installed in a suitable enclosure to prevent accidental contact with live components, especially given its 220V operation.
3. Setup and Wiring
3.1. Preparation
- Ensure all power sources are disconnected before beginning installation.
- Remove any protective films from the device.
3.2. Wiring Instructions
The module features terminals for Line (L), Neutral (N), and two output terminals (L2 and FAN). The input signal (K) triggers the module's operation.
Refer to Figure 2 for detailed wiring configurations:
- Power Input: Connect your AC 100V-220V power supply to the 'L' (Live) and 'N' (Neutral) terminals.
- Input Signal (K): This is typically a switch that provides the trigger signal to the module. When the switch is closed, the module receives a signal.
- Output for Fan: Connect the fan to the 'FAN' terminal and the Neutral line.
- Output for Heater (Optional): If using a heater, connect it to the 'L2' terminal and the Neutral line.
Always double-check all connections before applying power.
4. Operation
4.1. Functionality
The module operates as a power-off delay disconnect switch. When an input signal (e.g., from switch K) is detected, the output (FAN, L2) is turned on. Once the input signal disappears (switch K opens), the module initiates a countdown for the set time, after which the output is turned off.
4.2. Time Setting
The delay time is adjustable using a combination of DIP switches and a potentiometer on the module. There are four time ranges (gears) to choose from:
- First Gear: 0.2 - 30 seconds (Accuracy: 0.1 seconds)
- Second Gear: 0.2 - 300 seconds (5 minutes) (Accuracy: 0.3 seconds)
- Third Gear: 0.2 - 30 minutes (Accuracy: 1.8 seconds)
- Fourth Gear: 0.2 - 300 minutes (5 hours) (Accuracy: 18 seconds)
Use the DIP switches to select the desired time gear, then fine-tune the delay within that range using the blue potentiometer (Time Adj).
4.3. Timing Diagram
The timing diagram illustrates the relationship between the input signal (K), the heater output (L2), and the fan output (FAN).
5. Maintenance
- Keep the module clean and free from dust and debris.
- Avoid exposure to moisture or extreme temperatures.
- Periodically inspect wiring connections to ensure they are secure.
- The module has a lifetime of 100,000 movements, indicating its durability under normal operating conditions.
6. Troubleshooting
- Module does not power on: Check the AC 100V-220V power connections to the 'L' and 'N' terminals. Ensure the power source is active.
- Output does not turn on/off as expected:
- Verify the input signal (K) is correctly connected and functioning.
- Check the output connections to the FAN and L2 terminals.
- Ensure the load (fan/heater) is within the module's 10A maximum capacity.
- Delay time is incorrect or inconsistent:
- Re-check the DIP switch settings to ensure the correct time gear (seconds or minutes, 30 or 300 range) is selected.
- Carefully adjust the potentiometer for precise timing within the selected range. Small adjustments can make a significant difference.
- Abnormal conditions (smoke, unusual noises, odors): Immediately disconnect power and cease use. Do not attempt to repair the module yourself.
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | QF-RD21F |
| Voltage | AC 100V-220V |
| Power Consumption | <1.0W (standby zero power consumption) |
| Time Range (Gear 1) | 0.2 - 30 seconds (Accuracy: 0.1s) |
| Time Range (Gear 2) | 0.2 - 300 seconds (5 minutes) (Accuracy: 0.3s) |
| Time Range (Gear 3) | 0.2 - 30 minutes (Accuracy: 1.8s) |
| Time Range (Gear 4) | 0.2 - 300 minutes (5 hours) (Accuracy: 18s) |
| Output Capacity | Max 10A (Output voltage same as input) |
| Lifetime | 100,000 movements |
| Dimensions | 8.2 x 3.1 cm (3.23 x 1.22 inches) |
| Theory | Time Relay |
| Contact Load | Low Power |
| Protect Feature | Sealed |
8. User Tips
- Precise Adjustment: While the minute/second and 30/300 switches work normally, setting the exact desired time can be a bit challenging. Make small, careful adjustments to the potentiometer for optimal precision.
- Safety Enclosure: As this module handles 220V, it is highly recommended to install it within a protective housing or enclosure to prevent accidental contact with live electrical components.
9. Frequently Asked Questions (FAQ)
- Q: What is the maximum delay time I can set?
- A: The module supports a maximum delay of 300 minutes (5 hours) in its fourth gear setting.
- Q: My module turns off too quickly, not matching the time I set. What should I do?
- A: First, ensure the DIP switches are correctly set for the desired time range (e.g., 30 minutes vs. 30 seconds). Then, carefully re-adjust the potentiometer. Small turns can significantly change the delay time.
- Q: Does the module allow for manual switch off?
- A: The module's operation is controlled by the presence or absence of an input signal (e.g., from switch K). To turn off the output, the input signal must be removed, and the module will then initiate its set delay before disconnecting power to the load.
10. Manufacturer & Support Information
For technical support or inquiries, please contact the manufacturer using the details below. You may also refer to the official user manual PDF for additional information: QF-RD21F User Manual (PDF)
Manufacturer Information:
- Country: China
- Telephone: 86-13417026232
- Email: xinhui0518@163.com
- Responsible Person: Ouyanghui
EU Representative Information:
- Name: eVatmaster Consulting GmbH
- Address: Bettinastr. 30, 60325 Frankfurt am Main, Germany
- Email: contact@evatmaster.com
- Telephone: +49-6995179070