1. Safety Information
Warning: Electrical products involve potential risks of electric shock, fire, and personal injury if installed or used improperly. All operations related to this product, including installation, maintenance, and replacement, must be performed in strict accordance with the requirements of this manual, relevant EU directives, harmonized standards, and local electrical codes. Failure to comply with the safety regulations and operating instructions may result in serious consequences such as electric shock, fire, or product damage, and the manufacturer shall not be liable for any losses arising therefrom.
- For Professional Installation Only: Installation must be performed by a qualified electrician in accordance with IEC 60364 wiring regulations and local electrical codes.
- Voltage & Current Compatibility: Use this product only with AC supply voltage up to 250V and rated current not exceeding 16A (sockets) /16A (switches) or as marked on the product.
- Protection Against Electric Shock: Do not touch live parts. Ensure power is disconnected before installation or maintenance. Keep children away from the product; the socket is equipped with a child-resistant shutter that requires a minimum force of 40N for operation.
- Environmental Restrictions: Avoid installation in humid environments (unless marked with IPX4 or higher protection rating) or areas exposed to direct sunlight, high temperatures, or corrosive substances.
- Fire Safety: The product housing is made of V-1 grade flame-retardant material that passes the 850°C glow wire test. Do not cover the product during use to prevent overheating.
2. Product Overview
Key Features
- Complies with EN 60669-1:2021 (switches) and EN 60884-1:2013+A1:2015+A2:2019 (sockets) harmonized standards.
- Socket with child-resistant shutter design to prevent single-pole insertion.
- Switch with mechanical durability of 40,000 operating cycles and terminal temperature rise limited to ≤45K.
- Phosphor bronze contact components ensuring stable electrical connection and corrosion resistance.
- Tempered Glass Panel: The frame is made of tempered glass, offering durability and a stable aesthetic.
- Real Glass: Features a genuine glass surface.
- No Scratch: 9H Hardness ensures the panel is highly resistant to scratches.
- Safe Door For Kids: Designed to prevent single-hole insertion, protecting children from electric shock.
- Copper Material: Internal components are made of tin phosphorus copper alloy for good conductivity, safety, and stability.
Product Video
Demonstration of the Wallpad switch operation.
Symbol Explanation
- CE Mark: A safety compliance mark indicating the product meets the essential requirements of relevant EU directives.
- UKCA Mark: Indicates the product meets the access requirements of the UK market.
3. Installation Instructions
Preparation
- Verify that the installation environment meets the product's protection rating requirements.
- Check that the product is undamaged and all components are intact before installation.
- Prepare tools including screwdrivers, wire strippers, and voltage testers.
Wiring Steps
- Turn off the main power supply and confirm no voltage with a tester.
- Strip the wire insulation (8-10mm) without damaging the conductor.
- For sockets: Connect the live wire (L) to the terminal marked "L", neutral wire (N) to "N", and protective earth (PE) to the earth terminal (green-yellow wire). Ensure wire connections are secure with no loose strands.
- For switches: Connect the input live wire to the "IN" terminal and the output wire to the "OUT" terminal.
- Fix the product to the mounting box using the provided screws, ensuring it is firmly attached without tilting.
- Install the front panel and tighten the fixing screws gently.
Wiring Diagram Reference

Size & Mounting Box

Post-Installation Check
- Confirm all wiring is correct and terminals are tightened.
- Restore power and test the switch operation and socket functionality with a compatible device.
- Check for abnormal heating, sparking, or unusual noise during operation.
4. Operating Instructions
Switch Operation
- Toggle the switch to the "ON" (I) position for power supply and "OFF" (O) position to cut off power.
- For illuminated switches, the indicator light will be on when the switch is in the "OFF" position (if applicable).
- Do not toggle the switch frequently in a short period to avoid damage to the internal mechanical structure.
- Rocker Button: Press the downside to turn on the light and press the upside to turn off.
- Fluorescent Indicator: The fluorescent indicator absorbs light energy and will glow in darkness.


Socket Usage
- Insert the plug firmly into the socket until it clicks into place, indicating that the child-resistant shutter is fully opened and the connection is secure.
- Do not force the plug or use adapters that do not comply with EN 50075.
- When pulling out the plug, hold the plug body and pull it straight out; do not pull the power cord to avoid damaging the cord or the socket.
- This product supports various standards including EU, UK, MF, and Italian sockets.
- For models with USB Charge Ports, they provide 5V 2100mA output.
- For Dimmer Switch models: Works for Incandescent lamps 220V 500W. Not compatible with LED lamps.
5. Maintenance
Regular Maintenance
- Inspect the product quarterly for signs of damage, loose connections, or discoloration.
- Clean the surface with a dry, soft cloth; do not use water, gasoline, alcohol, or other chemical cleaners that may corrode the product housing.
- If dust accumulates in the socket hole, use a dry brush to clean it gently.

Replacement Criteria
Replace the product immediately if any of the following occurs:
- Damaged housing
- Loose terminals
- Failed shutter function
- Abnormal heating during use
- Sparking when switching on/off
- The switch cannot stay in the on/off position stably.
6. Troubleshooting
If you encounter any issues with your Wallpad switch or socket, consider the following:
- No Power: Ensure the main power supply is on and all wiring connections are secure. Check for tripped circuit breakers or blown fuses.
- Intermittent Operation: Verify that plugs are fully inserted into sockets and that there are no loose wire connections.
- Overheating/Sparking: Immediately disconnect power. This could indicate an overload or faulty wiring. Do not use the product until inspected by a qualified electrician.
- Switch Not Responding: Check if the switch mechanism is physically damaged or if the internal wiring is loose.
- Dimmer Not Working with LED: As specified, dimmer switches are not compatible with LED lamps. Ensure you are using incandescent lamps.
7. Specifications
| Parameter | Specification |
|---|---|
| Rated Voltage | 110V/220/250V~ 50/60Hz |
| Rated Current | Sockets: 10A/16A; Switches: 10A/16A/20A/45A |
| Insulation Voltage | 2000V AC (1 minute without breakdown) |
| Protection Rating | IP20 (standard) / IPX4 (waterproof version) |
| Mechanical Life | Sockets: 5000 insertion/extraction cycles; Switches: 40,000 operating cycles |
| Flame Retardancy | V-1 grade (IEC 60695-11-10) |
| Panel Material | Tempered Glass |
| Panel Size | 118*75mm |
| Mounting Hole Distance | 83.5mm |
| Color | Black |
| Base Material | Fire retardant PC |
| Inside Material | Pure Copper Pieces With Larger Silver Contacts |
| Indicator | Fluorescence |
| USB Charge Port Output | 5V 2100mA (for applicable models) |
Copper Material Details


8. User Tips
- The tempered glass panel is generally well-regarded for its elegant appearance and quality, with no common issues reported regarding fingerprint marks.
- Users have found the product beautiful, easy to look at, and straightforward to assemble.
- The plugs are noted to be compatible with American/Italian type boxes and European plugs, offering a versatile solution for different standards.
9. Compliance & Related Certifications
This product is marked with the CE mark (minimum height 5mm) and UKCA mark in accordance with relevant regulations. It has also obtained REACH certification.
Applicable EU Directives
- Low Voltage Directive (LVD): 2014/35/EU
- Electromagnetic Compatibility Directive (EMC): 2014/30/EU
- Restriction of Hazardous Substances (RoHS): 2011/65/EU (including 4 new phthalates added in 2025)
- Waste Electrical and Electronic Equipment (WEEE): 2012/19/EU
- REACH Regulation: (EC) No 1907/2006
Applicable Harmonized Standards
- EN 60669-1:2021: Switches for fixed electrical installations for household and similar purposes - Part 1: General requirements
- EN 60884-1:2013+A1:2015+A2:2019: Plugs and socket-outlets for household and similar purposes - Part 1: General requirements
- EN 60884-2-4:2007: Plugs and socket-outlets - Part 2-4: Particular requirements for combined socket-outlets with switches
- EN 55014-1: Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
- EN 55014-2: Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity
Declaration of Conformity
The manufacturer declares under sole responsibility that this product meets the essential requirements of the above-mentioned EU directives, UK relevant regulations and harmonized standards, and has obtained CE, UKCA and REACH certifications. The complete technical documentation is held by the EU Authorized Representative and is available for inspection by the competent authorities of the EU and UK.
10. Warranty & Support
Disposal Information
This product is classified as electrical and electronic waste (WEEE). Do not dispose of it with household waste. Return it to a designated WEEE collection point or contact the retailer for proper disposal, in compliance with EU WEEE Directive 2012/19/EU.
Warranty
The product comes with a 2-year warranty from the date of purchase, covering manufacturing defects. The overall product warranty is 10 years. It does not include damage caused by improper installation, misuse, modification, or normal wear and tear. For warranty claims, please contact the manufacturer with the original purchase receipt and product serial number.
Manufacturer Information
Manufacturer: WenZhou Wallpad Electric Co., LTD
Address: No.86 Jin Feng Xi Lu, Tian He Street, Long Wan Qu, Wen Zhou City, Zhejiang Province, China
Postal Code: 325000
Contact Phone: 86-15167890330
Email: 278907249@qq.com
EU Authorized Representative
Representative: Humiss International B.V.
Responsible Region: European Union
Responsible Person Country: Netherlands
Address: Joop Geesinkweg 701, Amsterdam-Duivendrecht, the Netherlands
Contact Phone: +31-(0)20 369 8116
Email: business@humiss.com
For further detailed information, please refer to the official user manual PDF: User manual (PDF)