1. Introduction
Thank you for purchasing the SHEHDS LED Beam+Wash Moving Head Light. This professional stage lighting effect combines powerful beam and wash capabilities with a unique "Bees Eyes" design, featuring 6x15W RGBW LEDs. It is designed for various applications including DJ clubs, parties, KTVs, and concerts, offering multiple DMX modes for versatile control. Please read this manual thoroughly before operation to ensure safe and correct usage.
2. Safety Information
To prevent electric shock or fire, do not expose this unit to rain or moisture. Ensure all connections are made correctly before plugging the unit into a power outlet. This unit is for indoor use only (IP20). Do not operate in environments outside the specified ambient temperature range (-20°C to 40°C). Always disconnect from power before cleaning or servicing. Avoid direct eye exposure to the light source.
- Read all instructions carefully before installation and operation.
- Keep this User Manual for future consultation.
- Ensure the power supply matches the voltage requirements of the device.
- Do not attempt to repair the unit yourself. Refer all servicing to qualified personnel.
- Keep the device away from flammable materials.
- Ensure proper ventilation around the unit.
3. Package Contents
Verify that all items listed below are included in your package:
- 1 x Six Eyes Laser Beam RGBW Moving Head Lighting Unit
- 1 x Power Cable (1.2m)
- 1 x DMX Cable (1.2m)
- 1 x Fixed Lock
- 2 x Screws
- 1 x Instruction Manual
4. Product Overview
Familiarize yourself with the main components and controls of your moving head light.
- Display Screen: Shows current mode and settings.
- Menu Button: Accesses the main menu.
- Up/Down Buttons: Navigate through menu options and adjust values.
- Enter Button: Confirms selections.
- MIC: Microphone for Sound Active mode.
- Cooling Fans: Ensure proper heat dissipation.
- Power In: Connects to the main power supply.
- DMX IN/OUT: For DMX512 control signal connection.
5. Setup
5.1 Mounting
The fixture can be mounted in various positions (e.g., truss, floor). Ensure the mounting surface or structure can support the weight of the fixture. Use the provided fixed lock and screws for secure installation. Always use a safety cable when mounting overhead.
5.2 Power Connection
Connect the provided power cable to the "Power In" port on the rear of the unit and then to a suitable AC power outlet (AC100V-240V, 50/60Hz). Ensure the power source is stable and meets the device's requirements.
5.3 DMX Connection (Optional)
For DMX control, connect a DMX controller to the "DMX IN" port using a standard 3-pin DMX cable. If linking multiple units, connect the "DMX OUT" of the first unit to the "DMX IN" of the next, and so on. Terminate the last unit in the chain with a DMX terminator.
6. Operating Instructions
The moving head light offers several control modes:
- DMX512 Mode: Allows precise control over all functions (Pan, Tilt, RGBW colors, Dimmer, Strobe, etc.) using a DMX controller. Refer to the DMX channel chart (not provided in source, but implied by "13 DMX Channels") for specific channel assignments.
- Auto Run Mode: The fixture will cycle through pre-programmed light shows automatically. Use the display and buttons to select different auto programs.
- Sound Action Mode: The light will react to music or sound picked up by the built-in microphone. Adjust sensitivity if needed.
- Strobe Mode: Activates a flashing effect. The flash rate can be adjusted from 0-20Hz.
- Stand Alone Mode: Operates independently using its internal programs.
- Master/Slave Mode: Link multiple units where one acts as the master (controlling unit) and others as slaves (following the master's commands). Connect DMX cables in a daisy chain, set the master unit to a desired mode (e.g., Auto Run, Sound Action), and set slave units to slave mode.
Use the MENU, UP, DOWN, and ENTER buttons on the display panel to navigate through modes and settings.
7. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your device.
- Cleaning: Periodically clean the lens and housing with a soft, lint-free cloth. Do not use alcohol or solvents. Ensure the unit is unplugged before cleaning.
- Cooling Fans: Keep the cooling fans free from dust and debris to prevent overheating.
- Storage: When not in use, store the fixture in a dry, dust-free environment, preferably in its original packaging or a protective case.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cable not connected, faulty outlet, blown fuse. | Check power cable connection. Test outlet. Check/replace fuse if accessible and safe. |
| No DMX control | Incorrect DMX address, faulty DMX cable, no terminator, incorrect mode. | Verify DMX address. Check DMX cable integrity. Ensure DMX terminator is used. Set fixture to DMX mode. |
| Light not moving/responding | Incorrect mode, DMX signal issue, internal error. | Check operating mode. Troubleshoot DMX connection. Power cycle the unit. |
| Overheating | Blocked cooling vents, insufficient ventilation. | Ensure vents are clear. Provide adequate space around the fixture for airflow. |
9. User Tips
- For best beam effects, use in conjunction with a fog or haze machine.
- Experiment with different DMX channel settings to unlock the full potential of the light's movements and color mixing.
- When using Sound Action mode, place the light near the sound source for optimal responsiveness.
10. Specifications
| Feature | Detail |
|---|---|
| Power Supply | AC100V-240V, 50/60Hz |
| Power Consumption | 90W |
| Color Temperature | 6500K |
| Beam Angle | 120 Degrees |
| Control Modes | DMX512, Auto Run, Sound Action, Strobe, Stand Alone, Master/Slave |
| Strobe Flash Rate | 0-20Hz |
| DMX Channels | 13 DMX Channels |
| Tilt Movement | 270° (16bit) |
| Pan Movement | 540° (16bit) |
| Dimmer | 0-100% Mechanic Dimmer |
| LED Lifespan | > 60,000 Hours |
| Waterproof Level | IP20 (Indoor Use) |
| Ambient Temperature | -20°C to 40°C |
| Cooling System | Air-cooled, Box Heat Conduction |
| Shell Material | Flame-retardant Engineering Plastic Shell |
| Product Color | Black |
| Product Size (L x W x H) | 30 x 25.5 x 20 cm |
| Product Weight | 3.2 kg |
| Package Size (L x W x H) | 33 x 28 x 23 cm |
| Package Weight | 4 kg |
11. Warranty and Support
This product comes with a 1-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims. For technical support or warranty inquiries, please contact your retailer or the manufacturer directly. Do not attempt to open or repair the unit yourself, as this will void the warranty.
For further assistance, please refer to the contact information provided by your seller.