Aigo AC SE Series Integrated RGB CPU Liquid Cooler User Manual

1. Introduction

Thank you for choosing the Aigo AC SE Series Integrated RGB CPU Liquid Cooler. This all-in-one (AIO) liquid cooling system is designed to provide efficient and quiet cooling for your CPU, featuring vibrant RGB lighting and a maintenance-free design. This manual provides essential information for proper installation, operation, and maintenance of your cooler.

Image: Aigo AC SE 240 AIO Liquid Cooler showcasing its RGB fans and pump.

2. Safety Information

• Always disconnect power from your computer before installation or maintenance.
• Handle components with care to avoid damage.
• Ensure proper grounding to prevent electrostatic discharge.
• Keep the cooler away from direct sunlight, high temperatures, and moisture.
• Do not attempt to open the pump or radiator, as the liquid is sealed and maintenance-free.

3. Package Contents

Verify that all components are present in your package:

• 1 x Aigo AC SE Series Liquid Cooler (Radiator, Pump, and Fans pre-assembled)
• 1 x Thermal Paste syringe
• 1 x Installation Kit (various Intel/AMD fasteners, screws, backplates, clips, gaskets)
• 1 x User Manual

Image: Aigo AC SE 240 Liquid Cooler, its retail packaging, and all included accessories.

Image: Detailed view of the installation kit, including various screws, fasteners, and brackets for different CPU sockets.

4. Specifications

Image: List of compatible Intel and AMD CPU sockets.

Image: Detailed specifications including water block size, pump speed, radiator size, and fan details for the AC SE 240 model.

Image: Diagram showing the dimensions of the radiator (e.g., 270mm length, 120mm width, 27mm thickness).

Image: Diagram showing the dimensions of a single fan (120mm x 120mm x 25mm).

5. Setup and Installation

Follow these general steps for installing your Aigo AC SE liquid cooler. Refer to the included installation kit for specific brackets and screws for your CPU socket type.

1. Prepare the CPU: Clean the CPU surface thoroughly. Apply a small amount of the provided thermal paste to the center of the CPU.
2. Install the Backplate: Attach the appropriate backplate to the motherboard from behind, aligning it with the CPU socket holes.
3. Mount the Water Block: Secure the water block (pump) onto the CPU using the correct Intel or AMD fasteners and screws from the installation kit. Ensure even pressure.
4. Install Radiator and Fans: Mount the radiator to an available fan slot in your PC case (e.g., top, front, or rear). Attach the fans to the radiator using the fan screws, ensuring they are oriented for optimal airflow (intake or exhaust).
5. Connect Cables:
   
   • Connect the 3-pin pump cable to the CPU_FAN or AIO_PUMP header on your motherboard.
   • Connect the 4-pin fan cables to available fan headers on your motherboard. If using multiple fans, you may need a fan splitter (not always included).
   • Connect the RGB cables to your motherboard's RGB header or a dedicated RGB controller if available.
6. Cable Management: Route cables neatly to avoid interference with other components and to improve airflow.

For a visual guide, please watch the official installation video:

Video: Official installation guide for the Aigo AC SE liquid cooler.

6. Operating Instructions

The Aigo AC SE series coolers are designed for optimal performance with minimal user intervention.

• Automatic Fan Speed Control: The 12cm fans operate within an 800-1800 RPM range, adjusting speed based on CPU temperature via PWM (Pulse Width Modulation) control. This ensures higher airflow when needed and lower noise during light loads.
• Integrated RGB Lighting: The cooler features integrated RGB lighting on the fans and pump head. This can typically be controlled via your motherboard's RGB software (if compatible) or a dedicated controller (if included with your PC case or purchased separately).
• Efficient Cooling Design: The cooler incorporates an E-shape liquid channel design to enlarge the cooling area and improve circulation, a spraying type copper bottom for maximum contact with the CPU, and high-strength, leak-proof cooling pipes for reliable operation. The double pipe design of the water block ensures an unblocked channel effect.

Image: Diagram illustrating the E-shape liquid channel design within the radiator, which enhances heat exchange and circulation.

Image: Graphic indicating the 800-1800 RPM PWM fan speed range, adjusting for optimal airflow and noise.

Image: Cross-section diagram of the high-strength cooling pipes, showing the multi-layered construction for durability and leak prevention.

Image: Diagram showing the spraying type copper bottom of the water block, designed to maximize contact area and speed up liquid circulation.

Image: Illustration of the braided water cooling pipe, indicating its approximate length of 395mm, suitable for various PC case sizes.

Image: Diagram highlighting the double pipe design of the water block, which ensures an unblocked channel for efficient liquid flow.

Image: Close-up of the 9-blade cooling fan, equipped with anti-vibration pads for supreme efficiency and reduced noise.

7. Maintenance

The Aigo AC SE liquid cooler is designed to be maintenance-free regarding its liquid loop. The liquid is pre-filled and sealed, requiring no refilling or replacement throughout its lifespan.

• Dust Cleaning: Periodically clean the radiator fins and fan blades with compressed air to remove dust buildup. Dust can impede airflow and reduce cooling performance.
• Inspect Hoses: Occasionally check the cooling pipes for any signs of wear or damage. While designed for high strength and leak-proof operation, regular visual inspection is recommended.
• Fan Bearings: The fans use fluid dynamic bearings, which are designed for long life and quiet operation. No lubrication is required.

8. Troubleshooting

• No RGB Lighting: Ensure all RGB cables are securely connected to the motherboard's RGB header or a compatible controller. Check your motherboard's BIOS/UEFI settings or RGB software for control options.
• Fans Not Spinning/Pump Not Working: Verify that the fan (4-pin) and pump (3-pin) cables are correctly connected to the appropriate headers on your motherboard. Check BIOS/UEFI settings to ensure fan headers are enabled and configured correctly.
• High CPU Temperatures:
  
  • Ensure the water block is securely mounted to the CPU with even pressure.
  • Verify that thermal paste was applied correctly.
  • Check for proper airflow in your PC case; ensure fans are oriented correctly (intake/exhaust).
  • Clean any dust buildup on the radiator fins.
• Noise Issues: While designed for quiet operation, excessive noise might indicate:
  
  • Loose fan screws.
  • Dust buildup on fan blades.
  • Pump noise (if audible, ensure it's securely mounted and not vibrating against the case).

9. User Tips

• Pre-filled Liquid: The liquid is already filled and sealed, so there's no need to add or replace it.
• Fan & Pump Connections: Connect the fans to 4-pin headers and the pump to a 3-pin header (often labeled CPU_FAN or AIO_PUMP) on your motherboard.
• Compatibility Check: Always double-check the supported CPU sockets (Intel LGA 1700/2066/2011-3/2011/1151/1150/1155/1156/1366/1200 and AMD AM4/FM2+/FM2/FM1/AM3+/AM3/AM2+/AM2) before purchase and installation.

10. Warranty and Support

Aigo provides the following warranty for its AC SE series liquid coolers:

• Fans and CPU Radiator: 1-year warranty.
• Water Cooling Radiator, Power Supply, and Chassis: 3-year warranty.

For technical support or warranty claims, please contact your retailer or the official Aigo support channel.