CHENGHONG KTS-1050A

Contents

KTS-1050A Portable Wireless Bluetooth Speaker User Manual

Model: KTS-1050A | Brand: CHENGHONG

Introduction

Thank you for purchasing the CHENGHONG KTS-1050A Portable Wireless Bluetooth Speaker. This manual provides important information regarding the setup, operation, maintenance, and troubleshooting of your speaker. Please read this manual thoroughly before using the product to ensure proper function and to extend its lifespan.

KTS-1050A Portable Wireless Bluetooth Speaker front view with LED lights
Figure 1: KTS-1050A Portable Wireless Bluetooth Speaker

Package Contents

Please check the package for the following items:

  • 1 x KTS-1050A Portable Wireless Bluetooth Speaker
  • 1 x USB Charging Cable
  • 1 x User Manual (this document)

Product Overview

Familiarize yourself with the speaker's controls and ports:

Close-up of KTS-1050A speaker control panel showing MIC, OFF/ON, M, Previous, Play/Pause, Next, TF, USB, and DC 5V ports
Figure 2: Control Panel and Ports
  1. MIC Input: Connect an external microphone.
  2. OFF/ON Switch: Power the speaker on or off.
  3. M (Mode) Button: Switch between Bluetooth, FM Radio, USB, TF Card, and AUX modes.
  4. ◄◄ / V- (Previous/Volume Down): Short press for previous track/station; long press to decrease volume.
  5. ►► (Play/Pause): Play or pause audio. In FM mode, long press to auto-scan and save stations.
  6. ►► / V+ (Next/Volume Up): Short press for next track/station; long press to increase volume.
  7. TF (MicroSD) Card Slot: Insert a TF/MicroSD card for audio playback.
  8. USB Port: Insert a USB flash drive for audio playback.
  9. DC 5V (Charging Port): Connect the USB charging cable to charge the speaker.

Setup

1. Charging the Speaker

Before first use, fully charge the speaker. Connect the provided USB charging cable to the DC 5V port on the speaker and the other end to a USB power adapter (not included) or a computer's USB port. The charging indicator light will illuminate during charging and turn off when fully charged.

2. Power On/Off

To power on the speaker, slide the OFF/ON switch to the 'ON' position. To power off, slide it to the 'OFF' position.

Operating Instructions

1. Bluetooth Pairing

  1. Power on the speaker. It will automatically enter Bluetooth mode (indicated by a voice prompt or LED).
  2. Enable Bluetooth on your mobile device (smartphone, tablet, etc.).
  3. Search for available Bluetooth devices and select "KTS-1050A" from the list.
  4. Once paired, the speaker will emit a confirmation tone. You can now play audio from your device through the speaker.

2. TWS Function (True Wireless Stereo)

The TWS function allows you to connect two KTS-1050A speakers wirelessly for a stereo sound experience.

  1. Ensure both KTS-1050A speakers are powered on and in Bluetooth mode, and not connected to any device.
  2. On one of the speakers, long press the 'M' (Mode) button. You will hear a pairing tone.
  3. The two speakers will automatically pair with each other. Once paired, you will hear a confirmation tone.
  4. Now, connect your mobile device to one of the paired speakers via Bluetooth as described in the "Bluetooth Pairing" section. Both speakers will play audio in stereo.

3. FM Radio

  1. Power on the speaker and press the 'M' (Mode) button repeatedly until you enter FM Radio mode.
  2. Long press the '►►' (Play/Pause) button to automatically scan and save available FM stations.
  3. Use the '◄◄ / V-' and '►► / V+' buttons to navigate between saved stations.

4. USB/TF Card Playback

  1. Insert a USB flash drive into the USB port or a TF/MicroSD card into the TF card slot.
  2. The speaker will automatically switch to USB or TF card mode and begin playing audio files. If it doesn't, press the 'M' (Mode) button to select the correct mode.
  3. Use the '◄◄ / V-' and '►► / V+' buttons to skip tracks.

5. AUX Input

Connect an external audio device (e.g., MP3 player) using a 3.5mm AUX cable (not included) to the speaker's AUX input (if available, not explicitly shown on the provided control panel image but listed in functions). The speaker will automatically switch to AUX mode or require pressing the 'M' button.

6. Microphone Input

Connect a wired microphone (not included) to the MIC input port for karaoke or public address functions.

7. Volume Control

Long press the '◄◄ / V-' button to decrease volume and long press the '►► / V+' button to increase volume.

Video 1: Demonstration of KTS-1050A and KTS-1050B speakers, highlighting LED lights and controls.

Specifications

FeatureSpecification
Model NumberKTS-1050A
Product NameKTS-1050A Portable Music Wireless BT Speaker
BrandCHENGHONG
MaterialPlastic
ColorBlack
Speaker Size15 x 9.4 x 22 cm
Unit WeightApprox. 1.1 kg
Speaker Specification4 Inch x 5W x 1pc.
Bluetooth Version5.0
Input Power<25 W
Frequency Range100Hz-20KHz
Battery Capacity800mAh Li-ion rechargeable battery
FunctionsBluetooth, USB, TF Card, FM Radio, TWS, AUX, MIC Input
Built-in MicrophoneYes
Display ScreenNo
WaterproofNo
Intelligent Personal AssistantNone
Audio CrossoverFull-Range
Number of Loudspeaker Enclosure1
Power SourceBattery
Channels1.1
Support Memory CardYes

Troubleshooting

  • No Power: Ensure the speaker is charged. Connect the USB charging cable and allow it to charge for at least 30 minutes before attempting to power on again.
  • No Sound: Check the volume level on both the speaker and your connected device. Ensure the correct mode (Bluetooth, FM, USB, TF, AUX) is selected.
  • Bluetooth Pairing Issues: Make sure the speaker is in Bluetooth mode and not already connected to another device. Turn off and on your device's Bluetooth, then try pairing again. Move closer to the speaker.
  • FM Radio Reception Poor: Extend the speaker's antenna (if applicable, or reposition the speaker for better signal). Perform an auto-scan for stations again.
  • TWS Pairing Failure: Ensure both speakers are KTS-1050A models, powered on, in Bluetooth mode, and not connected to any other device before attempting TWS pairing.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the speaker's exterior. Do not use abrasive cleaners or solvents.
  • Storage: Store the speaker in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the speaker regularly, even if not in use for extended periods.
  • Water Exposure: This speaker is NOT waterproof. Avoid exposing it to water, rain, or excessive moisture.

User Tips

  • For optimal sound quality, place the speaker on a stable surface.
  • When using the microphone, avoid placing it too close to the speaker to prevent feedback.
  • Experiment with speaker placement for the best audio experience in different environments.
  • Keep the speaker charged to ensure it's always ready for use, especially before outdoor activities.

Warranty and Support

For warranty information or technical support, please refer to the seller's policies or contact the point of purchase. Keep your purchase receipt as proof of purchase.

© 2023 CHENGHONG. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.