Retekess TD173

Contents

Retekess TD173 Wireless Pager System User Manual

Model: TD173

Thank you for choosing Retekess. This manual provides essential information for the safe and efficient operation of your TD173 Wireless Pager System.

1. Introduction

The Retekess TD173 guest paging system utilizes RF wireless technology to streamline communication. The system includes one transmitter and 20 guest pagers, with the capability to expand up to 998 pagers. It is widely used in fast food restaurants, coffee shops, pizza shops, 4S stores, churches, and other venues where efficient customer flow management is crucial. This system aims to improve overall efficiency, enhance customer satisfaction, reduce labor costs, and elevate your establishment's image.

2. Functional Overview

The Retekess TD173 system is designed for ease of use and efficient guest notification. Below is a diagram illustrating the main components and their functions.

Retekess TD173 Wireless Pager System with 20 pagers and a transmitter base
Figure 1: System Components. The image shows the transmitter keyboard with a digital display and number keys, along with 20 pagers docked in their charging slots. An antenna is visible on the right side of the charging base. Each pager has a transparent cover for custom inserts.

Key Components:

  • Transmitter Keyboard: Features a digital display, number keys (0-9), and function keys (Back, Call, Set, Calling History).
  • Pagers: Individual units given to guests, each with a unique ID. They feature a charging indicator, alarm LED, and a one-click mute button.
  • Charging Slots: Where pagers are docked for charging.
  • Antenna: For wireless signal transmission.
  • Power Input: Connection point for the power adapter.

3. Setup

3.1. Before First Use (Charging)

  1. Charge the pagers for more than 10 minutes before initial use.
  2. Connect the transmitter to the power supply.
  3. Place the pagers onto the charging slots. The charging indicator will flash quickly during charging and remain solid when fully charged.
  4. Pagers will automatically turn on and begin charging when inserted into the charging slot.

3.2. Paring Operation (F1)

This process assigns a unique ID to each pager.

  1. Ensure the system is in charging mode.
  2. Press the [Set] key to enter setting mode; "F1" will be displayed.
  3. Press the [Call] key to enter paring mode. The charging indicators on pagers will turn off, and other indicators will turn on. "000" will be displayed.
  4. Remove a pager from its charging slot.
  5. Within 10 seconds, enter a desired number (1-998) for the pager's ID using the keyboard.
  6. Press the [Call] key to confirm. The pager will beep, indicating successful pairing.
  7. Repeat steps 4-6 to pair additional pagers.
  8. Press the [Back] key twice to exit the setting mode.

Note: If no operation occurs within 10 seconds after a pager is removed from the charging slot, the system will automatically exit pairing mode.

3.3. Transmitter ID Setting (F4)

This allows you to change the ID of the transmitter.

  1. Ensure the system is in charging mode.
  2. Press the [Set] key to enter setting mode; "F1" will be displayed.
  3. Press the "△" key three times; "F4" will be displayed.
  4. Press the [Call] key to enter the sub-menu.
  5. Enter the desired transmitter ID (1-999) using the keyboard.
  6. Press the [Call] key to confirm. The transmitter will emit a beep, and "F4" will be displayed, indicating the setting is complete.
  7. Press the [Back] key to exit the setting mode.

Note: All pagers must be re-paired after changing the transmitter ID.

4. Operating Instructions

4.1. Calling Pagers

To call a pager:

  1. Ensure the transmitter is in Call Mode (displaying "000"). If in another mode, continuously press the [Back] key to return to Call Mode.
  2. Enter the desired pager number using the keyboard.
  3. Press the [Call] key to activate the corresponding pager.

4.2. Call History

To view and re-call previous alerts:

  • Press the "△" or "▽" key on the transmitter to display previously called numbers.
  • The system can store up to 10 recent call records.
  • To re-call a number shown in the history, press the [Call] key.

Note: The call history does not cycle; you can only scroll up and down through the stored records.

4.3. Prompt Settings (F2)

Customize the alert type for pagers.

  1. Ensure the system is in charging mode.
  2. Press the [Set] key to enter setting mode; "F1" will be displayed.
  3. Press the "△" key once; "F2" will be displayed.
  4. Press the [Call] key to enter the sub-menu.
  5. Use the "△" or "▽" key to select the desired prompt value (see Code Description below).
  6. Press the [Call] key to confirm. The transmitter will beep, and "F2" will be displayed, indicating the setting is complete.
  7. Press the [Back] key to exit the setting mode.

Code Description for Prompt Modes:

  • 000: Keyboard prompt mode: Mute
  • 001: Keyboard prompt mode: Beep
  • 002: Keyboard prompt mode: Vibration
  • 003: Keyboard prompt mode: Beep and Vibration
  • 004: Pager prompt mode: Beep
  • 005: Pager prompt mode: Vibration
  • 006: Pager prompt mode: LED Flash
  • 007: Pager prompt mode: Beep and Vibration
  • 008: Pager prompt mode: Vibration and LED Flash
  • 009: Pager prompt mode: Beep and LED Flash
  • 010: Pager prompt mode: Beep and Vibration and LED Flash
Diagram showing buzzer, flash, and vibration reminder modes
Figure 2: Multiple Reminder Ways. The system offers various customizable reminder modes including buzzer, flash, and vibration, which can be combined to suit different environments.

4.4. Prompt Time Setting (F3)

Adjust the duration of the pager's reminder.

  1. Ensure the system is in charging mode.
  2. Press the [Set] key to enter setting mode; "F1" will be displayed.
  3. Press the "△" key twice; "F3" will be displayed.
  4. Press the [Call] key to enter the sub-menu.
  5. Enter the desired prompt time (1-999 seconds) using the keyboard.
  6. Press the [Call] key to confirm. The transmitter will beep, and "F3" will be displayed, indicating the setting is complete.
  7. Press the [Back] key to exit the setting mode.
Transmitter with adjustable prompt time from 1 to 999 seconds
Figure 3: Adjustable Reminder Duration. The prompt time for pagers can be set from 1 to 999 seconds, allowing for flexible customization.

4.5. One-click Mute (Pager)

Each pager is equipped with a mute button for silent operation.

Pager with a mute button
Figure 4: One-click Mute. The pager features a dedicated button for customers to turn off the sound, ideal for quiet environments.

4.6. One-Key Shutdown (Transmitter)

To turn off all pagers simultaneously:

  1. Enter "999" in Call Mode on the transmitter.
  2. Press the [Call] key. All charging pagers will turn off.
  3. The charging indicators will turn off for 5 seconds, then light up again to indicate charging status.
  4. The indicator light on a pager will go out when it's removed from the charging slot after shutdown.
  5. To turn pagers back on, insert them into the charging slots and connect the transmitter to the power source.

Note: This instruction is invalid for pagers that are not currently charging.

Transmitter showing '999' and a call icon for one-key shutdown
Figure 5: One Key Shutdown. Easily shut down all pagers by entering '999' and pressing the call button on the transmitter.

5. Maintenance

5.1. Battery Charging Recommendations

  • It is recommended to charge the pagers at least once a month to maintain battery health.
  • If not charged for a long time, the battery may lose power.
Pager with battery icon indicating 200mAh capacity and 24h work time
Figure 6: Built-in 200mAh Battery. Pagers can work up to 24 hours on a single charge, but regular charging is recommended.

5.2. Replacing Advertising Stickers

You can customize the appearance of your pagers:

  1. Remove the transparent cover from the pager.
  2. Place your desired advertising paper onto the pager.
  3. Re-insert the transparent cover to secure the paper.
Pager showing a customizable advertising sticker
Figure 7: Customizable Stickers. Pagers feature replaceable advertising stickers for branding or promotional messages.

5.3. Cleaning

Regularly clean the pager and transmitter surfaces with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that could damage the device.

6. Troubleshooting

  • Setup Button Not Responding: The 'Set' button on the transmitter needs to be pressed and held for 3 seconds to enter the setting mode. This is a design feature to prevent accidental touches.
  • Charging Tray Automatically Turns On After Power Off: This can occur due to residual electricity in the power supply. To prevent this, unplug the DC plug first when shutting down the system.
  • Interference Issues: If the equipment causes harmful interference to radio or television reception, try the following:
    • Reorient or relocate the receiving antenna.
    • Increase the separation between the equipment and receiver.
    • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
    • Consult the dealer or an experienced radio/TV technician for help.

7. Specifications

7.1. Transmitter Specifications

Feature Specification
Operating Voltage DC12V/2A
Frequency 433.92MHz
Standby Power <400mW
Modulation Type OOK
Max Capacity 998pcs
Keyboard Type Touching Pad
Material ABS
Dimensions 285*155*32mm

7.2. Pager Specifications

Feature Specification
Battery Li-ion 3.7V 200mAh
Frequency 433.92MHz
Standby Current <12mA
Standby Duration 24h
Sensitivity -108dBm
Prompt Mode Vibration/Buzzer/Flashing
Prompt Time 1-999s
Material ABS
Dimensions 100*50*10mm

7.3. General Specifications

  • Model Number: TD173
  • Origin: Mainland China
  • Certification: CE, FCC
  • Battery Included: Yes
  • Charging Pagers per set: 20pcs
  • Long Transmission Distance: Up to 500 m / 1640 ft (open environment)
Diagram illustrating long transmission distance of up to 500m/1640ft in open environment
Figure 8: Long Transmission Distance. The system provides reliable communication over distances up to 500 meters in open environments.

8. Safety Information

Before using this radio, please read this guide which contains important operating instructions for safe usage and RF energy awareness and control for compliance with applicable standards and regulations.

8.1. RF Energy Exposure and Product Safety Guide

When radios are used as a consequence of employment, Local Government Regulations require users to be fully aware of and able to control their exposure to meet occupational requirements. Your Retekess radio has an RF Exposure Product Label. Your Retekess user manual or separate safety booklet includes information and operating instructions required to control your RF exposure and to satisfy compliance requirements.

8.2. Unauthorized Modification and Adjustment

Changes or modifications not expressly approved by the party responsible for compliance may void the user's authority to operate this radio and should not be made. Transmitter adjustments should only be made by or under the supervision of a technically qualified person. Replacement of any transmitter component not authorized by the local government radio management departments equipment authorization for this radio could violate the rules.

8.3. FCC Requirements

  • This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
    1. This device may not cause harmful interference.
    2. This device must accept any interference received, including interference that may cause undesired operation.
  • This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

8.4. CE Requirements

Henan Eshow Electronic Commerce Co., Ltd declares that the radio equipment type is in compliance with the essential requirements and other relevant provisions of RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and the WEEE Directive 2012/19/EU. The full text of the EU declaration of conformity is available at: www.retekess.com.

8.5. Disposal

The crossed-out wheeled-bin symbol on your product, literature, or packaging reminds you that in the European Union, all electrical and electronic products, batteries, and accumulators (rechargeable batteries) must be taken to designated collection locations at the end of their working life. Do not dispose of these products as unsorted municipal waste. Dispose of them according to the laws in your area.

8.6. IC Requirements

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference, including interference that may cause undesired operation of the device.

8.7. Avoid Choking Hazard

The product contains small parts. Keep out of reach of children under 3 years to avoid choking hazards.

8.8. Protect Your Hearing

  • Use the lowest volume necessary for your task.
  • Increase volume only if you are in noisy surroundings.
  • Decrease volume before adding a headset or earpiece.
  • Limit the duration of using headsets or earpieces at high volume.
  • When using the radio without a headset or earpiece, do not place the radio's speaker directly against your ear.
  • Be cautious with earphones; excessive sound pressure can cause hearing loss.

Note: Prolonged exposure to loud noises can temporarily or permanently affect hearing. The louder the volume, the less time is required before hearing damage can occur. Hearing damage may initially be undetectable but can have a cumulative effect.

8.9. Approved Accessories

This radio complies with RF exposure guidelines when used with Retekess-supplied or designated accessories. Using other accessories may not ensure compliance with RF exposure guidelines and may violate regulations. For a list of approved accessories, visit: http://www.Retekess.com.

9. Warranty and Support

9.1. Warranty Information

  • Most new products come with a two-year manufacturer's warranty from the date of purchase.
  • For warranty service, a receipt or proof of purchase from the original seller is required.

9.2. Exclusions from Warranty Coverage

  • Damage caused by accident.
  • Damage resulting from misuse, abuse, unauthorized alterations, or repairs.
  • If the serial number has been altered, defaced, or removed.

9.3. Customer Support

For any questions or support needs, please contact the seller where you purchased the product. Customer support is also available through Amazon for purchases made via that platform.

10. User Tips

  • Regular Charging: It is recommended to charge pagers at least once a month to maintain optimal battery health and prevent power loss.
  • Accessing Settings: To enter the setting mode, press and hold the 'Set' button for 3 seconds. This design prevents accidental changes during normal operation.
  • Proper Shutdown: When turning off the system, unplug the DC power adapter first to avoid the charging tray from unexpectedly turning back on due to residual electricity.
  • Customizable Alerts: Utilize the multiple reminder modes (buzzer, vibration, flash) to suit your environment. For instance, use vibration-only in quiet settings like churches to avoid disturbance.

11. Product Video Overview

Watch this video for a comprehensive overview of the Retekess TD173 Wireless Pager System, its features, and how it can enhance efficiency in various settings.

Video: Retekess TD173 Wireless Pager System Overview. This video demonstrates the features and applications of the pager system.

12. Package Contents

The standard package for the Retekess TD173 Wireless Pager System includes the following items:

Image showing package contents: transmit keyboard, 20 pagers, power adapter, user manual
Figure 9: Package Includes. The image displays the transmit keyboard, 20 pagers, a power adapter, and a user manual.
  • 1 x Transmit Keyboard
  • 20 x Pagers
  • 1 x Power Adapter
  • 1 x User Manual

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.