1. Introduction
This manual provides detailed instructions for the installation and operation of the SKYFAME 16Pin Car Stereo Wire Harness Adapter with Canbus Box Decoder, specifically designed for Volvo S60, XC60, and V60 models from 2008-2013. This kit facilitates the retrofitting of Android large-screen intelligent car multimedia navigation audio systems, allowing for easy replacement of the original car radio and audio system.
The product includes a dedicated wiring harness and a CANBUS protocol box (OD-OLO-01 or BSJ XC) to ensure seamless integration with your vehicle's electrical system.
2. Compatible Vehicle Models
- Volvo XC60 (2008-2013)
- Volvo S60 (2008-2013)
- Volvo V60 (2008-2013)
3. Safety Precautions
- Installation should be performed by experienced professionals or individuals with a strong understanding of automotive electrical systems.
- Always disconnect the vehicle's battery before beginning any electrical work to prevent short circuits or damage.
- Ensure all connections are secure and properly insulated to avoid electrical hazards.
- Refer to your vehicle's service manual for specific instructions on removing and installing car audio components.
- Do not cut any original car wires; the harness is designed for plug-and-play installation.
4. Package Contents
The package typically includes:
- 16Pin Car Stereo Wire Harness Adapter
- Canbus Box Decoder (OD-OLO-01 or BSJ XC)
- Associated RCA cables and other connectors
Image 1: Overview of the SKYFAME 16Pin Car Stereo Wire Harness Adapter with Canbus Box Decoder (OD and BSJ variants shown).
5. Setup and Installation
Professional installation is highly recommended. If self-installing, ensure you have the necessary tools and follow these steps carefully.
5.1 Pre-Installation Checks
- Verify compatibility with your specific Volvo model (XC60, S60, V60, 2008-2013).
- Ensure your Android head unit is a common public version compatible with standard 16 PIN main power cord interfaces. (Note: TESLA style devices may require a special kit).
- Disconnect the vehicle's negative battery terminal.
5.2 Wiring Diagram Overview
Image 2: General wiring diagram for connecting the harness to an Android head unit and vehicle components.
The diagram illustrates connections for various components. For detailed pin assignments, refer to Image 5.
- Main Power Line: Connects to the vehicle's power supply.
- Canbus Box: Integrates with the vehicle's CANBUS system for communication.
- Radio Antenna: For radio signal reception.
- SPDIF: Digital audio output.
- USB: For data transfer and device charging.
- KEY1, KEY2: Steering wheel control inputs.
- BRAKE CTL: Brake control signal.
- REVERSE: Reverse gear signal.
- AUTO ANT: Automatic antenna control.
- Speaker Outputs: FR+, FR-, FL+, FL-, RR+, RR-, RL+, RL- (Front Right, Front Left, Rear Right, Rear Left).
- Power Connections: ACC (Accessory power), Battery +12V, Battery GND (Ground).
- RCA Connections: For audio/video input/output (e.g., AUX IN, VIDEO OUT, VIDEO IN, AMP CTL).
- Additional Multimedia Connections: GPS Navigation Antenna, 4G Antenna, Reverse Video Input Cable, 360 Reserve.
5.3 Harness Connection Steps
- Carefully remove the original car radio and access the wiring harness area.
- Connect the 16-PIN main power cord interface of the SKYFAME harness to your Android head unit.
- Connect the vehicle-specific connectors of the SKYFAME harness to the corresponding ports in your Volvo. The design is plug-and-play, requiring no wire cutting.
- Integrate the Canbus Box Decoder (OD-OLO-01 or BSJ XC) into the harness as indicated.
- Connect any additional accessories such as GPS antenna, 4G antenna, reverse camera, or external amplifiers using the provided RCA and other auxiliary cables.
- Ensure all connections are firm and correctly seated.
- Before reassembling the dashboard, temporarily reconnect the vehicle's battery to test the system.
Image 3: Close-up view of the OD Canbus Box Decoder, showing its model and compatibility information.
Image 4: The Canbus Box Decoder labeled OD-OLO-01, compatible with 08-13 XC60/S60/V60.
6. Operating the Canbus Decoder
After physical installation, the CANBUS protocol box requires configuration within your Android head unit's settings.
- Power on your Android head unit.
- Navigate to the "Factory Settings" menu on your Android host. This menu often requires a specific password (refer to your Android head unit's manual).
- Locate the "Car Bus Configuration" or "CANBUS Settings" option.
- Select the corresponding CANBUS brand (OUDI OD or BAOSHIJIE BSJ XC) and model (OD-VOLVO-01 or OD-OLO-01) from the available options.
- It is recommended to connect the head unit to Wi-Fi and update to the latest MCU and configuration file for optimal performance and compatibility.
- Test all functions, including steering wheel controls, reverse camera, and audio output, to ensure proper operation.
7. Specifications
| Feature | Detail |
|---|---|
| Product Type | Power Line / Wire Harness Adapter |
| Model Number | CAB0112 (General), OD-OLO-01 (Canbus Box) |
| Compatible Vehicles | Volvo XC60, S60, V60 (2008-2013) |
| Main Power Cord Interface | 16 PIN (Standard Android Head Unit) |
| Canbus Box Brand | OUDI OD / BAOSHIJIE BSJ XC |
| Material | Environment-friendly ABS plastic |
| Installation | Plug-and-play, no wire cutting required |
| Harness Length (with Canbus Box) | Approximately 64cm (2.10ft) |
Image 5: Harness with Canbus Box, showing approximate length and detailed pinout for P1 connector.
8. Troubleshooting
- No Power to Head Unit:
- Check all power connections (ACC, BATT, GND) for secure fit.
- Verify the vehicle's fuse box for any blown fuses related to the stereo system.
- Ensure the 16-PIN connector is fully seated in the Android head unit.
- Steering Wheel Controls Not Working:
- Confirm the CANBUS box is correctly connected and configured in the Android head unit's factory settings (select correct brand and model).
- Ensure the KEY1 and KEY2 wires are properly connected if applicable to your head unit.
- Update the Android head unit's MCU and configuration files via Wi-Fi.
- No Sound:
- Check all speaker wire connections (FL+, FL-, etc.) for proper polarity and secure fit.
- If using an external amplifier, ensure the AMP CTL wire is connected and the amplifier is powered on.
- Verify audio settings on the Android head unit.
- Reverse Camera Not Activating:
- Ensure the REVERSE wire is correctly connected to the vehicle's reverse signal.
- Check the reverse video input cable connection to the head unit.
- Verify camera settings in the Android head unit.
- General Malfunction:
- Double-check all connections against the wiring diagram (Image 2 and Image 5).
- Perform a factory reset on the Android head unit (if issues persist after checking connections and CANBUS settings).
- If problems arise during use, provide detailed descriptions, photos, or videos to customer support for assistance.
9. User Tips
- Canbus Box Selection: The product description mentions "OD" and "BSJ" variants. Ensure you have the correct Canbus box for your specific vehicle and head unit combination. The images show "OD" and "BSJ" as distinct options.
- Firmware Updates: Always update your Android head unit's MCU and configuration files after installation, especially when connecting to Wi-Fi, to ensure the latest compatibility and bug fixes for the CANBUS decoder.
- Professional Guidance: If you are unsure about any step, seek guidance from a professional installer or contact customer service with your original car information for specific advice.
- Testing: Before fully reassembling your dashboard, perform a thorough test of all functions (audio, steering wheel controls, reverse camera, etc.) to confirm correct installation.
10. Maintenance
The SKYFAME wire harness and Canbus box are designed for durability and require minimal maintenance.
- Ensure all connections remain secure over time. Vibrations from driving can sometimes loosen connections.
- Keep the Canbus box and wiring free from moisture and extreme temperatures.
- Periodically check for any signs of wear or damage to the wiring, especially if you experience intermittent issues.
- No user-serviceable parts are inside the Canbus box; do not attempt to open it.
11. Warranty and Support
All products come with a one-year warranty in case of any defects. If you encounter any issues, please contact customer service with details, photos, or videos of the problem. Necessary accessories for repair may be provided depending on the situation.
The warranty does not cover situations caused by abuse, human damage, accidental damage, water ingress, improper operation, or exceeding the prescribed scope of use.
For technical information and support, you may visit the official SKYFAME website and check the HELP section.
